Salus AX10RF Parts list manual

Wireless Controls
System Guide
As of December 31, 2018

Table of Contents
1.0 Introduction
Why SALUS? ........................................................................................................1.1
Using this Manual...................................................................................................1.1
2.0 System Overview
SALUS Wireless System Components with Internet Connection .......................................................2.1
SALUS Wireless System Components without Internet Connection ...................................................2.3
3.0 Device Installation
SG888ZB Gateway Installation.......................................................................................3.1
AC10RF Coordinator Installation.....................................................................................3.3
AWRT10RF Thermostat Mounting and Optional Temperature Sensor Wiring...........................................3.3
Home Screen and Key Functions ....................................................................................3.5
Display Screen Boot Sequence ......................................................................................3.5
AKL01PRF Zone Pump Wiring Center Installation.....................................................................3.6
AKL04/06PRF Zone Pump Wiring Center Installation .................................................................3.7
AKL08RF Zone Valve Wiring Center Installation.......................................................................3.9
AX10RF Receiver Installation .......................................................................................3.11
ARV10RFM Radiator Valve Actuator Installation .....................................................................3.12
4.0 AWRT10RF Pairing with Internet Connection (SG888ZB Gateway)
Pairing with AKL01/04/06PRF and AKL08RF Relay Controllers.........................................................4.1
Pairing with ARV10RFM or AVA10M30RF Radiator Valve Actuators ....................................................4.5
Pairing with AX10RF Receiver for Boiler Switching (RX1) ..............................................................4.9
Pairing with AX10RF Receiver for Zone Valve Switching (RX2)........................................................4.12
5.0 SALUS Smart Home Application – AWRT10RF Thermostat
Parameter Settings..................................................................................................5.2
Schedule Setup .....................................................................................................5.2
Remote Operation ..................................................................................................5.3
6.0 AWRT10RF Pairing without Internet Connection (AC10RF Coordinator)
Pairing with AKL01/04/06PRF and AKL08RF Relay Controllers.........................................................6.1
Pairing with ARV10RFM or AVA10M30RF Radiator Valve Actuators ....................................................6.4
Pairing with AX10RF Receiver for Boiler Switching (RX1) ..............................................................6.7
Pairing with AX10RF Receiver for Zone Valve Switching (RX2).........................................................6.9

Table of Contents
7.0 Resetting Factory Defaults
Resetting the SG888ZB Gateway with Internet Connection ...........................................................7.1
Resetting the SG888ZB Gateway without Internet Connection........................................................7.2
Resetting the AC10RF Coordinator without Internet Connection......................................................7.2
Resetting the AWRT10RF Wireless Radiant Thermostat ...............................................................7.3
Resetting the AKL01/04/06PRF Zone Pump or AKL08RF Zone Valve Wiring Center.....................................7.4
Resetting the AX10RF Receiver ......................................................................................7.5
Resetting the ARV10RFM Radiator Valve Actuator ....................................................................7.6
8.0 AWRT10RF Thermostat Settings & Parameters
Parameter & Settings Adjustments using the Display & Keypad .......................................................8.1
Table - AWRT10RF Wireless Radiant Thermostat Settings .............................................................8.2
Table - AWRT10RF Wireless Radiant Thermostat Parameters ..........................................................8.3
Schedule Setup using Display & Keypad .............................................................................8.5
9.0 AWRT10RF Wireless Radiant Thermostat Operation
Setting the HVAC Mode using the Display & Keypad..................................................................9.1
Changing the Temperature Setpoint in Non-programmable Mode....................................................9.1
Overriding Scheduled Temperature using the Display & Keypad ......................................................9.2
10.0 AWRT10RF Wireless Radiant Thermostat - Troubleshooting
Table - Error Messages .............................................................................................10.1
Reading Multiple Error Messages ...................................................................................10.2
Figure - Optional External Sensor Resistance Graph .................................................................10.2
A Appendix A

1.1
Introduction
Why SALUS?
SALUS designs and manufactures industry-leading hydronics, HVAC and fan coil products for
heating engineers and contractors who need to deliver customer satisfaction while driving
protability. We enable contractors to provide homeowners and building managers with the
comfort and control they need while reducing installation times and minimizing costly call-backs.
Our proven, innovative products, such as easy-to-install wireless hydronic controls, and patented,
industry rst auto-balancing actuators are advancing the industry.
SALUS also oers a broad ecosystem of smart home products, including connected thermostats, a
smart home hub, smart plugs, water valve shuto, and door and window sensors. A proven leader
in the European market since 2003, SALUS is currently expanding across North America.
Using this Manual
For the latest instructions go to: www.salusinc.com
Special Attention Boxes
This manual uses special attention icons to alert the reader of important safety concerns,
information important to reliable operation of the controls or helpful installation/setup information
Safety:
Indicates a condition which may cause severe personal
injury, death or major property damage
Important Information:
Indicates information which requires special attention
for correct operation of the control
Your Benet:
Indicates helpful installation or setup information
Section 1

2.1
System Overview
The SALUS Wireless System uses the Zigbee 3.0 communications protocol to provide a universal
language for smart components to work together seamlessly and securely, with or without an
internet connection.
SALUS Wireless System Components
with Internet Connection
By connecting the SG888ZB Gateway to your system router, the system is connected to the internet.
Monitor or adjust your system from anywhere via the SALUS Smart Home remote app for iOS or Android.
If the connection to the internet is lost, the system continues to function with the settings selected.
AX10RF- Receiver Congured
for a Boiler (RX1)
AKL01PRF-1 Zone Pump
Wiring Center
AX10RF- Receiver Congured
for a Zone Valve (RX2)
AWRT10RF Wireless
Radiant Thermostat
ARV10RFM/AVA10M30RF
Radiator Valve Actuator
SS882ZB- Door/Window
Sensor
SS881ZB-Embedded
Door Sensor
SX883ZB miniSmartPlug
AKL08RF-Zone Valve Wiring Center
AKL06PRF-6 Zone Pump
Wiring Center
AKL04PRF-4 Zone Pump
Wiring Center
SG8888ZB-Gateway
As a first time user please complete a few
simple steps to manage your account and
equipment. Let’s get started setting up your
new system.
Welcome to HeatLink®!
Create your profile
First Name
Last Name
Email Address
Confirm Email Address
Back HeatLink
Section 2

2.2
Download the SALUS Smart Home app on your iOS or Android device to for remote access to your
SALUS controls.
For security purposes, you will be prompted to set up a user prole including
username & password.
Use SALUS Smart Home to:
• Quickly view and monitor the status of your home and smart devices
• Set schedules and preferences for your connected thermostats, smart plugs and more
• Receive important real-time alerts and notications of any changes that occur with
your system
System Overview
Apple, the Apple logo, iPhone, and iPod touch are trademarks of
Apple Inc, registered in the U.S. and other countries. App Store is a
service mark of Apple Inc, registered in the U.S. and other countries
Google Play and the Google Play logo are trademarks of Google LLC.
As a first time user please complete a few
simple steps to manage your account and
equipment. Let’s get started setting up your
new system.
Welcome to HeatLink®!
Create your profile
First Name
Last Name
Email Address
Confirm Email Address
Back HeatLink
As a first time user please complete a few
simple steps to manage your account and
equipment. Let’s get started setting up your
new system.
Welcome to HeatLink®!
Create your profile
First Name
Last Name
Email Address
Confirm Email Address
Back HeatLink
As a first time user please complete a few
simple steps to manage your account and
equipment. Let’s get started setting up your
new system.
Welcome to HeatLink®!
Create your profile
First Name
Last Name
Email Address
Confirm Email Address
Back HeatLink
Section 2

2.3
System Overview
The AC10RF Coordinator uses Zigbee communication protocol to connect all system components,
providing wireless communication easily and securely without connecting to the internet.
SALUS Wireless System Components
without Internet Connection
AX10RF- Receiver Congured
for a Boiler (RX1)
AKL01PRF-1 Zone Pump
Wiring Center
AX10RF- Receiver Congured
for a Zone Valve (RX2)
ARV10RFM/AVA10M30RF
Radiator Valve Actuator
AKL08RF-Zone Valve Wiring Center
AKL06PRF-6 Zone Pump
Wiring Center
AKL04PRF-4 Zone Pump
Wiring Center
AC10RF- Coordinator
AWRT10RF Wireless
Radiant Thermostat
Section 2

3.1
Device Installation
Once the device is paired and installed in its intended location, check the operation to make sure
there are no issues with RF interference that will prevent it from operating correctly.
SG888ZB Gateway Installation
Install the SG888ZB Gateway in a central location close to a 120 VAC electrical receptical and free
from radio frequency interference . If you intend to connect the system to the internet, the gateway
should be close to your internet router.
1. Conrm that all required parts are present in the Gateway package: Gateway with port cover,
Ethernet Cable, USB Power Cable, USB Power Adapter and Installation/Quick Start Guide
2. Remove the port cover from the bottom of the Gateway by twisting it
¼ turn counterclockwise
3. If connecting the SG888ZB Gateway to the internet, attach the ethernet cable and the power
cable to the gateway only, making sure it is within reach of a router or ethernet connection
a. For best results, DO NOT CONNECT the power cable to electrical power outlet until after
ethernet cable is attached to the Router
b. If no internet connection is intended, it is not necessary to attach the ethernet cable to
the Gateway
4. Reattach the port cover on the Gateway
5. Connect the ethernet cable to the Router if desired
6. Plug the USB Power Cable into the USB Adapter and connect it to a 120 VAC outlet
SALUS components must be set up for wireless communication with the SG888ZB Gateway or with the
AC10RF Coordinator. This process, called “pairing”, should be performed with all devices installed in
their intended location. If the intended operating location is unsuitable for the pairing process due to
convenience or other factors, the device may be moved to a convenient location during pairing.
LOCK UNLOCK
Section 3

3.2
Device Installation
Wireless Internet
gateway
USB to
micro USB cable
USB power
adapter
To Internet router
(supplied by
network provider)
Plug into 120V outlet
Multi button
LED light ring
Ethernet cable
Gateway is connected to the internet and
communicating with SALUS Smart Home services
Gateway is not connected
to the internet
Gateway is waiting
for device pairing
Gateway is powering up and
attempting to establish connections
Gateway is in identify mode
Solid Blue
Solid Green Flashing Green
Solid Red Flashing Red
Connected to
SALUS Smart Home
services.
Not Connected
to the Internet
7. When the SG888ZB Gateway powers up, the lighted ring around the multi button will be
solid green. The light will then turn red. Once an internet connection is detected (if plugged
into a router) the light will turn green. Using the internet connection, the SG888ZB Gateway
will try to connect with the SALUS Smart Home services. If successful, the light will turn blue.
LED Indications
Section 3