Safavieh Lighting FLL4024A User manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
C.D nut.washer 2X E Base 1X
F steel plate 1X K RING 5X
A Werench key 1X M Shade 5X
B.H SCREW 2X L Bulb 5X
B.C.D.E
.F.G.H.I.
J
Lamp 1X
Model# FLL4024A
Product Dimensions: 35.5"D*85" H
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician.never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed

1.Carefully remove all lamp parts from the box,lay all parts on a
flat surface. please see list of items included in box below.
2.Insert tube(G) to base steel plate(F) and secure by sliding in
washers(C.D) and screw (B) using wrench key(A)-(INCLUDED)
3.Stand the now assembled base onto a flat surface.
4.Insert arc part(I) into tube(G) and secure with screws(H).
5.Insert the shade(5x)-(M) into the socket(5x)-(J).then tighten the
ring(5x)-(K)into the socket(5x)-(J).
6.Insert the bulb(5x)-(L) into the socket(5x)-(J).
ENJOY YOUR LAMP
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 9-WATT OR LED BULB MAX 4-WATT.THERE IS LED
4-WATT BULB IN THE BOX.