Safavieh PAT6710 User manual

Part List and Hardware List
MODEL# PAT6710
Product Dimension: 48.43”W x 24.8”D x 31.89”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
PIECE DESCRIPTION PICTURE QUANTITY
Back
Seat
Left side
Right side
Support L
Support S
Allen Bolt
Screw
Bolt extra
Allen Key
1x
1x
1x
1x
1x
1x
1x
1x
2x
6x
NOTICE
M6x50
M6x70
M4x35
Warning : Do not torque bolts / screws
Warning : Do not stand on the bench
Weight capacity : 600 lbs.

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key.
PREPARATION
12
Step 1: attach right side (D) to the back (A). Then attach
support L (E) and support S (F) to the right side (D) as shown on
the picture by using the Allen Bolt (H1) and tighten all with the Allen
Key (H4). Continue with the left side (C) in the same way.
Make sure to tighten all bolts (H1) before you continue with step 2.
Step 2: put the seat (B) inside the bench as shown on the picture
and use the screws (H2) to attach it to the chair by using a screwdriver.

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key.
Step 1: attach right side (D) to the back (A). Then attach
support L (E) and support S (F) to the right side (D) as shown
on the picture by using the Allen Bolt (H1) and tighten with the
Allen Key (H4). Continue with the left side (C) in the same way.
Make sure to tighten all bolts (H1) before you continue with step 2.
1
PREPARATION
Step 2: put the seat (B) inside the chair as shown on the picture
and use the screws (H2) to attach it to the chair by using
a screwdriver .
2
B

MODEL# PAT6710
Product Dimension: 25.59”W x 24.8”D x 31.89”H
NOTICE
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
Back
Seat
Left side
Right side
Support L
Support S
Allen Bolt
Screw
Bolt extra
Allen Key
6
M6x50
M4x35
M6x70
Warning : Do not torque bolts / screws
Warning : Do not stand on the chair
Weight capacity : 300 lbs

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Wrench.
PREPARATION
12
Step 1: turn the table top and put the 4 legs (B)
on the table top (A).
Step 2 : tighten all bolts to the support of the table
top by using the wrench(C).
C

Part List and Hardware List
MODEL# PAT6710
Product Dimension: 39.37”W x 23.62”D x 14.17”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
PIECE DESCRIPTION PICTURE QUANTITY
Table top
Leg
Wrench
NOTICE
Warning : Do not torque bolts / screws
Warning : Do not stand on the table
Weight capacity : 40 lbs.