Safavieh Outdoor Thessaly PAT5003C User manual

CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents. Sharp objects will damage and scratch
the surface. Wipe the surface with a soft, damp cloth
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Model#PAT5003A-CHAIR
Part List and Hardware List
Product Dimensions:30.25"W x18.5 " D x37.75" H
PIECE DESCRIPTION PICTURE QUANTITY
A BACKREST 1x
B ARMREST LEFT 1x
C ARMREST RIGHT 1x
D SEAT PART 1x
E LEFT LEG 1x
F RIGHT LEG 1x
G BOTTOM BAR 1x
H NUTS 11x
I SPANNER 1x

PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included):SPANNER.
Nuts has been kept on product itself, two spare nuts can found in hardware bag
Please do not fully tighten bolts/nuts until the end of step.
Periodically check all bolted connections to make sure they are tight and secure.
step1 step2
Attach the left leg (E) and right leg (F) to the
seat part (D) using the nuts and spanner
provided.
Connect the bottom bar (G) to the left lgeg (E) and right
leg (F),using nuts and spanner provided.
step3 step4
Insert backrest (A) into seat part (D), fasten
the nuts with spanner provided.
Install the left armrest (B) and right armrest (C), using
the nuts and spanner provided.

CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents. Sharp objects will damage and scratch
the surface. Wipe the surface with a soft, damp cloth.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Model#PAT5003A-TABLE
Part List and Hardware List
Product Dimensions:39.25"W x 39.25" D x 28.75" H
PIECE DESCRIPTION PICTURE QUANTITY
A TABLE TOP 1x
B BOTTOM FRAME 1x
C FASTENING NUT 4x
D SPANNER 1x

PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): SPANNER
Nuts has been kept on product itself, two spare nuts can found in hardware bag.
Please do not fully tighten bolts/nuts until the end of step.
Periodically check all bolted connections to make sure they are tight and secure.
Step 1
Attach the table top (A) to the bottom frame(B) using the nuts
provided