Safavieh PAT6752 User manual

MODEL PAT# 6752
Product Dimension: 33.07”W x 19.69”D x 31.5”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
NOTICE
Warning : Do not torque bolts / screws
Warning : Do not stand on the bench
Weight capacity : 600 lbs
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
F2
Front bar
1x
2x
2x
Joint bar 2x
1x
Support bar
Back
Side
Seat
A
B
C
D
E
Wrench
Allen Key
1x
1x
16x
Allen bolt 2x
M6x50
Allen screw M6x60
G1
G2
G3
G4
1x
F1
Lock bar
1x

G2
G3
Step 1 : attach the seat (B) to the side (C),joint
bar (D), front bar (F1) as shown on the picture.
these parts.
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and wrench.
PREPARATION
2
1
Step 2 : attach seat part to the back (A) as
shown on the picture. Then use the Allen screw
(G2) to tighten to side of the back (A) as shown
on the picture.
Step 3: repeat other seat part other side as
shown on the picture with same step 1 and step 2.
Then use the Allen screw (G2) to tighten together
G2
G2
G2
G2
G2
G2
A
G2
G2
G2
G2
G2
F1
F1
F2
F2
shown on the picture with same step 1 and step 2.
Make sure use the lock bar (F2) for step 3.
D
G2
G2
C
B
F1
F1
G2
G2
G2
G2
G3
G3

Step 4: attached the support bar (D) to the back (A) as shown on the picture.
Then use the Allen bolt (G1) to tighten the support bar (D) to the back by using
the Allen key (G3) and wrench (G4).
5
4
Step5 : when folding seat of bench together (Pic 1) turn on the bolt (X)
under seat for locking as shown on the picture . When lifting the back
(Pic 2 ), put the support into the bracket (Z) as shown the picture to
keep this part from dropping , lift up. After that, turn the small wooden
block(Y) to keep the back of bench from falling down.
A
D
D
G4
G3
Pic 1
Pic 2
Pic 3
Y
x
Z
Y
A
G1
G1
G1
F2
F1
F2
F1
F2
F1