Safavieh Furniture Finola BED8002-F User manual

Product Dimensions :58"W x 83"D
x 54"H
PIECE QUANTITY
A 1X
B 2X
C 6X
D 6X
E 6X
4X
G 4X
H 4X
I 1X
J 2X
K 2X
L 1X
M 2X
N 3X
O 6X
P 2X
Q 8X
R 4X
S 6X
T 1X
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear
the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Model # BED8002-
Part List and Hardware List
DESCRIPTION PICTURE
HEADBOARD
WOODEN LEG
BOLT 8X40
WASHER M8
RING M8
BOLT 8X60
WASHER M8
RING M8
ALLEN KEY
L-RAIL
R-RAIL
OOTBOARD
SIDERAIL LEGS
SLATS
SUPPORT LEGS
IRON PLATE
SCREW 6X1
SCREW 6X1 1/4
WRENCH
SCREW 6X1 3/4

Step 1
Step 2
Joint the 2 siderails (J) & (K). Using screw driver (not included) to lock with screws (Q).
Attach siderail leg (M) to the 2 rails (J) & (K). Using screw driver (not included) to lock
with another screws ®.
Step 3 Step
Attach 2 siderails to the headboard (A) assembled with wooden legs (B) and the
Attach 2 support legs (O) to each slats (N).
footboard (L) Attach slats to the siderails support.
Tightened the bolts in wooden legs using Allen Key.
Tightened the bolts in footboard corners using wrench.
Attach the two legs (B) to the headboard (A) using 6 bolts (C ), 6
washers and 6 rings. Others 6 bolts, washers and rings are attached on
The hardware needed to connect the legs (B) to the headboard (A) are
bolt (C), washer (D) and ring (E)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
4
C
D
E
A
B
J K
Q
S
M
F
G
H
N+O
R
S
R
L

Product Dimensions :63"W x 83"D
x 54"H
PIECE QUANTITY
A 1X
B 2X
C 6X
D 6X
E 6X
4X
G 4X
H 4X
I 1X
J 2X
K 2X
L 1X
M 2X
N 3X
O 6X
P 2X
Q 8X
R 4X
S 6X
T 1X
SCREW 6X1 3/4
WRENCH
IRON PLATE
SCREW 6X1
SCREW 6X1 1/4
SLATS
SUPPORT LEGS
OOTBOARD
SIDERAIL LEGS
ALLEN KEY
L-RAIL
R-RAIL
BOLT 8X60
WASHER M8
RING M8
BOLT 8X40
WASHER M8
RING M8
DESCRIPTION PICTURE
HEADBOARD
WOODEN LEG
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear
the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Model # BED8002-Q
Part List and Hardware List

Step 1
Step 2
Joint the 2 siderails (J) & (K). Using screw driver (not included) to lock with screws (Q).
Attach siderail leg (M) to the 2 rails (J) & (K). Using screw driver (not included) to lock
with another screws ®.
Step 3 Step
Attach 2 siderails to the headboard (A) assembled with wooden legs (B) and the
Attach 2 support legs (O) to each slats (N).
footboard (L) Attach slats to the siderails support.
Tightened the bolts in wooden legs using Allen Key.
Tightened the bolts in footboard corners using wrench.
The hardware needed to connect the legs (B) to the headboard (A) are
bolt (C), washer (D) and ring (E)
Attach the two legs (B) to the headboard (A) using 6 bolts (C ), 6
washers and 6 rings. Others 6 bolts, washers and rings are attached on
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
4
C
D
E
A
B
J K
Q
S
M
F
G
H
N+O
R
S
R
L