Safavieh Furniture Ida BCT2500 User manual

NOTICE
* Please make sure that you have all parts indicated and they are in good condition before
you begin assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
*This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail]
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
Model # BCT2500
Product Dimensions: 23"Wx23"Dx36.25"H
CARE AND MAINTENANCE
Dust with a soft, dry cloth.Do not use abrasive cleaner. To clean glass, spray a small amount
of glass cleaner onto a lint-free cloth and wipe glass clean. Wipe spills immediately.
Maintain with regular dusting and clean with mild soap and water, dry thoroughly and do
not use a brass cleaner. Adhesive felt pads should always be used/applied in order to
prevent damage to the furniture or surfaces on which the furniture is placed.
Part List and Hardware List
Piece Description Picture Quantity
A Top 1X
B Middle Bar 4X
C Shelf 1X
D Leg 4X
E Caster 4X
F Mirror 2X
HW1 Glass Mat 8X
HW2 Wrench 1X

Preparation
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 10 minutes.
*Tools Required for Assembly (included):Wrench
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Step 1
Place top (A) upside down on ground, then screw middle bars (B),
shelf (C) and legs (D) one by one. Screw caster wheels (E) onto
bottom of legs.
Step 2
Place assembled piece right-side up, place glass mat (HW1) onto frame of
top (A) then place mirror (F) on top and shelf (C).