Safavieh Outdoor PAT6756 User manual

CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure all parts are included before you begin assembly of this item.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
Parts List and Hardware List
O U T D O O R
Item# PAT6756
Product dimensions: 13,80”W x 25.6”D x 50,39”H
ASSEMBLY INSTRUCTIONS FOR SAFAVIEH
GRIFFEN BALCONY DINNING CABINET
THE DESIGN OF GRIFFEN BALCONY DINNING CABINET IN
THE DRAWINGS MAY VARY FROM ACTUAL, BUT ASSEMBLY CAN
BE APPLIED FOR THIS ITEM
Weight Capacity: 220 lbs
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
ID Q.tysPICTURE & DESCRIPTION ID Q.tysPICTURE & DESCRIPTION
A
M1
M2
SHELF FRAME
4X
1X
1X
B
C
1X
2X
BASE
CHAIRS
All manuals and user guides at all-guides.com

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly: Allen Key (included)
Step 1: Fix the base to low balcony frame as shown, then secure
using screw (M1). Fully tighten using allen key (M2)
Step 2: Rotating the table top
to upright, then tighen the bolt
to fix table top to the shelf
Step 3: place these chairs
as shown The assembly is now completed.
M1
M1
M1
M1
All manuals and user guides at all-guides.com