Safavieh Outdoor Lorma PAT7514 User manual

Table Top Frame
Table Leg
Table Side Frame
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
QUANTITY
PIECE
1X
DESCRIPTION PICTURE
1X
1X
1X
1X
1X
2X
2X
1
2
3
5
7
9
10
11
2X
2X
1X
12
13
16
Flat washer
Allen key
29X
2X
C
D
Allen bolt(M6x30 mm) 21X
A
Allen bolt(M6x40 mm) 8X
B
Table Glass
Bench/Chair Right Frame
Bench Back Frame
Bench Seat Frame
Bench Front Frame
Bench/Chair Left Frame
Chair Back Cushion
Chair Seat Cushion
Model# PAT7514 - 1/2
Product Dimensions:
32.28"x55.12"x33.46" H (Bench)
32.28"x29.92"x33.46" H (Chair)
27.95"x51.18"x16.54" H (Table)
1-3
Weight Capacity : 275 Lbs (single seat)
550 Lbs (towperson seat)
Warning : Do not stand on table
Warning : Do not over torque bolts/screws

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
2-3
Table Top Frame
Table Leg
Table Side Frame
QUANTITY
PIECE DESCRIPTION PICTURE
1X
2X
2X
9
10
11
16
Flat washer
Allen key
14X
1X
C
D
Allen bolt(M6x30 mm) 14X
A
Table Glass 1X
Weight Capacity : 275 Lbs (single seat)
550 Lbs (towperson seat)
Warning : Do not stand on table
Warning : Do not over torque bolts/screws

1 2
34
Step 1
Connect Table Top Frame (9) & Table Leg (10), Table Side Frame
(11) & tighten Bolt (A) with Allen key (D)
Step 2
Connect part from Step 1 & Table Side Frame (11) tighten Bolt (A)
with Allen key (D)
Step 3
Connect part from Step 2 & Table Leg (10) tighten Bolt (A) with
Allen key (D)
Step 4
Puton Table Glass (16) to complete Table
3-3
9
10 11
11
10
16
A
C
A
C
A
C
C
A
C
A
AA
CCC
C
AC
AA
C
C
9

Table Top Frame
Table Leg
Table Side Frame
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
QUANTITY
PIECE
1X
DESCRIPTION PICTURE
1X
1X
1X
1X
1X
2X
2X
1
2
3
5
7
9
10
11
1-5
2X
2X
1X
12
13
16
Flat washer
Allen key
29X
2X
C
D
Allen bolt(M6x30 mm) 21X
A
Allen bolt(M6x40 mm) 8X
B
Table Glass
Bench/Chair Right Frame
Bench Back Frame
Bench Seat Frame
Bench Front Frame
Bench/Chair Left Frame
Chair Back Cushion
Chair Seat Cushion
Model# PAT7514 - 1/2
Product Dimensions:
32.28"x55.12"x33.46" H (Bench)
32.28"x29.92"x33.46" H (Chair)
27.95"x51.18"x16.54" H (Table)
Weight Capacity : 275 Lbs (single seat)
550 Lbs (towperson seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
2-5
QUANTITY
PIECE
1X
DESCRIPTION PICTURE
1X
1X
1X
1X
1
2
3
5
7
2X
2X
12
13
Flat washer
Allen key
15X
1X
C
D
Allen bolt(M6x30 mm) 7X
A
Allen bolt(M6x40 mm) 8X
B
Bench/Chair Right Frame
Bench Back Frame
Bench Seat Frame
Bench Front Frame
Bench/Chair Left Frame
Chair Back Cushion
Chair Seat Cushion
Weight Capacity : 275 Lbs (single seat)
550 Lbs (towperson seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws

1 2
3-5
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
C
A
CB
CB
C
B
2
3
5
2
3
Step 1
Connect Bench Back Frame (3) & Chair Bench Frame (2) & tighten Bolt (A)
with Allen key (D)
Step 2
Connect part from Step 1 & Bench Seat Frame (5) tighten Bolt (B) with Allen
key (D)

3
4-5
4
C
A
C
A
C
AC
A
C
A
1
22
3
3
5
7
Step 3
Connect part from Step 2 & Bench Front Frame (7) tighten Bolt (A)
with Allen key (D)
Step 4
Connect part from Step 3 & Bench Left Frame (1) tighten Bolt (A)
with Allen key (D)

5 x2
5-5
6 x2
C
B
C
A
1
2
3
Step 5
Connect Bench Seat Frame (5), Bench Front Frame (7) & Bench
Left Frame (1) tighten Bolt (B), (A) with Allen key (D)
Step 6
Puton Bench Seat Cushion (13), Bench Back Cushion (12) to
complete Bench
5
7
12 12
13
13

Bench/Chair Right Frame
Chair Back Frame
Chair Seat Frame
Chair Front Frame
Bench/Chair Left Frame
Chair Back Cushion
Chair Seat Cushion
Pillow
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
QUANTITY
PIECE
2X
DESCRIPTION
Flat washer
Allen key
PICTURE
2X
2X
2X
2X
2X
2X
2X
24X
1X
1
2
4
6
8
17
18
19
C
D
1-4
Allen bolt(M6x30 mm) 12X
A
Allen bolt(M6x40 mm) 12X
B
Model# PAT7514 - 2/2
Product Dimensions:
32.28"x55.12"x33.46" H (Bench)
32.28"x29.92"x33.46" H (Chair)
27.95"x51.18"x16.54" H (Table)
Weight Capacity : 275 Lbs (single seat)
550 Lbs (towperson seat)
Warning : Do not stand on chair
Warning : Do not over torque bolts/screws

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
2-4
Bench/Chair Right Frame
Chair Back Frame
Chair Seat Frame
Chair Front Frame
Bench/Chair Left Frame
Chair Back Cushion
Chair Seat Cushion
Pillow
QUANTITY
PIECE
2X
DESCRIPTION
Flat washer
Allen key
PICTURE
2X
2X
2X
2X
2X
2X
2X
24X
1X
1
2
4
6
8
17
18
19
C
D
Allen bolt(M6x30 mm) 12X
A
Allen bolt(M6x40 mm) 12X
B
Weight Capacity : 275 Lbs (single seat)
550 Lbs (towperson seat)
Warning : Do not stand on chair
Warning : Do not over torque bolts/screws

1 x2 2 x2
3 x2 4 x2
Step 1
Connect Chair Back Frame (4) & Chair Right Frame (2) & tighten Bolt (A)
with Allen key (D)
Step 2
Connect part from Step 1 & Chair Seat Frame (6) tighten Bolt (B) with Allen
key (D)
Step 3
Connect part from Step 2 & Chair Front Frame (8) tighten Bolt (A) with Allen
key (D) 3-4
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
C
A
C
B
A
C
A
A
C
C
C
2
4
6
8
1
Step 4
Connect part from Step 3 & Chair Left Frame (1) tighten Bolt (A) with Allen
key (D)

5 x2
4-4
B
A
CC
6 x2
1
68
4
2
18
19
17
Step 5
Connect Chair Seat Frame (6), Chair Front Frame (8) & Chair Left
Frame (1) tighten Bolt (B), (A) with Allen key (D)
Step 6
Puton Chair Seat Cushion (18), Chair Back Cushion (17) &
Pillow (19) to complete Chair