Safavieh Outdoor PAT6759 User manual

Part List and Hardware List
MODEL# PAT6759
Corner chair dimension: 27.17”W x 29.33”D x 26.77”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
PIECE DESCRIPTION PICTURE QUANTITY
NOTICE
Warning : Do not torque bolts / screws
Warning : Do not stand on the chair
Weight capacity : 300 lbs
Footrest dimension : 25.59”W x 25.59”D x 11.81”H
Table dimension : 26.77”W x 17.72”D x 21.65”H
1x 2x
1x 4x
1x 1x
1x 4x
1x
1x
1x
2x
20x
Right side Foot leg
Table top
Table leg
Foot top
Right arm side
Top back
Left side
Left seat
Allen bolt
Right seat
PIECE DESCRIPTION PICTURE QUANTITY
A
B
J
C
K
D
L
E
F
H1
H2
H4
G
Extra bolt
H3
M6x70
M6x50
Wrench 1x
1x
Allen key
Left arm side
Support back 2x
I
M

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and Wrench.
PREPARATION
Step 2: Put the Support back (I) to the Right arm side (A) then
attach the Right side (B) to the Right seat (C) ,Top back (G)
and the Support back (I) as shown on the picture . Using the
Allen nut (H1) and tighten with the Allen key (H3) and the Extra
Step 1: attach the Right arm side (A) to the Right seat (C) ,Top back
(G) as shown the picture.Using the Allen nut (H1) to tighten all with
the Allen key (H3) and the Extra bolt (H2) as shown on the picture.
1
H1
H1
G
H1
H1
H1
H1
H1
A
C
A
H1
2
H1
H1
H1
H1
H1
H1
H1
CC
B
A
H3
H2
H1
H1
H2
H1
Make sure to tighten all the Allen nut (H1) before continue to step 2.
I
G
bolt (H2) .

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and wrench.
PREPARATION
FG
D
H1
H1
E
G
ID
F
H1 H1
H1
H1
H1
H1
H1
Step 3: attach the Left arm side (D) to the Left seat (F) ,Top back
(G) as shown the picture.Using the Allen nut (H1) to tighten all with
the Allen key (H3) and the Extra bolt (H2) as shown on the picture.
Make sure to tighten all the Allen nut (H1) before continue to step 2.
34
H1 H3
H2
H1
H1
H2
H1
Step 2: Put the Support back (I) to the Left arm side (D) then
attach the Left side (E) to the Left seat (F) ,Top back (G)
and the Support back (I) as shown on the picture . Using the
Allen nut (H1) and tighten with the Allen key (H3) and the Extra
bolt (H2) .
H1 H1
H1
H1
H1
H1
H1

5
H1
H1
H1
H1
K
K
J
H1
H1
H1
H1
H1
H1
K
J
Step 5: attach the Foot legs (K) to the Foot top (J) by using the Allen nut (H1) and tighten it by using the Allen key
(H3) and the extra bolt (H2) as shown on the picture.
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and wrench.
PREPARATION
H3
H2
H1
H1
H2
H1

67
Step 6: attach 4 legs (M) to the Table top (L) as shown on the
picture by remove nut and washer from the leg.
Step 7: Use the wrench (H4) to tighten all 4 legs as shown on
the picture.
LM
L
M
M
M
M
H5
M
L
L
M
M
M
M
H4
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and wrench.
PREPARATION