Safavieh Outdoor PAT7006 User manual

Model# PAT7006
Product Dimensions:24.2" W x 24.8" D x 33.5"H
220
NOTICE
*Please make sure that you heve all parts indicited and they are in good cfore you
begin assembly of this item. Refer to part list and hardware list below for guidence.
*This itace to prevent scratching the finish during
assembly.
*This item may requirtenning.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail].
PREPARATION
* Before beginnning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*
*
*Tools Required for Assembly (included): Allen Key
WARNING
Part List and Hardware List
Allen key 4
Store outdoor furniture indoors or cover well when not in use. Dust regularly with small
brush or vacuum. Spills should be taken care of immediately before they harden or
stain with a slightly damped sponge.
CARE AND MAINTENANCE
A
B
C
Leg Frame
Back Frame
Seat frame
2X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY
D
HW1 Screw: M6 x0.5 x60 mm
Cross bar of leg 2X
8X
HW2Screw: M6 x0.5 x40 mm 2X
1X
HW3
CSH1 Seat cushion 1X

2
PREPARATION


 
 
 
1
Step 1
Use screws (HW1) to attach leg frames (A) to back frame (B), seat
frame (C) & cross bar of leg (D), tighten with allen key (HW3).
Step 2
Use screw (HW2) to connect seat frame (C) and back frame (B),
tighten(HW2) by allen key (HW3).
Complete.
D
C
A
A
B
HW1
HW1
HW1
HW1
HW1
HW1
HW1 HW1
D
HW2
B
C

PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not aempt to assemble the product.
* Ested Assembly Time : 10 minutes.
* Tools Requied for Assembly (included): Allen Key
* If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
3
Step 3
Put Seat Cushion (CSH1) on the Chair.
The Chair is ready to be used.
CSH1

Model# PAT7006
Product Dimensions:44.3" W x 24.8" D x 33.5"H
400
NOTICE
*Please make sure that you heve all parts indicited and they are in good cfore you
begin assembly of this item. Refer to part list and hardware list below for guidence.
*This itace to prevent scratching the finish during
assembly.
*This item may requirtenning.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail].
PREPARATION
* Before beginnning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
*
*
*Tools Required for Assembly (included): Allen Key
WARNING
Part List and Hardware List
Allen key 4
Store outdoor furniture indoors or cover well when not in use. Dust regularly with small
brush or vacuum. Spills should be taken care of immediately before they harden or
stain with a slightly damped sponge.
CARE AND MAINTENANCE
A
B
C
Leg Frame
Back Frame
Seat frame
2X
1X
1X
PIECE DESCRIPTION PICTURE QUANTITY
D
HW1 Screw: M6 x0.5 x60 mm
Cross bar of leg
1X
8X
HW2 Screw: M6 x0.5 x40 mm 3X
1X
HW3
CSH1 Seat cushion
2X

2
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not aempt to assemble the product.
* Ested Assembly Time : 10 minutes.
* Tools Requied for Assembly (included): Allen Key
* If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
1
Step 1
Use screws (HW1) to attach leg frames (A) to back frame (B), seat
frame (C) & cross bar of leg (D), tighten with allen key (HW3).
Step 2
Use screw (HW2) to connect seat frame (C) and back frame (B),
tighten(HW2) by allen key (HW3).
Complete.
D
A
A
C
B
HW1
HW1
HW1
HW1
HW1
HW1
D
C
B
HW2
HW2
HW2

PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not aempt to assemble the product.
* Ested Assembly Time : 10 minutes.
* Tools Requied for Assembly (included): Allen Key
* If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
3
Step 3
Put Seat Cushion (CSH1) on the Chair.
The Chair is ready to be used.
CSH1

Model# PAT7006
Product Dimensions:23.6" W x 40.9" D x 17.7" H
40
NOTICE
*Please make sure that you heve all parts indicited and they are in good cfore you
begin assembly of this item. Refef to part list and hardware list below for guidence.
*This itace to prevent scratching the finish during
assembly.
*This item may requirtenning.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [e-mail].
PREPARATION
WARNING
A
B
HW1
HW2
Top table
Frame cross bar
Allen key 4
1X
2X
8X
1X
PIECE DESCRIPTION PICTURE QUANTITY
Screw: M6 x0.5 x60 mm
* Before beginnning assembly of product, make sure all parts are present. Compare parts
with part contents list and hardware contents list.
*
*
*Tools Required for Assembly (included): Allen Key
table
Frame leg
1X
C
Part List and Hardware List
Store outdoor furniture indoors or cover well when not in use. Dust regularly with small
brush or vacuum. Spills should be taken care of immediately before they harden or
stain with a slightly damped sponge.
CARE AND MAINTENANCE

PREPPREPARAARATIONTION
1
**BeBefforore beginning assembly of pre beginning assembly of product, makoduct, make sure sure all parts are all parts are pre presenesent. Compart. Compare parts with packe parts with packagage ce cononttenents lists list and hart and hardwdwarare ce cononttenents lists list.t.
*If any part is missing or damaged, do not aempt to assemble the product.
* Ested Assembly Time : 10 minutes.
* Tools Requied for Assembly (included): Allen Key
* If you are having dificulty, our friendly Customer care team is always here to help. Please email [e-mail]
2
A
B
B
C
HW1
HW1
HW1
HW1
HW1
HW1
HW1
HW1
Step 1
Use screws (HW1) to connect leg frames (B) with top frame table (A)
and frame cross bar (C), tighten with allen key (HW2).
Step 2
Caution: This Table can only be used on a flat, level surface.