Safavieh Outdoor PAT7727 User manual

NOTICE
Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
This item may require periodic tightening.
lf you are having difficulty, our friendly Customer Care team is always here to help. Please
email
[email protected]
*
*
*
*
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
*
*
*
*
CARE AND MAINTENANCE
Weight Capacity : 352 lbs ( Chair)
Warning : Do not stand on
Table
/Chair
Warning : Do not over torque bolts/screws
A1X
C
D
Part List and Hardware List
Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from
standing water. Dust regularly with small brush or vacuum. Spills should be taken care of
immediately before they harden or stain with a slightly dampened sponge. Do not use bleach
solutions
Model# PAT7727
Product Dimensions
25.98"W x 37.01"D x 29.13"H (Chair)
1-3
B
Left Leg Chair
Seat Chair
Back Chair
Seat Cushion
Right Leg Chair
Back Cushion
Allen Bolt: M6x0.5x60 mm
Allen Bolt: M6x0.5x25 mm
HW1
HW2
CSH2
CSH1
Flat Washer M6x1 mm
DESCRIPTIONPIECE PICTURE QUANTITY
ESupport Chair
HW3
Split Lock Washer 6 mm
HW4
HW5 Allen Key
1X
1X
1X
1X
1X
1X
2X
6X
6X
2X
1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
lf you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
*
*
*
*
*
2-3
50%50%
HW5
X2 Bolt
HW5
50%
HW5
X3 Bolt
100%
HW5
D
B
HW2
HW3
STEP 1: Connect Right Leg Chair (B) & Seat Chair (D) by tightening Allen
Bolt (HW2) and Flat Washer (HW3) with Allen Key (HW5).
C
HW2
HW3
HW1
HW4
STEP 2: Connect the part from Step 1 with Back Chair Frame (C) by tightening Allen
Bolt (HW1),(HW2) and Flat Washer (HW3),(HW4) with Allen Key (HW5).
E
STEP 3: Connect the part from Step 2 with Support Chair (E) by Hand.
AHW2 HW1
HW1
HW4
STEP 4: Connect the part from Step 3 with Left Leg Chair (A) by tightening Allen Bolt
(HW1),(HW2) and Flat Washer (HW3),(HW4) with Allen Key (HW5).
X3 Bolt

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
lf you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
*
*
*
*
*
3-3
100%
HW5
STEP 5: Place Seat Cushion (CSH2) & Back Cushion (CSH1) to Finish Chair.
CSH2
CSH1
STEP 6: Tie Cushion to Finished Chair.
STEP 7: Finish.