Safavieh Outdoor Denridge PAT6758 User manual

Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
NOTICE
Part List and Hardware List
Allen key
Bolts
06x25mm
Flat Washers
016x1.0mm
a
b
c
32X
2X
32X
1
6
7
8
10
2
3
4
5
2X
2X
1X
6X
6X
4X
1X
1X
9
11 2X
Table frame
Table legs
Rear legs
Front legs
Table glass
Bench frame
Chair frame
2X
2X
Pillow for chair
Pillow for bench
Cushion seat
for bench
Cushion seat
for chair
PIECE PICTURE DESCRIPTION QUANTITY
1
Warning: do not stand on chair / bench & table
Warning: do not over torque bolts/screws
MODEL# PAT6758
Product dimension:
Bench: 51.8W x 26.4D x 27.6H (Inches)
Chair: 25.2W x 26.4D x 27.6H (Inches)
Table: 41W x 21D x 14.5H (Inches)
Weight Capacity: 704 lbs per bench & 55 lbs per table

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included):Allen Key.
PREPARATION
3
12
11
2
Tighten 70% Tighten 100%
Step 2: Fully tighten using Key (c)Step1:Attach wood leg (1 & 2) to front and back of the chair
respectively, using a & b. Loosen the bolt to balance the chair first

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included):Allen Key.
PREPARATION
6
45
10
3
Tighten 70% Tighten 100%
Step 1: Attach wood leg (1 & 2) to front and back of the bench
respectively, using a & b. Loosen the bolt to balance the bench first
Step 2: Fully tighten using Key (c)

Step 2: Fully tighten using Key (c) after that put
the glass on top table
8
7
9
5
6
7
89 6
7
4
Step 1: Attach wood leg (3) to frame, using a & b. Loosen the bolt
to balance the table first
Step 3: Put all cushions on the chairs and bench