Safavieh COF6401 User manual

* Do not tighten bolts until completely assembled.
CARE AND MAINTENCE
Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild
cleaner. Test the cleaning method on a hidden area before using them over the
entire area.
NOTICE
* This item may require periodic tightening.
Part List and Hardware List
1 X
2 X
A
B
D
TABLE TOP
ALLEN KEY 4mm
ALLEN BOLT 1/4* 1''
H4
2 X
1 X
LEFT LEG
Piece Description Picture Quantity
* This item should be assembled on a soft surface to prevent scratching the
finished product during assembly.
* Please make sure that you have all parts indicated before you begin assembly
of this item.
1 X
C
METAL SHELF
Weight Capacity : 25 lbs
Warning : Do not stand on table
Warning : Do not over torque bolts
H1
H2
H3 SCREW 8mm* 1-5/8''
8 X
4 X
4 X
CONNECTING BAR
ALLEN BOLT 5/16* 2''
Product Dimensions: 47"W*23-1/2"D*18"H
Model# COF6401
E
RIGHT LEG 2 X
WARNING

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:15 minutes.
Tools Required for Assembly : Allen Key (included) and Philips head screwdriver (not included).
Step 1:
Attach connecting bar (E) to 1*left leg (B ) and 1*right leg (C) **The side with a
screw hole is facing inward**. Repeat this process to attach the other side leg.
Put the assembled legs to the apron on underneath of table top (A) by using
Allen key (H4) to lock with 8*Allen bolts (H1), then use the Philips head
screwdriver (not included) to lock with 4*screws (H3) into connecting bar, as
picture.
1
Step 2:
Attach the metal shelf (D) to the assembled connecting bars by using the Allen
key (H4) to lock with 4*Allen bolts (H2), as picture.
Straighten up the assembled product, Assembly is completed.
2
H3
A
B
C
B
C
E
E
H1 H4
H4
H2
D
H4
H1
H3 H4
H2
Philips head screwdriver