Safavieh Furniture Ray BST1402 User manual

NOTICE
* Please make sure that you have all parts indicated and they are in good
hardware list below for guidance.
the finish during assembly.
* If you are having difficulty, our friendly Customer Care team is always
here to help. Please email [email protected]
PREPARATION
* Before beginning assembly of product, make sure all parts are present.
Compare parts with part contents list and hardware contents list.
product
30 minutes.
* Tools required for assembly (included) : Allen key
CARE AND MAINTENANCE
spill immediately and avoid common hazards such as hot dishes, harsh
cloth dampened with water or furniture polish.
Item Id : BST1402
Product Dimensions : 20.66” W x 17.12” D x 34.25” H
Weight capacity - 236 LBS
Warning : Do not stand on chair.
Warning : Do not over torque bolts.
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
ASeat Frame 1x
B Leg Frame 2x
CStretcher (Short) 2x
D Stretcher (Long) 2x
E Plate Panel 1x
HW 1 Jcbc Bolt M6x0.5x20mm 8x
HW 2 Flat Washer 8x
HW 3 Spring Washer 8x
HW 4 Swivel Plate 1x
HW 5 JcbcW Bolt M7x3.0x40mm 12x
HW 6 Allen key (Long) 1x
HW 7 8x

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated assembly me : 30 minutes
* Tools required for assembly (included) : Allen key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
Step 1 : Screw both le and right leg to the
stretchers (long and short).
Step 2 : Place the swivel plate to the plate
panel and ghten it with the bolts.
Step 3 : Screw the pre-assembled plate panel
(step 2) with the seat frame. Turn around the
plate panel to posion the screw into places.

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated assembly me : 30 minutes
* Tools required for assembly (included) : Allen key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
Step 4 : Place the assembled leg (step 1) to the seat frame (step 3).
Screw it with the bolts.
Step 5 : Upright the chair and place the wood buon to cover the screw
hole.