Salter PT-297 User manual

OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This ma ual is available at www.salter.es
1
ENGLISH
PT-297 CINTA DE CORRER MOTORIZADA
MOTORIZED TREADMILL
MANUAL DEL USUARIO
OWNER’S MANUAL
ESPAÑOL
ENGLISH

OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This ma ual is available at www.salter.es
2
ENGLISH
1. SA ETY INSTRUCTIONS
WARNING: To reduce the risk of serious injury, read the following safety instructions before using the equipment.
1. Read all war i gs posted o the equipme t.
2. Read this Ow er's Ma ual a d follow it carefully before usi g the equipme t. Make sure that it is properly
assembled a d tighte ed before use.
3. We recomme d that two people be available for assembly of this product.
4. Keep childre a d pets away from the equipme t. Do ot allow childre a d pets to use or play o the equipme t.
Always keep childre a d pets away from the equipme t whe it is i use.
5. It is recomme ded that you place this exercise equipme t o a equipme t mat.
6. Set up a d operate the equipme t o a solid level surface. Do ot positio the equipme t o loose rugs or u eve
surfaces.
7. I spect the equipme t for wor or loose compo e ts prior to each use.
8. Tighte / replace a y loose or wor compo e ts prior to usi g the equipme t.
9. Co sult a physicia prior to comme ci g a exercise program. If, at a y time duri g exercise, you feel fai t, dizzy,
or experie ce pai , stop a d co sult your physicia .
10. Follow your physicia 's recomme datio s i developi g your ow perso al fit ess program.
11. Always choose the workout which best fits your physical stre gth a d flexibility level. K ow your limits a d trai
withi them. Always use commo se se whe exercisi g.
12. Before usi g this product, please co sult your perso al physicia for a complete physical exami atio .
13. Do ot wear loose or da gli g clothi g while usi g the equipme t.
14. Never exercise i bare feet or socks; always wear correct footwear, such as ru i g, walki g, or cross-trai i g
shoes.
15. Be careful to mai tai your bala ce while usi g, mou ti g, dismou ti g, or assembli g the equipme t loss of
bala ce may result i a fall a d serious bodily i jury.
16. Keep both feet firmly a d securely o the Foot Pedals while exercisi g.
17. The equipme t should ot be used by perso s weighi g over 120 kg.
18. The equipme t should be used by o ly o e perso at a time.
19. The equipme t is for semi-commercial, light-commercial a d home usage.
20. Mai te a ce: Replace the defective compo e ts immediately a d / or keep the equipme t out of use u til repair
the equipme t completely.
21. Make sure that adequate space is available for access to a d passage arou d the equipme t; keep at least a
dista ce of 1 meter from a y obstructio object while usi g the machi e
WARNING: Before starti g a y exercise or co ditio i g program you should co sult with your perso al physicia to
see if you require a complete physical exam. This is especially importa t if you are over the age of 35, have ever
exercised before, are preg a t, or suffer from a y ill ess.

OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This ma ual is available at www.salter.es
3
ENGLISH
2. MAIN PARTS
Incline Adjustment Switch
Running Belt
Wheel
Safety Key
Consol
e
Main rame
Speed Adjustment Switch
Handrail

OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This ma ual is available at www.salter.es
4
ENGLISH
3. HARDWARE KIT
Nº 74. 3.5 × 12 m/m
Sheet Metal Screw (4)
Nº 103. M6 (66 × 88)
Alle Wre ch (1)
Nº 126. M5 × 35m/m
Phillips Head Screw (2)
Nº 102. Combi atio M5 Alle Wre ch &
Phillips Head Screw Driver (1)
Nº99. 5/16" × 1/2"
Butto Head Socket Bolt (14)
Nº 125. M5 × 25m/m
Phillips Head Screw (2)
Nº 100. 5/16" × 18 × 1.5T
Flat washer (6)
Nº 101. 5/16" × 23 × 1.5T
Curved washer (8)
Nº 44. Safety Key (1) Nº 104. Lubrica t (1)

OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This ma ual is available at www.salter.es
5
ENGLISH
4. ASSEMBLY INSTRUCTIONS
STEP 1
Take out the treadmill from the carto a d lay it aside o the smooth grou d.
STEP 2
Co ect the Computer Cable (Lower)(53) with the Right Upright (4).
53
4
STEP 3
I sert the Uprights (L, R)(5,4) i to the Frame Base (2) with the 8pcs of 5/16" ×1/2" Butto Head Socket Bolts (99), 4pcs
of 5/16" x 18 x 1.5T Flat Washers (100) a d 4pcs of 5/16" × 23 × 1.5T Curved Washers (101) by usi g the Combi atio
M5 Alle Wre ch & Phillips Head Screw Driver (102).
99
100
101
99
2
102
100
99
101
99
4
5

OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This ma ual is available at www.salter.es
6
ENGLISH
STEP 4
Co ecti g the Computer Cable (Middle) (55) with the Computer Cable (Lower)(53).
55
53
STEP 5
I stall the Co sole Support (6) i to the Uprights (L,R) (5,4) with the 6pcs of 5/16" ×1/2" Butto Head Socket Bolts (99) ,
2pcs of 5/16" × 18 × 1.5T Flat Washers (100) a d 4pcs of 5/16" × 23 × 1.5T Curved Washers (101) by usi g the
Combi atio M5 Alle Wre ch & Phillips Head Screw Driver (102).
99
100
99
99
101
99
101
100
99
101
99
101
6
4
5

OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This ma ual is available at www.salter.es
7
ENGLISH
STEP 6
I stall the Outer Ha dlebar Covers (L & R) (129 & 130) o the Co sole Support (6) with the 4pcs of 3.5 × 12 m/m Sheet
Metal Screws (74) by usi g the Combi atio M5 Alle Wre ch & Phillips Head Screw Driver (102) a d tighte them.
130
129
6
74
74
74

OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This ma ual is available at www.salter.es
8
ENGLISH
STEP 7
Co ect the Computer Cable (Middle) (55) with the Computer Cable (21-10). Co ect the Co ecti g Cable (90-7) with
the Co ecti g Cable (21-9). Co ect 5-Pi HR receiver upper cable (21-11) a d 5-Pi HR receiver lower cable (90-8).
55
21-10
90-7
21-9
21-11
90-8
STEP 8
I sert the Co sole Assembly (21) i to the Co sole Support (6). I stall the Co sole Assembly (21) a d the Co sole
Support (6) with the 2pcs of M5×25mm Phillips Head Screws (125) a d 2pcs of M5×35mm Phillips Head Screws (126) by
usi g the Combi atio M5 Alle Wre ch & Phillips Head Screw Driver (102) a d tighte them.
6
21
126
126
125
NOTE: Tighten all screw after all components assembly complete.

OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This ma ual is available at www.salter.es
9
ENGLISH
5. CONSOLE INSTRUCTIONS
After tur i g o a d put o the safety key, the co sole will show up welcome greeti g the display total ru i g
mileage, hours, program versio a d the e ter ready mode. Whe total mileage accumulates to 100 km total ru i g
time to 150 hours, the system will show a lubricatio prompt. After this prompt is show two times, the message will
be deleted automatically.
5.1. WINDOW DISPLAYS
TIME：Accumulated ru i g time from 00:00~99:59 or cou t-dow time from 10~99:00.
SPEED： Showi g the ru i g speed of the tread belt from 1KM/h(0.6)~16KM/h(10)
DISTANCE：Accumulated ru i g dista ce from 0.1~99.99KM.
CALORIES：Showi g the fat bur t from 0.1~999.9 calories.
INCLINE：Showi g 16 i cli e levels from 0~15.
PULSE：Showi g the heart rate value either weari g heart rate mo itor stripe or grippi g ha d pulse se sor, the heart
rate value is displayed i this wi dow.
LAPS： Displayi g track with o e circle sta ds for 0.4KM with value from 0~99.
5.2. UNCTION BUTTONS
START：Press this butto , while ru i g, to start the treadmill after displayi g 3, 2, 1, GO.
STOP： Press this butto to gradually stop the treadmill a d e d the workout.
AST： Press this butto to i crease workout speed. Press o ce each time i creases 0.1KM/h. The i creme t ca be
adjusted betwee 0.1 a d 1while setti g the treadmill factor.
SLOW： Press this butto to decrease workout speed. Press o ce each time decreases 0.1KM/h. The i creme t ca be
adjusted betwee 0.1 a d 1 while setti g the treadmill factor.
UP： Press this butto while ru i g to i crease the i cli e. Press o ce each time i creases o e i cli e level.

OWNER’S MANUAL V. 1 ENGLISH
PT-297 MOTORIZED TREADMILL
This ma ual is available at www.salter.es
10
ENGLISH
DOWN：Press this butto while ru i g to decrease the i cli e. Press o ce each time decreases o e i cli e level.
ENTER：Press this butto to e ter setti g the parameter. While setti g, press this butto agai to accept a d e ter
ext step. Press this butto while ru i g to switch the dot matrix wi dow betwee speed a d i cli e profiles.
AN： This fu ctio is optio al. Press this butto to the fa o /off.
PROGRAM: Press this butto to choose trai i g mode. There are four modes: MANUAL, RANDOM PROGRAM, USER
a d HRC (Heart Rate Co trol).
SELECT：While ru i g RANDOM PROGRAM, you ca keep o pressi g this butto to ge erate ew programs u til
there is the program you wa t.
SPEEDY BUTTON OR SPEED：There are five speedy butto s for speed: 2KM/h, 4 KM/h, 6 KM/h, 8 KM/h a d 10 KM/h
for speedy setti g.
SPEEDY BUTTON OR INCLINE：There are five speedy butto s for i cli e: 2, 4, 6, 8 a d 10 for speedy setti g.
Audio I put: This fu ctio is optio al. It plays the audio sig al by the speaker through the i ter al amplifier.
SA ETY KEY: Put o this key after tur i g o the power to fu ctio the treadmill. Taki g off this key automatically shuts
dow the treadmill.
5.3. FUNCTION MODES
SPEEDY START. The user initiates the training immediately.
Press START butto to speedily start the treadmill after tur i g o the power a d putti g o the safety key. Both speed
a d i cli e will be at the lowest value. The user has to adjust them to the desire levels ma ually usi g UP/DOWN y
SLOW/FAST butto s.
P0 MANUAL MODE. The user sets an objective parameter.
A. Use PROGRAM butto to choose PO MANUAL the press ENTER to set parameters. First is setti g weigh. Use
FAST/SLOW butto s to adjust the weigh a d press ENTER for ext setti g.
B. Now the AGE will be displayed. Use FAST/SLOW butto s to select the correct value the press ENTER for ext
setti g.
C. Choose o e of cou t-dow factors TIME, DISTANCE, CALORIES a d use SELECT to co firm the press ENTER to set
the value. You ca press SELECT to retur to select the factor agai .
D. Now the selected factor a d the value will be displayed. Use FAST/SLOW butto s to select the proper value a d
press START to start the treadmill a d fi ish the setti g.
E. You ca press STOP butto to retur to the previous step or START to start the treadmill.
RANDOM PROGRAM. This mode which is a profile includes speed and incline automatically generated by the
program. The user can continually choose the profiles until the one which is satisfied. It can also save the USER mode
and make adjustments until a most suitable profile is reached.
A. Use PPROGRAM butto to select RANDOM PROGRAM mode a d press ENTER to profile selectio .
B. Now the dot matrix will display speed profile for 5 seco ds the switch to i cli e profile for a other 5 seco ds a d
recycle. Press ENTER to select the profile a d forward to e ter ext parameter. Press SELECT butto to ge erate
ew profile. This step ca be co ti ued u til ENTER is pressed.
C. Now the value of the weight is displayed. Use FAST/SLOW butto s to adjust the weight a d press ENTER for ext
setti g.
D. Now the value of the age will be displayed. Use FAST/SLOW butto s to adjust the age a d press ENTER for ext
setti g.
E. Now the preset time 20:00 will be displayed. Use FAST/SLOW butto s to adjust for proper time duratio a d press
START to start the treadmill.
F. The profile ca be saved as a USER profile whe the workout is fi ished. The USER ca be adjusted whe ever is
ecessary.