Safe 4SF-4000C User manual

Car lift installation, operation and maintenance manual Type：4SF-4000C
1
Type：4SF-4000C
●Four post car parking life
●Manual lock release
●Lifting capacity：4000Kg
INSTALLATION,OPERATION AND MAINTENANCE MANUAL
The instructions is part of the product. Please keep them where you can easily find them as reference.
Read the instructions carefully before starting installation, operation and maintenance.
The manufacturer and its distributor are not liable for any accidents caused by customer’s arbitrary modification of
the part or operation.

Car lift installation, operation and maintenance manual Type：4SF-4000C
2
INDEX
1.SAFETY INSTRUCTIONS..................................................................................................................................................
1.1 Statement
1.2 Qualified operator and instructions for use
1.3 Notes
1.4 Warning Signs
1.5 Noise standard
2.INTRODUCTION.................................................................................................................................................
2.1 Product description
2.2Technical parameter
2.3Main structure of the machine
3.INSTALLATION.................................................................................................................................................
3.1 Before installation
3.1.1 Tools and equipments needed
3.1.2 Ground requirement
3.1.3 Check accessories
3.2 Precautions during installation
3.3 Installation steps
3.4 Notes after installation
4.OPERATION.................................................................................................................................................
4.1 Operating instructions
4.2 Operation flow chart
4.3 Instructions for use
5.TROUBLE SHOOTING................................................................................................................................
6.MAINTENANCE............................................................................................................................................
7.ENCLOSURE.............................................................................................................................................................
Enclosure 1 Packing list
Enclosure 2 Overall diagram
Enclosure 3 Space required
Enclosure 4 Hydraulic diagram
Enclosure 5 Wiring diagram
Enclosure 6 Explosion diagram

Car lift installation, operation and maintenance manual Type：4SF-4000C
3
SAFETY INSTRUCTIONS
1.1 Statement
●We will give the user one-year warranty of quality for the machine. If something wrong with the machine within the term of service, we will
repair or replace the product according to the user’s demand. The manufacturer will not take any responsibility for improper installation and
operation, overload running, wrong concrete ground (that can not meet the requirements in the manual), normal mechanical abrasion and
insufficient maintenance.
●The lifting machine is designed for lifting vehicles and does not allow any other use. Neither the dealers nor we are liable for the accidents and
damage caused by the machines for other purposes..
●Be sure to pay attention to the tonnage mark on the machine and shall not attempt to lift the vehicle beyond the rated lifting weight.
●Please read the manual carefully before installation and operation of the lifting machine so as to avoid any loss of property or even personal
injury caused by improper operation.
●In the absence of the manufacturer's permission, no user may alter the control and other mechanical parts of the machine without permission.
1.2 Qualified operator and instructions for use
1.2.1 Professional trained personnel can operate the lift.
1.2.2 Electrical connections must be operated by personnel with electrical qualifications.
1.2.3 Laypeople shall not use lifting machines.
1.3 Notes
1.3.1 Do not install the lift on asphalt. The thickness of the concrete must meet the requirements.
1.3.2 Before you operate the lift, read and understand the instructions for safety operation carefully.
1.3.3 Customers do not have special needs customized, lifts are generally not used outdoors.
1.3.4 Hands and feet away from the lift’s moving parts, when the machine falling, remove the hands and feet, to avoid being hurt.
1.3.5 Professional trained personnel can operate the lift.
1.3.6 The operator is not allowed to wear fat clothing so as not to be caught in the moving parts during the lifting of the machine.
1.3.7 The lifting machine must be kept clean and tidy and should not be piled up so as not to cause accidents.
1.3.8 The lifter is designed to lift the vehicle as a whole rather than a part; do not attempt to lift more than the rated lifting weight of the vehicle.
1.3.9 Work under the car, make sure the safety of the lift in occlusal state.
1.3.10 Lift the lifting pad must be placed in the vehicle manufacturers recommended position, and then slowly lift the vehicle, to determine the
smooth, no tilt, tipping, fall off in order to lift to the desired height.
1.3.11 Check the parts for damage at any time, check the synchronism of the machine and the flexibility of the moving parts, and pay attention to
the regular maintenance. Once the abnormal situation is found, stop using and contact the dealer immediately.
1.3.12 Please lowest the machine after operation.
1.3.13 The components of the lift shall not be altered without the manufacturer's permission.
1.3.14 If the machine is not used for a long time, the user needs

Car lift installation, operation and maintenance manual Type：4SF-4000C
4
A.Cut-off power B.Emptying hydraulic fluid C.The moving parts are lubricated with hydraulic oil.
Attention：
The parking car lift belongs to high-risk products, installation or improper operation, or modify the mechanical
components, are likely to cause injury or death of the operator, read the instructions carefully and strictly in
accordance with the requirements of work, and do not randomly discharge liquid, protect the surrounding
environment。
1.4 WARNING SIGNS
All safety warning signs presented on the machine with the purpose to draw the operator’s attention from dangerous or unsafe situations. The
labels must be kept clean and they have to be replaced if detached or damaged. Read the meaning of the labels carefully and memorize it.
1.5 Noise standard
Lifting machine noise should be less than 75dB, for your health sake, it is recommended to put a noise meter in your work area, observe the noise
of the lifting machine at any time.

Car lift installation, operation and maintenance manual Type：4SF-4000C
5
INTRODUCTION
2.1 Product description：
A：Four parking lift is composed of a main side column, beam, bridge, bridge, safety mechanism, hydraulic cylinder, power unit, control box
(optional) and other major components.
B：The power unit is switched on, the gear pump operation, promote the hydraulic oil cylinder piston rod, wire rope driven mobile cylinder
movement process, because the steel wire rope traction between bridge decks and beams, so as to realize the lift up and down movement, and then
achieve the purpose of lifting.
C：The insurance agency safety lock block in each process will automatically rise and bite the column within the rack together, make sure not
because the hydraulic system failure caused by falling.
Security structure diagram：
2.2Technical parameter
Type
Lifting capacity
Rise / fall time
Lifting Height
Total height
Total width
Width between
4SF-4000C
4000kg
《60s
1880mm
2190mm
2928mm
5400mm
2.3Main structure of the machine
Insuranc
e strip
Steal cable
broken
insurance
beam
Colum
Main
insurance
Cable break safety spring

Car lift installation, operation and maintenance manual Type：4SF-4000C
6
INSTALLATION
3.1Before installation
3.1.1 Tools and equipments needed
1.Lifting equipment 1 piece, 2.Antiwear hydraulic oil 10L,3.Electric drill,4.chalk,5.Tape,6.Magnet sag,7. Ф15mm horizontal pipe 8 m ,8.Open
spanner 1 set,9.Inner hexagon spanner 1 set
10.A cross screwdriver ,11.An one word screwdriver,12.A needle nose pliers, 13. Ф17,Ф19,Ф22 Socket wrench each 1,14,Hammer 1 pieces (4
pounds),15.Circlip pliers 1 piece
3.1.2 Ground requirement
The car lift must be installed on the concrete ground level strong, concrete strength is more than 3000psi, the error is less than 5mm, the
minimum thickness of not less than 300mm. in the new pouring concrete need maintenance 20 days above.
3.1.3 Check accessories
Open the package and check for missing parts in accordance with attachment 1 (complete machine packing list). Once found, contact the
distributor or the manufacturer immediately. If leakage is found, installation is still performed,SAFE and distribute shall not be held responsible
and shall not be settled free of charge.
Secondary column
beam
Control box
optional
Power unit
Main column
Oil drop pan
Tool tray
Main bridge
Sub slab bridge
Beam
Secondary column
Secondary column
approach

Car lift installation, operation and maintenance manual Type：4SF-4000C
7
Packing dimension drawing
3.2 Precautions during installation
▲During installation, please observe that the two upright columns are parallel and vertical to the ground, and shall not be tilted.
▲hydraulic hose and steel cable connection, the joint must be connected in place, so as to avoid oil leakage and steel cable loose.
▲All bolts and nuts must be tightened to ensure fastening.
▲No vehicles shall be placed during the test.
3.3 Installation steps
Step 1：Choose the suitable place：
The lift is for indoor use only. It is installed on strong concrete, not installed on the expansion joint of the cement ground, and shall not be installed
on the ground floor of the two or high floor without the permission of the relevant building personnel.
Step 2：Determine the installation position and lift the hoist to the installation site with a crane.
Step 3：Disassembly package
<1>： The pre placed wood on the ground (wood thickness greater than 100mm), crane for packaging side below the bridge plate is placed on wood,
the purpose is to let off the ground at the bottom of the packing frame.
<2>: Remove the packing：
<3>：Remove the connecting screws between the main bridge board and the packing rack. Hang the main bridge board with the crane and put it in
the free space.

Car lift installation, operation and maintenance manual Type：4SF-4000C
8
Main bridge plate 1 pieces
<4>:Remove the packing bags, take A:2 approach spans, B:3 tubing, C:1 tool plates, D:1 power units, E:1 parts cases, and put them in the free
space.
Approach spans 2 pieces Oil drop pan 3 pieces
Tool tray 1 piece
<5>:Remove the belt and remove the screws from the main and secondary posts and the packing frame. Take the main and the auxiliary Posts off
and put them in the free space

Car lift installation, operation and maintenance manual Type：4SF-4000C
9
Main column 1 pieces (with motor board) Secondary column 2 pieces Secondary column A 1 pieces
<6>:Take out: A: beam 2, B: insurance mechanism is connected with the 1 sets of C components before and after blocking 4, D: 4 E: dashboard
baffle, baffle tire 4, F mobile component 4, put it in a free place
Beam 2 pieces Before and after blocking 4 pieces
Dashboard 4 pieces Block the tyre bracket 4 pieces
Moving components 4 pieces
<7>.The demolition of the bridge plate and side packing frame screws, remove the packing frame, crane for bridge side away, moved to the vacant

Car lift installation, operation and maintenance manual Type：4SF-4000C
10
places.
Step 4：Install column and beam：
<1>:Remove main and auxiliary column roof and insurance bar as follows：
1.Column safety strip，2.M20 custom nut，3.Column roof，4.M20 flat pad，5.M20 nut，6.M12 nut，7.M12 spring washer，8.M12 flat pad，
9.M12*30 six point screw，10.column
<2>: Mark the standing points of the four posts with tape measure and chalk, make sure the two diagonals are the same length.
Second column
Main column

Car lift installation, operation and maintenance manual Type：4SF-4000C
11
<3>Position the column with the retaining tire support and place the column upright on the ground, as shown below.
<4>:Load the cross member in the column, as shown in the following figure. （Notice: when installing the crossbeam, pay attention to the direction
of the cross member）
Tyre retaining bracket
Tyre retaining bracket
Tyre retaining bracket
Tyre retaining bracket
Second column
Second column
Second column
Main column
Tyre retaining bracket
Tyre retaining bracket
Tyre retaining bracket
Tyre retaining bracket
Push the beam into the column
Push the beam into the column
Second column
Second column
Beam
Beam
Second column
Main column

Car lift installation, operation and maintenance manual Type：4SF-4000C
12
<5>:Install the roof of the column, as shown in the following figure：
1.Column ，2. M12*30 six angle screw, 3. M12 flat pad, 4. M12 cushion, 5. M12 nut, 6. top plate
<6>:Erect the upright post, as shown in the following figure.
（Note: the column erected after need to measure the relative position of four column, provide accurate size for subsequent installation of bridge）
Attention: according to the chart, pay attention to the direction of the main and auxilia ry column roof

Car lift installation, operation and maintenance manual Type：4SF-4000C
13
Step 5:install the control box, as shown in the following picture. (optional)
Step 6 ：Install the upper limit switch, as shown in the following figure. (optional)
Second column
Second column
Second column
Second column
beam
beam
Main column
Control box
M5*12 cross head screw
M4 Nut
M4 Spring washer
M4 Flat pad
Travel switch
M4*16 cross head screw
Connect to control box

Car lift installation, operation and maintenance manual Type：4SF-4000C
14
Step 7：Install the two drop switch, as shown in the following figure. (optional)
Step 8：Install the insurance bar as shown in the following picture.
Note: if the customer requirements: A: control box, B: limit switches, C: two decreased, then the eighth step is necessary after the 5,6,7 step, not in
the 5,6,7 step before, or "two down" wire to install "control box" cannot be installed.
Step 9：Installation of the main and the second deck side and dashboard bezel.
Lock the beam in the third lock, and then the main and auxiliary table with a crane on the beam, with the M18*110 six angle screw, spring washer,
flat washer, nut "dashboard bezel",The beam and the main and auxiliary table are as follows：
1.main column, 2. second column, 3. main board, 4. board, 5. beams, 6. dashboard bezel, 7.M18 nut, 8.M18 cushion, 9.M18 flat pad, 10.M18*110
Connect to control box
Main column
M5*12 cross head screw
Limit switch fixing plate
Limit switch
M5*12 cross head screw
M20 Nut
M20 Flat pad
Roof
Insurance strip
The safety block is inserted into the crossbeam slider
Beam slider
Beam

Car lift installation, operation and maintenance manual Type：4SF-4000C
15
six screw angle
Step 10：Install the steel cable
Note: in the installation of steel cable, first of all, "wire rope off device", "beam shell" removed, or else the wire rope can not be installed, as shown
below:
Note: when the steel cable is installed, the "wire rope removing device" and "cross beam housing" shall be installed.
Main column
Main bridge
Steel cable
M8 Flat pad
M8 Flat pad
M8 Nut
Beam
Steel cable anti stripping device
M8*35 six angle screw

Car lift installation, operation and maintenance manual Type：4SF-4000C
16
1.M20 nut, 2.M20 flat pad, 3. main, diagonal column roof, 4. pairs, diagonal column roof, 5. main safety plate, 6. main, diagonal column, rope
breakage insurance，
7. second, diagonal column, rope break insurance, 8. rope pulley, 9.M8 flat pad, 10.M8 elastic pad, 11.M8 lock nut, 12.M24*2 lock nut, 13. Steel
cable holder, block 14. Steel cable holder, 15. limit cushion, 16. rope rope pulley, 17. rope break safety shaft, 18. steel wire rope 2660, 19. steel
wire 4090, 20. steel wire 6730 21. Steel cable 8150, 22. oilless bearings 2519
Step 11：Installation of insurance institutions

Car lift installation, operation and maintenance manual Type：4SF-4000C
17
Optional
Optional
Control box
Control box
1. main insurance, 2. main insurance connection rod, 3. Vientiane earring, 4.M8 lock nut, 5. long pull rod, 6. short pull rod, 7. main safety handle,
8.M12 nut, 9. connecting rod, screw rod 10.M8 nut,.11.M8 flat pad, 12.M8*40 six angle screw, 13. long rod fixing ring, 14. main and secondary
safety handle connecting rod, 15. auxiliary safety pull rod, 16. handle isolating sleeve, 17. plastic bowls
Step 12：Installation of oil pipe joints
Step 13：Install the crossbeam two times down baffle, as shown below: (optional)
Optional
Three way ball valve joint
Main pipe 1900
Control box
Optional
Power unit
Two drops
Main column
M14 combination washer
Main pipe 1800
Bridge plate joint
Four column garage cylinder
Cylinder joint

Car lift installation, operation and maintenance manual Type：4SF-4000C
18
Step 14：Installing the before and after dashboard and approach: as shown below：
Step 15：Fill up with hydraulic fluid
Note: when the actual temperature is above 18 degrees, it is recommended to use No. 46 anti-wear hydraulic fluid. When the temperature is lower
than 18 degrees, 32 anti-wear hydraulic oil is recommended. The viscosity of the hydraulic oil largely determines the lifting speed of the lifter.
The tank has a capacity of 10L, usually only a capacity of 80%.
Limit switch
Two time baffle
M8*16 six angle screw
Limit switch fixing plate
Second column
Main plate
Approach
Beam assembly
Main column
M8 flat pad
M8 cushion
Main column
Before and after blocking
Main plate
Approach
Before and after blocking

Car lift installation, operation and maintenance manual Type：4SF-4000C
19
Step 16：Connect the power supply, test run；
1.Connect the power source according to the power instructions on the machine nameplate.
2.Check the mechanical latch state insurance.
3.No vehicles shall be placed during the trial run.
4.Make sure all the connections are in good condition
Step 17：Adjust the level of the lifting machine at four points
Please do not place any vehicle in adjustment time
A：Leveling of the whole machine
Open the power switch on the control box, release the emergency stop switch, press the up button, such as wire rope tension after all,
measure the 2 end of the beam to the main side column base plate distance is equal, if not equal, adjust the top of the column nut until the wire
rope 2 beam four end end plate distance line.
B：Leveling of insurance
Hold the unloading handle of the power unit, lift down, until the fall to insurance work state, the wire rope is slack at the moment,
measuring the 2 end of the beam to the main side column base plate distance is equal, if not equal, adjust the top of the column insurance nut until
the 2 beam four end the bottom plate distance line.
Power cord
Ground wire
Ground wire
Motor line
Upper limit line
Two fall limit line

Car lift installation, operation and maintenance manual Type：4SF-4000C
20
Step18 ：Method for fixing four column parking garage
Installation of expansion bolts in accordance with the foundation diagram, before installation, you need to determine the relative position
of the four pillars, the error must not exceed 5mm, and draw the outline of the motherboard with chalk, the specific steps are as follows：
1. Use electric hammer drill to swell the bolt mounting hole，energize vertically，do not allow the drill to tilt.
2. Drill through the hole and sweep away the dust，Make sure that the bottom plate is aligned with the line to be drawn during drilling.
3. If the plate requires gaskets to ensure the level, plug the appropriate quantity of the gasket so that the expansion bolt is tightened and the
column and the ground are vertical. Plug in the gasket and start tightening the expansion bolts.
4. Follow the chalk line to position the main column.Install the secondary column in accordance with steps 1,2,3.
Drill hole Dust removal knock expansion pin Wrench tightening
Step 19：Use of mobile kits，
Insurance is highly inconsistent
The height of the machine is inconsistent
IAdjust the line nut
IAdjust the steel cable nut