Salonserve SEQ343 User manual

UV-STERILIZER
Repair date: Date of inspection:
Maintenance units: Repairer's signature:
Please use a T5/6W UV bulb with wave length of 220-275nm. Quartz UV bulb is recommended
for best performance. If quartz UV bulb is not available, please use a T5 6W High Boron UV bulb.
Turn off the unit and unplug the cord from power outlet.
Unscrew the faulty UV bulb as indicated on the diagram (1).
Screw in the new UV bulb as indicated on the diagram (2).
Replacing the UV bulb
●
●
●
●
∠90°
∠90°
(1) (2)
UV STERILISER CABINET
UVC
SEQ343
Maintenance Record:
Salonserve Hair & Beauty Supplies
Lexicon House, Station Road,
Irthlingborough, Northants, NN9 5QF
01933 410 022
www.salonserve.com

1. When cleaning the unit, use a damp cloth or towel, with neutral detergent; do not use acid,
alkaline or corrosive or poisonous detergents.
2. After usage of the unit, disconnect the power line. If the unit will not be used for a long time or
needs maintenance, please make sure the power is disconnected.
3. Designed for use by professionals only.
●
●
●
●
UV light is hazardous to your health, please don’t expose yourself directly to the UV lights. This
product should never be operated by or in close proximity to children.
Unplug from electrical outlet when not in use.
Do not op erat e this de vice i f i t has a dam a ged cord or plug, if it is not working properly,
if it has been dropped or damaged, or dropped in water.
Do not use outdoors. This product is designed for indoor use only.
Do not place device where it can fall or be pulled into a tub or sink. Do not place in or drop
into water or other liquid, and always store in a dry place.
Never attempt to disassemble or repair the product by yourself.
●
3. Turn the timer knob anti-clockwise
to ON position, the unit will switch
on and stay on until turned off
manually.
5. To protect users from hazards of UV lights, if the d oor is opened during sterilizing
process, the microswitch will be actived and automatically switch off the unit. Once
the door is closed, the unit will resume working.
4. Turn the timer knob clockwise to set up desired
disinfection time. Recommended disinfection time is
10 minutes for regular operations. The unit will
automatically switch off when it reaches the set
time.
Warning
Maintenance
●
●
1. Instructions for use are provided with the appliance so that the appliance can be used safely.
2. If it is necessary to take precautions during user maintenance, appropriate details shall be given.
3. Do not allow children to touch or play with with the appliance.
4. Cleaning and user maintenance shall not be made by children without supervision
5. The specific instructions related to the safe operation of this appliance is collated together in the front section
of the user instructions.
6. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Operating Instructions
Features:
This UV sterilizing cabinet is ideal for sterilising tools and accessories in beauty, hair
and nail salons. Easy and convenient to operate. Efficiently kills germs and viruses on
your tools and accessories.
Specification Parameters
Rated Voltage
Rated Frequency
Rated Input Power
UV Bulb Type
Suggested time of Disinfection
Servicing life of UV Lamps
110V~120V 220V~240V
60Hz/50Hz
8W
T5 6w Quartz bulb 220~275nm
10 minitues
5000 hours
8W
1. For first time usage, please clean the
cabinet and the shelves thoroughly.
Make sure the cabinet and shelves
are completely dry before operation.
Product Specification
ON
OFF
10
20
30
UV Lamp
Power Cord
2. Put the tools and accessories that need
disinfection on the shelves in the cabinet.
Close the door and connect the power
supply.
Timer & ON/OFF
Switch
Magnetic Door Closure
Automatic Microswitch
Top Shelf
Bottom Shelf
Door
ON
OFF
10
20
30
ON
OFF
10
20
30