Saje NATURAL WELLNESS aroma Bright User manual

electric ceramic diffuser
diffuseur céramique électrique
Live healthier by improving
the quality of the air you breathe

3
table of contents
Diagram of Parts 1
Operating Instructions 2
Safety Instructions 3
Replacing the Halogen Bulb 4
Cleaning Instructions 5

1
diagram of parts
a. Water Bowl
b. Halogen Bulb
c. Replacement Halogen Bulb
d. Ceramic Base
e. On/Off Switch
A
B
CD
E

2
operating instructions
1. Carefully unpack all of the components.
2. Remove cushion disc from underneath the water bowl.
3. Fill water bowl 3/4 full with water, ensuring that water does
not spill into electrical components in base.
4. Add 15-25 drops (depending on preference) of your favourite
Saje diffuser blend.
5. Plug unit into electrical outlet and turn unit on using switch
on cord.
6. As the water warms, the healing essence of the diffuser blend
will fill the air ... enjoy!

3
safety instructions
1. Place on heat-resistant surface.
2. Do not move unit while in use or until unit has cooled down.
Water will get hot and could cause injury/burns if spilled on skin.
3. Never leave diffuser unattended while turned on.
4. While unit is on, water will warm up and evaporate; do not allow
unit to run when water bowl is empty; be sure to turn unit off
when empty.
5. Allow water bowl to cool before refilling to prevent cracking.
6. Do not look directly at bulb when lit.
7. For indoor use only.
8. Do not use if ceramic is broken.
9. Turn off and unplug when not in use.
10. Use only with 120 volt/25 watt halogen bulb with twist and lock
(GU10) base.
11. Keep out of reach of children and pets.
12. Do not plug in with wet hands.

4
replacing the halogen bulb
1. Turn unit off and let it cool for at least 10 minutes.
2. Use a soft cloth to grasp the bulb, turn bulb counter clockwise
and remove old bulb.
3. Insert the new bulb by aligning the bulb prongs with the holes
in the base and turn clockwise; ensure that the bulb is sitting
securely in the base (not loose).

5
cleaning instructions
1. Allow unit to cool down completely before cleaning.
2. Turn unit off and unplug from electrical outlet.
3. Do not allow the interior of unit base to get wet; the outside
may be wiped with a soft damp cloth.
3. Essential oil residue in water bowl may be cleaned using rubbing
alcohol and a soft cloth or paper towel.

Imported by/Importé par:
saje natural wellness
vancouver, bc canada v
6
k
1
n
8
saje.com
| 1-877-
ask-saje