Safavieh Furniture Kaisley OCH1300 User manual

CARE AND MAINTENANCE
NOTICE
4X
B 1X
4X
C 5X
The base and hardware are located under the chair
4X
1X
A1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
1X
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
CARE AND MAINTENANCE
HW1
HW2
HW3
HW4
Chassis
Seat
OCH1300
Dimensions:24.41"W*26.97"D*36.96~39.7"H
Weight Capacity: 275 lbs
Caster
D Air Bolt Pole
Allen Key
Split Lock Washer(M6)
Flat Washer(M6)
Socket Screws 6 *1.05*30MM
Lever Mechanism
E
1X
FURNITURE

PREPARATION
HW2 HW1 HW3
The base and hardware are located under the chair
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.If any part is missing or
damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP1 OPEN THE CARTON BOX AND REMOVE
THE SEAT BODY, PARTS AND HARDWARE
PACK.
STEP3 PUT THE WASHERS ON THE BOLT IN
THE ORDER SHOWN IN THE PICTURE
STEP5 CONNECT THE SEAT BODY A AND THE
ASSEMBLED BASE B WITH THE AIR BOLT POLE D
AS SHOWN.
STEP6 FINISHED.
A
STEP2 ATTACH THE FIVE CASTER C TO THE
CHASSIS B AS SHOWN.
B
C
C
C
C
C
HW4
E
STEP4 CONNECT THE LEVER MECHANISM E
WITH SEAT BODY A AS SHOWN.
A
D
B
A
HW2 HW1 HW3