Safavieh Outdoor Ralden PAT7070 User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
A
B
C
D
E
Front Brace Bar & Back Brace Bar
Seat Frame
Front Leg
Screw
Allen key
1X
2X
2X
2X
PIECE DESCRIPTION PICTURE QUANTITY
Model# PAT7070
Product Dimensions:25.3" W x 81" D x 39.2" H
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
LG4
F
G
H
I
Back Leg
Washer
M6x50
4X
2X
2X
2X
2X
sun lounger
Corner Block
1X
M6x20
Screw
Washer 6.5 x 20 x 2 mm
25 x 35 x 5 mm
Wheel Bar
Driven Wheel
8X
14X
J
K
L

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
12
Step 1
Insert Front Leg (B) to Front Brace Bar (C) by using Screw (I),tighten
with allen key (L). Then attach to the Seat Frame (A) by using Screw
(H) tighten with allen key (L).
Step 2
Attach the Corner Block (E) to Front Leg (B), Back Leg (D) and
Seat Frame (A) by using Screw (I) tighten with allen key (L).
H,I
L
H,I
L

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
34
Step 3
Attach Wheel Bar (G) poke through to the Back Leg (D) use
Washer (K) to attach to both ends of Wheel Bar (G), then attach
the Driven Wheels (F) to the Wheel Bar (G) by using Screw (I) and
Washer (J). Tighten with allen key (L).
I
L
Step 4
Caution: This Chair can only be used on a flat, level surface