Sagem 1201 User manual

SAGEM F@stTM 1201/1241 V2
Quick Installation Guide
253156400-A_GIR 1201 V2 STD-gb.i1 1 14/10/2008 16:59:35

Contents
1 CONTENTS OF THE PACK.................................................2
2 CONNECTING YOUR MODEM ...........................................3
2.1 CONNECTING YOUR ROUTER..............................................................3
2.2 CONNECTING ADDITIONAL TELEPHONES.......................................... 3
3 INSTALLATION FROM THE CD-ROM ................................4
3.1 INSTALLATION ON THE ETHERNET PORT...........................................6
3.2 INSTALLATION ON THE USB PORT.......................................................7
3.3 REINSTALLING OR UNINSTALLING YOUR MODEM ............................ 8
4 TROUBLESHOOTING.........................................................9
4.1 STATUS OF THE LEDS ON THE FRONT ............................................... 9
4.2 MODEM SUPERVISION ........................................................................10
4.3 «DIAGNOSTICS» TOOL........................................................................11
5 SAFETY INSTRUCTIONS .................................................13
5 SAFETY INSTRUCTIONS (CONTD.) ................................14
253156400-A_GIR 1201 V2 STD-gb.i2 2 14/10/2008 16:59:35

SAGEM F@st™ 1201/1241 V2
1
Sagem Ciomlmunications thanks you for choosing the range of SAGEM F@stTM
1201/1241 V2 modems while hoping that it will provide you with full satisfaction.
SAGEM F@stTM 1201 V2 and SAGEM F@stTM 1241 V2 products adapt the ADSL func-
tion respectively on POTS (ITU G.992.1/3/5 - Appendix A) and on ISDN (ITU G.992.1/3/5
- Appendix B).
SAGEM F@stTM 1201 V2 and SAGEM F@stTM 1241 V2 equipment include an Ethernet
interface (ETH) and an USB interface.
SAGEM F@stTM 1201 V2 and SAGEM F@stTM 1241 V2 products can be provided in
«Bridged» or «Routed» version according to the ISP.
In addition, this modem will provide you with access to all the services provided by your
ISP (Internet Service Provider), as shown in the diagram below.
List of symbols used in this guide
Warns you about an action or a serious omission.
Provides you with important information you must take into account.
Presentation
253156400-A_GIR 1201 V2 STD-gb.i3 3 14/10/2008 16:59:45

SAGEM F@st™ 1201/1241 V2
2
1 CONTENTS OF THE PACK
Before you start the installation make sure that the pack contains the following items:
Contents of the pack
Note: The modem can be either in white or black colour.
253156400-A_GIR 1201 V2 STD-gb.i4 4 14/10/2008 16:59:47

SAGEM F@st™ 1201/1241 V2
3
Make sure that the modem is not connected to your computer before you start
the installation from the CD-ROM.
2 CONNECTING YOUR MODEM
Connection
Follow the procedure according to the stages described in the CD-ROM installation and
connect your telephone in accordance with the drawing below:
2.2 CONNECTING ADDITIONAL TELEPHONES
Make the connections according to the diagram opposite.
2.1 CONNECTING YOUR ROUTER
253156400-A_GIR 1201 V2 STD-gb.i5 5 14/10/2008 16:59:48

4
SAGEM F@st™ 1201/1241 V2
3 INSTALLATION FROM THE CD-ROM
Make sure that the modem is not connected to your computer before you start
the installation from the CD-ROM.
The installation procedure described below was undertaken in Windows VistaTM.
Installation in other Windows® (98, ME, 2000 and XP) can be slightly different.
 insert the CD-ROM into the
relevant drive; the screen oppo-
site will appear:
 click on Next.
Installation from the CD-ROM
 The screen opposite describes
the precautions to be taken
during the installation.
 click on Next.
253156400-A_GIR 1201 V2 STD-gb.i6 6 14/10/2008 16:59:51

SAGEM F@st™ 1201/1241 V2
5
The screen opposite will appear.
Select the mode of connection
that you wish (Ethernet or USB)
to connect your modem to your
computer.
Installation from the CD-ROM
253156400-A_GIR 1201 V2 STD-gb.i7 7 14/10/2008 16:59:52

6
SAGEM F@st™ 1201/1241 V2
Installation from the CD-ROM
If you selected «Use the Ethernet
cable», click on Next.
Follow the instructions provided by the
install screens by pluging in the modem
supply, switching it on and connecting the
ADSL line and then connect the
modem to your computer using the
yellow Ethernet cable.
Once you have made these connections,
an Internet connection screen will appear.
You must enter your username then your
connection password.
This information is provided by your Internet Service Provider (ISP).
Once you have entered the conguration
parameters, a window will appear listing
the different steps in the installation.
Once all these steps are complete, an
end of the installation window will appear
telling you that your modem has been
correctly installed.
Click on nish.
You may now use your Internet access.
The "http://sagem-communications.com"
site will open.
3.1 INSTALLATION ON THE ETHERNET PORT
253156400-A_GIR 1201 V2 STD-gb.i8 8 14/10/2008 16:59:58

SAGEM F@st™ 1201/1241 V2
7Installation from the CD-ROM
If you selected «Use the USB cable»,
click on Next.
Follow the instructions provided by the
install screens by pluging in the modem
supply, switching it on and connecting the
ADSL line and then connect the modem to
your computer using the blue USB cable.
Once you have made these connections,
an Internet connection screen will appear.
You must enter your user name then your
connection password.
This information is provided by your Internet Service Provider (ISP).
3.2 INSTALLATION ON THE USB PORT
Once you have entered the conguration
parameters, a window will appear listing
the different steps in the installation.
Once all these steps are complete, an
end of the installation window will appear
telling you that your modem has been
correctly installed.
Click on nish.
You may now use your Internet access.
The "http://sagem-communications.com"
site will open.
253156400-A_GIR 1201 V2 STD-gb.i9 9 14/10/2008 17:00:03

SAGEM F@st™ 1201/1241 V2
8
3.3 REINSTALLING OR UNINSTALLING YOUR MODEM
If your installation failed or that you want uninstall your modem, insert again your
CD-ROM in the relevant drive; the following screen will appear:
Installation from the CD-ROM
Click on
«You want to congure your modem»" or
«You want to uninstall your modem»
according to your choice, then follow the
instructions displayed on the screen.
253156400-A_GIR 1201 V2 STD-gb.i10 10 14/10/2008 17:00:04

SAGEM F@st™ 1201/1241 V2
9Troubleshooting
4 TROUBLESHOOTING
Users can locate the fault using the following sources:
Status of the LEDs on the front,
Information accessible by your modem’s built-in HTTP controller,
 Modem supervision,
 «Diagnostics» tools.
4.1 STATUS OF THE LEDS ON THE FRONT
Status Power Link Data Ethernet USB
On steady Power
present
Synchronised
ADSL line
Public address
available
Active
Ethernet
link
Active USB
link
Blinking
Failure
detected
at the time
of starting
XAt WAN
trafc rate
At LAN
trafc rate
At LAN
trafc rate
Blinking
quickly X
ADSL
synchronisation
training X X X
Blinking
slowly XADSL line
not connected
Off Power not
present X
Public address
unavailable
or Bridge
mode
or ADSL down
Inactive
Ethernet
link
Inactive
USB
link
All LEDs are green.
253156400-A_GIR 1201 V2 STD-gb.i11 11 14/10/2008 17:00:04

SAGEM F@st™ 1201/1241 V2
10
4.2 MODEM SUPERVISION
LEDs
Bit rate
Displays the nominal downlink bit rate
Displays the nominal uplink bit rate
Troubleshooting
Green ADSL line synchronised
Yellow ADSL line synchronising
Red ADSL line not connected
Green Connected Public address (WAN) distributed to
the modem
Yellow Waiting for ISP ADSL line synchronising
Off
Adsl Down Public address (WAN) not distributed to
the modem or ADSL line not conneted
Not congured No VC (Virtual Channel)
Router rebooting Modem is rebooting
Red Access denied Erroneous Login and/or password
This is displayed permanently in a box at the top right of each window in the HTTP congu-
ration tool.
To access the conguration tool:
open your browser then enter the following in the address bar:
 the following URL : http://myrouter,
 or the following address : http://192.168.1.1 (see note).
A “Login” window will appear.
 enter admin in the «Username» field (see note).
 enter admin in the «Password» field (see note).
Note: This value is specific to the ISP.
You may now access your router’s HTTP conguration tool.
253156400-A_GIR 1201 V2 STD-gb.i12 12 14/10/2008 17:00:05

SAGEM F@st™ 1201/1241 V2
Troubleshooting
11
To access this tool:
open the configuration tool (see the modem supervision section).
select the “Status” heading then the “Diagnostics” menu in the relevant list located in
the left of each window, the following screen woll appear:
Buttons
Update the data displayed on the screen
Reboot your modem
4.3 «DIAGNOSTICS» TOOL
253156400-A_GIR 1201 V2 STD-gb.i13 13 14/10/2008 17:00:07

SAGEM F@st™ 1201/1241 V2
12
If a test displays a «FAIL» status, click on «Help» then the «Rerun
Diagnostic Tests» button at the bottom of the «Help» page to make sure that
the test was suitable. If the test still displays «FAIL», you must follow the repair
procedure displayed on this page.
A hypertext link (help) enables the user to access contextual help. This help
provides explanations about the status of the connection (PASS green, DOWN
orange and FAIL red) and provides the appropriate repair procedures.
The result of the tests carried out by your modem’s conguration tool is displayed in the
«Diagnostics» window. These tests relate to the connections to the LAN, your DSL Service
Provider and your Internet Service Provider (ISP).
IMPORTANT
If you are having trouble connecting to the Internet we recommend that you restart your
modem or possibly return to the factory conguration using the procedures described
below.
Restarting your modem
To restart your modem, click on the «reboot» button in the top right of your HTTP congu-
ration tool’s welcome page.
Returning to the factory conguration
To return to the factory conguration:
 in the top left of your HTTP conguration tool’s welcome page select the Management
heading then the Restore Default sub-menu in the Settings menu.
 or press and hold for about 15 seconds on the button marked «RESET» on the back of
your modem.
Connection status
Status Colour Meaning
PASS Green indicates that the test was carried out correctly
DOWN Orange indicates that an interface (ETH or USB) was not detected
FAIL Red indicates that a test failed or that a command cannot be
launched.
Troubleshooting
253156400-A_GIR 1201 V2 STD-gb.i14 14 14/10/2008 17:00:07

SAGEM F@st™ 1201/1241 V2
Safety instructions
13
5 SAFETY INSTRUCTIONS
Environment
The modem should be installed and used inside a building.
The room temperature should not exceed 45ºC.
The modem can be placed on a desktop or xed vertically in its wall mounting.
The modem should not be exposed to strong sunlight or placed near a substantial
source of heat.
The modem should not be placed in an environment where it would be subjected to
considerable steam condensation.
The modem should not be exposed to splashes of water.
The modem’s casing should not be covered.
The modem and its peripherals should not be used for outdoor transmissions.
Power supply source
The modem’s mains adapter should not be covered.
The modem comes with its own mains adapter. It should not be used with another
adapter.
This class II adapter does not need to be grounded (earthed). The connection to the
electrical network should comply with the indications given on the label.
Use a readily accessible mains outlet located near the modem. The power supply cord
is 2 m long.
Arrange the power supply cord in such a way as to avoid any accidental power cut to
the modem.
The modem is designed to be connected to a GG- (ground-to-ground) or GN- (ground-
to-neutral) type power supply network.
The modem is not designed to be connected to an electrical installation with IT type
diagram (neutral connected to earth through an impedance).
Protection against short-circuits and leaks between phase, neutral and earth should be
provided by the building’s electrical installation. The power supply circuit for this
equipment should be tted with 16 A overcurrent protection and differential protection.
The modem should be connected to the mains via a readily accessible wall socket
ensuring the electric cutting.
Maintenance
It is prohibited to open the casing. This must be done only by qualied personnel appro-
ved by your supplier.
Do not use liquid or aerosol cleaning agents.
253156400-A_GIR 1201 V2 STD-gb.i15 15 14/10/2008 17:00:08

SAGEM F@st™ 1201/1241 V2
14
5 SAFETY INSTRUCTIONS (CONTD.)
Safety level
primary power source access HPV (Hazardous Primary Voltage circuit)
Bipolar AC mains socket
DC power supply access SELV (Safety Extra Low Voltage)
Miniature xed connector (Power)
Type B USB access (USB) SELV
RJ45 Ethernet access (Ethernet) SELV
RJ11 line access (Line) TNV3 (Telecommunication Network Voltage level 3
circuit)
Safety instructions
Products bearing this symbol comply with EMC regulations as well as the Low Voltage
Directive published by the Commission of the European Community (CEC).
EC Declaration
EC compliance declaration
Sagem Communications declares that the product named SAGEM F@st™ 1201 V2 or
SAGEM F@st™ 1241 V2 complies with the demands of the European Community directi-
ves 1995/5/EC as well as with the essential demands of the directives 89/336/EEC dated
03/05/1989 and 73/23/EEC dated 19/02/1973.
The EC compliance declaration for the SAGEM F@st™ 1201 V2 and SAGEM F@st™
1241 V2 is implemented within the framework of the R&TTE directive.
253156400-A_GIR 1201 V2 STD-gb.i16 16 14/10/2008 17:00:08

15
SAGEM F@st™ 1201 V2
Notes:_____________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
_________________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
_________________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
253156400-A_GIR 1201 V2 STD-gb.i17 17 14/10/2008 17:00:08

SAGEM F@st™ 1201/1241 V2
16
Registered trademarks
SAGEM F@stTM is a registered trademark of Sagem Communications.
SAGEM is a registered brand of SAFRAN Group.
Mac OS®is a registered trademark of Apple Computer, Inc.
Windows®is a registered trademark of Microsoft Corporation.
Copyright
Sagem Communications document. Reproduction and disclosure prohibited.
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
___________________________________________________________
253156400-A_GIR 1201 V2 STD-gb.i18 18 14/10/2008 17:00:08

For futher information on our products,
Please visit our Web site at:
www.sagem-communications.com
253 156 400 ed. A
3 000 323 061 R11 000 01
Siège social : 27, rue Leblanc - 75015 PARIS - FRANCE
Tél. : [phone] - Fax : [phone]
http://www.sagem-communications.com
Société Anonyme au capital de 158 291 895 euros - 440 294 510 RCS Paris
253156400-A_GIR 1201 V2 STD-gb.i19 19 14/10/2008 17:00:09