Safavieh Furniture SEA8018 User manual

PIECE QUANTITY
A 1X
B 1X
C 2X
DESCRIPTION
PICTURE
SEAT PART
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear the
furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
SCREWS
Model # SEA8018
Part List and Hardware List
Product Dimensions : 19"W x 24"D x 41"H
BACK REST
FRONT LEGS
D + E
C
D + E
A
B
F
4
D + E D + E
C 2X
D 6X
E
6X
F 1X
G 1X
BLACK FABRIC
SCREWS
RING
SPANNER
FRONT LEGS
D + E
C
D + E
A
B
F
4
D + E D + E

Step 1 Step 2
No tighten yet
Take the Back Part (B) and joined with the Seat Part (A) and screw it
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Take all the packaging off the item.
Take the two front Legs (C) and screw them on the Seat Part. (A)
D + E
C
D + E
A
B
No tighten yet
Step 3
Step 4
Take the Black Fabric (F) and fix at the bottom of the chair with the
velcrow
Take the Back Part (B) and joined with the Seat Part (A) and screw it
Put the Chair on thesurface plate for leveling of the legs and do
the tighten all the screws
F
4
D + E D + E