Safavieh Outdoor PAT9037 User manual

PIECE QUANTITY
DESCRIPTION PICTURE
*Please make sure that you have all parts indicated and they are in good condion before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a so surface to prevent scratching the finish during
assembly.
*This item may require periodic ghtening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [email protected]
A
B
C
D
HW1
HW2
HW3
HW4
HW5
6
6
12
1
1
1
1
4
2
*Before beginning assembly of product, make sure all parts are present. Compare parts with part
contents list and hardware contents list.
*If any part is missing or damaged, do not aempet to assemble the product.
*EsmatedAssemblyTime:30minutes.
*ToolsRequiredforAssembly(included):AllenKey
Table Top
C onnector
Table Leg
Bracket
Hexagon Socket Screw
HEX
Allen Key
Wrench
6x0.5x35mm
Hexagon Socket Screw
6x0.5x50mm
6mm
NOTICE
PREPARATION ITEM NO.:PAT9037
ITEM DIMENSION:62.22”x35.56”x32”
CARE AND MAINTENANCE
Part List and Hardware List
Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from
standing water. Dust regularly with small brush or vacuum. Spills should be taken care of
immediately before they harden or stain with a slightly dampened sponge.
Weight Capacity: 300LBS
Warning: Do not stand on the table
Warning: Do not over torque bolts

*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
*If any part is missing or damaged, do not aempt to assemble the product.
*Esmated Assembly Time: 30 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
*Gradually ghten bolts in a star paern: ghten one bolt and then the one opposite from it unl all bolts are ghtened.
STEP2: STEP3:STEP1:
PREPARATION
HW3 x 4
HW4 x 4 HW1 x 2
HW4 x 2
HW2 x 8
HW4 x 8
Assemble the table leg(C) to the table top(A),using
bolt(HW1) and Allenkey(HW5). Assemble the Connector(B) to the table Leg(C), using bolt(HW1),bolt (HW2),nut(HW3) , wrench
(HW4) and Allenkey(HW5).
Assemble the bracket(D) to the Connector(B) and
table top(A),using bolt(HW1),bolt (HW2),nut(HW3) ,
wrench (HW4) and Allenkey(HW5).
HW1
HW2
HW3
HW1
HW2
HW3