Safavieh Outdoor Edna PAT7719 User manual

Model# PAT7719
Product Dimension:
17.72"x17.72"x17.72"H (Table)
36.22"x34.25"x33.46"H (Chair)
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* This item may require periodic tightening
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
Weight Capacity : 275 Ibs (single seat)
550 Ibs (two person seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws
PIECE DESCRIPTION PICTURE QUANTITY
2X
Part List and Hardware List
1
2
3
4
5
6
7
8
A
B
C
D
F
Back Bench Frame
Seat Bench Frame
Right Frame
Left Frame
Table Frame
Leg Frame
Side FrameTable
Seat Cushion
Allen Bolt M6x40
Allen Bolt M6x25
Allen Bolt M6x20
Flat Washer M8*18*T1
Allen Key
2X
2X
2X
1X
2X
2X
2X
4X
4X
20X
28X
1X
1-4
EWasher M8*18*T5 4X

Right Frame (2 Pcs) Left Frame (2 Pcs)
Seat Bench Frame (2 Pcs)
Back Bench Frame (2 Pcs)
Table Frame (1 Pc) Leg Frame (2 Pcs) Side FrameTable (2 Pcs) Seat Cushion (2 Pcs)
(04 Pcs)
Allen Bolt M6x40 Allen Bolt M6x25
Allen Bolt M6x20
(04 Pcs)
(20 Pcs)
1 2 34
5 6 78
A B CE
F
Flat Washer M8*18*1
(28 Pcs) Allen Key (1Pc)
2-4
D
Washer M8*18*5 (04 Pcs)

1
2
AA
3
C
C
C
F
STEP 1: Connect Seat Bench Frame (2) & Back Bench Frame
(1), tighten Allen Bolt (A),Flat Washer (E) with Allen Key (F).
STEP 2: Connect the part from Step 1 & Right Frame (3),
tighten Allen Bolt (C),Flat Washer (E) with Allen Key (F).
F
4
STEP 3: Connect the part from Step 2 & Left Frame (4), tighten
Allen Bolt (C),Flat Washer (E) with Allen Key (F).
STEP 4: Locate Cushion with Nut to finish.
C
C
C
X2 X2
X2 X2
8
F
3-4

F
F
4-4
STEP 7: Connect the part from Step 6 & Side FrameTable (7),
tighten Allen Bolt (C), Flat Washer (D), Washer (E) with Allen
Key (F).
STEP 6: Connect Table Frame (5) & Leg Frame (6),
tighten Allen Bolt (B),Flat Washer (E) with Allen Key (F).
5
6
6
B
B
B
B
STEP 8: Finish.
STEP 5: Finish.
X2
C
C
7
7
C
D
E
C
C