Safavieh Outdoor PAT7521-1 User manual

Chair Seat Frame
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
QUANTITY
PIECE DESCRIPTION
Allen key
PICTURE
A
1-3
Socket Screws
6x0.5x15mm
Model# PAT7521 - 1/2
Product Dimensions:
23.62"x26.38"x29.13" H (Chair)
39.37"x25.59"x14.96" H (Table)
26.38"x26.38"x29.13" H (Corner)
HW2
Chair Seat CuhionC
Chair Back Cushion
D
Table Leg
E
Glass Table
F1X
1X
2X
2X
2X
2X
Weight Capacity : 275 Lbs (chair)
550 Lbs (bench)
Warning : Do not stand on chair
Warning : Do not over torque bolts/screws
BChair Leg - 1
HW1 12X
2X

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
2-3
Part List and Hardware List
QUANTITY
PIECE DESCRIPTION PICTURE
Chair Seat Frame
A
Chair Seat Cuhion
C
Chair Back Cushion
D2X
2X
2X
2X
Socket Screws
6x0.5x15mm
HW2
HW1 12X
BChair Leg - 1
Weight Capacity : 275 Lbs (chair)
550 Lbs (bench)
Warning : Do not stand on chair
Warning : Do not over torque bolts/screws
Allen key
2X

1 x2 2 x2
Step 2
Put on Chair Seat Cushion (C) & Chair Back Cushion (D) to complete Chair
3-3
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
HW1
C
D
HW2
B
A
Step 1
Attach Chair Leg - 1 (B) to Chair Seat Frame (A). Use Bolt (HW1) tighten
with Allen Key (HW2)

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
1-3
Model# PAT7521 - 2/2
Product Dimensions:
23.62"x26.38"x29.13" H (Chair)
39.37"x25.59"x14.96" H (Table)
26.38"x26.38"x29.13" H (Corner)
PIECE DESCRIPTION QUANTITY
Allen key
PICTURE
Socket Screws
6x0.5x15mm
HW2
BChair Leg - 1
H
I
JCorner Seat Cushion
K3X
3X
2X
GCorner Seat Frame 1X
Corner Right
Seat Frame
Corner Left
Seat Frame
Corner Back
Long Cushion
Corner Back
Short Cushion
1X
1X
L1X
MChair Leg - 2 1X
Weight Capacity : 275 Lbs (chair)
550 Lbs (bench)
Warning : Do not stand on corner
Warning : Do not over torque bolts/screws
HW1 18X
3X

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
2-3
Part List and Hardware List
QUANTITY
PIECE DESCRIPTION
Allen key
PICTURE
1X
Socket Screws
6x0.5x15mm
HW2
I
Corner Seat Cushion
J
K1X
1X
1X
Corner Left
Seat Frame
Corner Back
Long Cushion
1X
HW1 6X
BChair Leg - 1
Weight Capacity : 275 Lbs (chair)
550 Lbs (bench)
Warning : Do not stand on corner
Warning : Do not over torque bolts/screws

1 2
3-3
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
HW1
HW2
J
K
B
I
Step 1
Attach Chair Leg - 1 (B) to Corner Left Seat Frame (I). Use Bolt
(HW1) tighten with Allen Key (HW2)
Step 2
Put on Corner Seat Cushion (J) & Corner Back Long Cushion (K)
tocomplete Corner

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
1-3
Model# PAT7521 - 2/2
Product Dimensions:
23.62"x26.38"x29.13" H (Chair)
39.37"x25.59"x14.96" H (Table)
26.38"x26.38"x29.13" H (Corner)
PIECE DESCRIPTION QUANTITY
Allen key
PICTURE
Socket Screws
6x0.5x15mm
HW2
BChair Leg - 1
H
I
JCorner Seat Cushion
K3X
3X
2X
GCorner Seat Frame 1X
Corner Right
Seat Frame
Corner Left
Seat Frame
Corner Back
Long Cushion
Corner Back
Short Cushion
1X
1X
L1X
MChair Leg - 2 1X
Weight Capacity : 275 Lbs (chair)
550 Lbs (bench)
Warning : Do not stand on corner
Warning : Do not over torque bolts/screws
HW1 18X
3X

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
2-3
Part List and Hardware List
QUANTITY
PIECE DESCRIPTION
Allen key
PICTURE
1X
Socket Screws
6x0.5x15mm
HW2
H
Corner Seat Cushion
J
K1X
1X
1X
Corner Right
Seat Frame
Corner Back
Long Cushion
1X
HW1 6X
BChair Leg - 1
Weight Capacity : 275 Lbs (chair)
550 Lbs (bench)
Warning : Do not stand on corner
Warning : Do not over torque bolts/screws

1 2
Step 2
Put on Corner Seat Cushion (J) & Corner Back Long Cushion (K) to
complete Corner 3-3
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
HW1
HW2
J
K
B
H
Step 1
Attach Chair Leg - 1 (B) to Corner Right Seat Frame (H). Use Bolt
(HW1) tighten with Allen Key (HW2)

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
1-3
Model# PAT7521 - 2/2
Product Dimensions:
23.62"x26.38"x29.13" H (Chair)
39.37"x25.59"x14.96" H (Table)
26.38"x26.38"x29.13" H (Corner)
PIECE DESCRIPTION QUANTITY
Allen key
PICTURE
Socket Screws
6x0.5x15mm
HW2
BChair Leg - 1
H
I
JCorner Seat Cushion
K3X
3X
2X
GCorner Seat Frame 1X
Corner Right
Seat Frame
Corner Left
Seat Frame
Corner Back
Long Cushion
Corner Back
Short Cushion
1X
1X
L1X
MChair Leg - 2 1X
HW1 18X
Weight Capacity : 275 Lbs (chair)
550 Lbs (bench)
Warning : Do not stand on corner
Warning : Do not over torque bolts/screws
3X

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
2-3
Part List and Hardware List
QUANTITY
PIECE DESCRIPTION
Allen key
PICTURE
1X
Socket Screws
6x0.5x15mm
HW2
Corner Seat Cushion
J
K1X
1X
1X
Corner Back
Long Cushion
Corner Back
Short Cushion 1X
L
HW1 6X
MChair Leg - 2
GCorner Seat Frame 1X
Weight Capacity : 275 Lbs (chair)
550 Lbs (bench)
Warning : Do not stand on corner
Warning : Do not over torque bolts/screws

1 2
Step 2
Put on Corner Seat Cushion (J) & Corner Back Long Cushion (K), Corner
Back Short Cushion (L) to complete Corner 3-3
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
HW1
HW2
G
J
K
L
M
Step 1
Attach Chair Leg - 2 (M) to Corner Seat Frame (G). Use Bolt (HW1)
tighten with Allen Key (HW2)

Chair Seat Frame
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Part List and Hardware List
QUANTITY
PIECE DESCRIPTION
Allen key
PICTURE
A
1-3
Socket Screws
6x0.5x15mm
Model# PAT7521 - 1/2
Product Dimensions:
23.62"x26.38"x29.13" H (Chair)
39.37"x25.59"x14.96" H (Table)
26.38"x26.38"x29.13" H (Corner)
HW2
Chair Seat CuhionC
Chair Back Cushion
D
Table Leg
E
Glass Table
F1X
1X
2X
2X
2X
2X
HW1 12X
BChair Leg - 1
Weight Capacity : 275 Lbs (chair)
550 Lbs (bench)
Warning : Do not stand on table
Warning : Do not over torque bolts/screws
2X

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wicker furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
2-3
Part List and Hardware List
QUANTITY
PIECE DESCRIPTION PICTURE
Table Leg
E
Glass Table
F1X
1X
Weight Capacity : 275 Lbs (chair)
550 Lbs (bench)
Warning : Do not stand on table
Warning : Do not over torque bolts/screws

1
3-3
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
Step 1
Put on Glass Table (F) to complete Table
Caution: This table can only be used on a flat, level surface
F
E