Sams RSS-10v Instruction manual

RSS-10v
RSS-10a1
RSS-10a2
RSS-10va1
RSS-10va2
Analog video / audio switcher 10x1
Copyright © 1999 - 2014 Sams elektronik d.o.o.
Published: 30. october 2014.
Updated: 30. october 2014.
Z10-3 edition 1
Code: 002.201
002.206
002.207
002.208
002.209
ENGLISH
Sams elektronik d.o.o.
48 Zivka Davidovica st.
11050 Belgrade
Serbia
Tel/Fax: [phone]
[phone]
[email protected]
www.sams.rs
USER MANUAL FOR USE AND MAINTENANCE
Read the instructions before using the device.
Keep this manual for periodic usage.

RSS
Switchers
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
2
Dear User,
Thank you very much for purchasing our product.
Your purchase is a wise investment. The equipment you have purchased is manufactured with great care from
high-quality parts and materials. It is designed to fully meet the needs according to specications, if properly
installed, used and maintained according to the enclosed instructions.
Any technical failure or deciency that occurs during the warranty period specied on the invoice of the
purchased equipment will be inspected and serviced by Sams elektronik doo or an authorized service center of
the manufacturer, with the conditions set out in the warranty statement.
THIS DEVICE IS INTENDED FOR PROFESSIONAL USE.
WARRANTY STATEMENT
1. Product has declared characteristics. Within the warranty period, manufacturer ensures the removal of
technical failures, product defects or replacement of products if declared characteristics of the product are
changed.
2. If the goods are not delivered as specied with the contract, the consumer has the right to request from the
manufacturer / service provider to eliminate the lack of conformity, without charge, repair or replacement,
or to request an appropriate price reduction or terminate the contract.
3. Any repair or replacement must be made within a reasonable time without signicant inconvenience to
the consumer, taking into account the nature and the purpose for which the consumer has purchased the
product.
4. The consumer has the right to terminate the contract, if he can realize the right to repair or replacement,
or if the manufacturer / servicer has not completed repair or replacement within a reasonable time or if
the manufacturer / servicer did not perform repair or replacement without signicant inconvenience to the
consumer.
5. The consumer may not terminate the contract if the lack of conformity of the product is negligible.
6. The product will function properly when used in accordance with the user manual.
7. Period of servicing the product is 6 years from the launch on the market.
The product purchased outside the territory of Serbia does not fall under the terms of this warranty, only to 1
year factory warranty from date of purchase.
TERMS OF WARRANTY
1. The warranty period begins on the date of sale referred in the invoice.
2. The buyer loses the right to warranty if the defect cause failure from not following the user manual
instructions, improper installation, comes to mechanical damage during use, repairs and modications by
unauthorized persons, installation of non-genuine spare parts, and if the buyer does not comply with all
warnings listed in the user manual.
3. The warranty is voided if the device is damaged during the disturbances from the environment, natural
disasters (oods, hail, etc.), suffered an electric shock or lightning strike.
IMPORTANT NOTES
1. Be sure to thoroughly read the user manual.
If you have any doubts about the instructions, contact the technical support of the manufacturer.
2. Before contacting for technical help, please make sure that are provided with all necessary conditions for
normal operation.
3. If the malfunction or defect in the device does not eliminate within a reasonable time from the date of
failure, the warranty period shall be extended for as many days as the unit is in service.
4. For all maintenance interventions shall solely be authorized services listed in this Warranty Certicate.
WARRANTY

RSS
Switchers
Sams elektronik d.o.o. • [email protected] • www.sams.rs
elektronik
3
IMPORTANT SAFEY
WARNING
TO AVOID RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THE UNIT TO MOISTURE OR RAIN
The symbol “lightning in a triangle” is to alert the user to the presence of
high voltage. In poor conditions the user may be exposed to shock.
The symbol “exclamation mark in a triangle” is to alert the user to comply by
the terms of use in user’s manual, which is supplied with the device.
SAFETY WARNINGS
ELECTRICAL SHOCK HAZARD
DO N OT O PEN
CAUTION
RIZIK OD S TRUJNOG UDARA
NE O TVARATI
DOK JE P OD N APONOM
UPOZORENJE
CLASS I DEVICE
Grounding is connected to the chassis of the device.
The power supply is protected with fuse against overload.

RSS
Switchers
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
4
TECHNICAL SUPPORT AND SERVICE
Sams elektronik has made every effort to ensure that the equipment works in perfect condition. In
the event that problems that occur can not be resolved, or if you have any questions regarding this
equipment or information about other products produced from Sams elektronik, contact your local sales
representative or call Sams elektronik directly through one of the ways listed below:
Sales: [phone]
Technical support: [phone]
Service: [phone]
Email:
Sales - [email protected]
Technical support and service - [email protected]
Web site: www.sams.rs
Address:
SAMS ELEKTRONIK d.o.o.
48 Zivka Davidovica st
11050 Belgrade
Serbia
WARNING
TO AVOID ELECTRIC SHOCK, DO NOT OPEN COVER.
DEVICE MAINTENANCE REQUIRES PROFESSIONAL PERSON AUTHORIZED BY THE MANUFACTURER.
1. Read all safety and operating instructions before using the device.
2. Keep all safety and operating instructions.
3. Follow the instructions from the user manual.
4. Do not upgrade device, except in the case advised by the manufacturer.
5. Do not use the device in the presence of water and / or moisture.
6. Do not pour water or moisten the device with any type of liquid.
7. Openings on device are provided for ventilation.
8. Do not block air ow through the ventilation openings.
9. This product is powered by AC ~ 230V ± 10%, 50Hz.
10. This product is equipped with a three-wire cord with grounding.
11. This device is equipped with a protective fuse in the power outlet. Do not bypass fuse.
12. Do not replace the fuse. Replacement can be made by a person authorized by the manufacturer.
13. Do not bend the power cord so that it can be damaged.
14. Connect connectors as in the enclosed instructions. Deviations from the allowed values predicted
for the inputs and outputs of the device can cause severe damage and warranty void.
15. Do not use the device in an environment that contains ammable or explosive materials in any
physical state.
16. Turn off the power corde before cleaning. Do not use liquid, aerosol or ammable cleaners. Use
only a dry cloth.
17. Servicing is performed by a qualied person. Removing the cover user is exposed to high
voltages.
18. Never use the device when the cover is open and the device is powered on.
19. Do not expose to extreme high or low temperatures.
20. Do not expose to sudden temperature changes.
21. Call service in the following cases:
- The power cord or plug is damaged
- Liquid or foreign objects is inside the device
- The machine is exposed to water and moisture
- The device does not function according to specication
- The unit has been dropped or damaged
- The characteristics are signicantly changed
22. Use only specied replacement parts.
23. Professional person authorized by the manufacturer must check the device after completion of
service.
24. Allow a free rack unit (1RU) above and below the device for ventilation or put rack fan under the
device.
Pictures and drawings listed in this user manual are for information purposes only and may differ
from the actual device. Design and specications of the device may change without prior notice.

RSS
Switchers
Sams elektronik d.o.o. • [email protected] • www.sams.rs
elektronik
5
UNPACKING AND INSTALLATION....................................................................................6
MAINTENANCE..............................................................................................................6
REMOVAL AND STORAGE...............................................................................................6
DESCRIPTION...............................................................................................................7
INSTALLATION..............................................................................................................12
CABLE CONNECTION BETWEEN SWITCHER AND REMOTE ...............................................12
REMOTE CONTROL NSCU-10 .........................................................................................13
REMOTE CONTROL SCU-10............................................................................................14
NOTES .........................................................................................................................14
PageDescription
TABLE OF CONTENTS

RSS
Switchers
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
6
UNPACKING AND INSTALLATION
REMOVAL AND STORAGE
MAINTENANCE
The box contains:
- Device
- Power corde
- Remote control (optional)
- Connection cable (optional)
- User manual (optional)
Before use, check the contents of the box. For any deciency report to the seller or the manufacturer
of the product.
DEVICE IS INSULATED BY PROTECTIVE WRAP AND PACKED IN A CARDBOARD BOX.
DEVICE IS SENSITIVE TO SHAKES AND DROPS. HANDLE WITH CARE DURING TRANSPORT
AND ASSEMBLY.
Check if the product is damaged during transport.
1. Before dismantling the device, switch off the power, remove
the power cord and remove all other connectors.
2. Remove the four screws for fastening.
3. Remove the device from rack cabinet.
4. Wrap the machine in the foil to protect it from dust. Package
it in a box.
5. The device must be stored in a room without moisture.
The system maintains only person authorized by Sams elektronik
doo.
Any voluntarily opening device, upgrading or servicing is strictly
prohibited and is subject to warranty void, and the possibility of
injury.
Places for fastening
PROCEDURES FOR SAFE USE OF THE DEVICE:
1. - Remove the protective wrap from the chassis.
- For devices that are AC 230V / 50Hz powered, the device is supplied with power cord.
- Use only power corde that comes with the device.
2. Device is mounted in a 19“ special-purpose rack cabinets designed for this type of device. Screw
device with four screws. Screws for fastening are not supplied with the device.
3. The device must be connected to ground. A device that is not connected to the grounding does
not function properly according to factory declarations and can cause adverse effects on users and
other equipment.
4. Strictly comply to all steps for proper connection of devices in the system.
Illustration - mounted device

RSS
Switchers
Sams elektronik d.o.o. • [email protected] • www.sams.rs
elektronik
7
DESCRIPTION
II
8
ANALOG VIDEO SWITCHERS
• Sams elektronik d.o.o. • 48 Zivka Davidovica st. • 11050 Belgrade • Serbia • • [phone]; [phone] • [email protected] • www.sams.rs •
The RSS-10v video switcher provides analog composite video signals for production and broadcast environments in
a single rack mount (1RU). It can be controlled by a local or remote push button panel. Multiple RSS-10v routing
switchers can be linked together for multiply level switching. The ideal switch without signal drop provides from
vertical sync information obtained from incoming video signal and is not necessary to assign an external reference
(the condition is that all signals are synchronous).
TECHNICAL SPECIFICATIONS
GENERAL INFORMATION
- Code: ....................................................................002.201
- Weight: ................................................................... 1.5 Kg
- Type: .........................................................1RU rack frame
- Dimensions: ........................................ 1RU x 19” x 150mm
- Required: ........................................ remote control SCU-10
- Delivery includes: ............. device, power corde, user manual
INPUT
- Number: .............................................10, BNC, loop trough
- High impedance bridging: ....................1V p-p nominal video
OUTPUT
- Number: ..........................................................................2
- Connectors: ................................................................ BNC
- Impedance: .................................................................75Ω
- Hum on output: ...................................... > 43dB at 5.5MHz
- Nominal output level: ............................................... 1V p-p
PERFORMANSE
- Gain: .............................................................-3dB to +3dB
- Gain stability: .................................................... < ± 0.1dB
- Frequency response: .................. ± 0.1dB (50Hz do 5.5MHz)
ORDERING INFORMATION
Code Name Description
002.201 RSS-10v Analog video switcher 10x1
002.503 SCU-10L Remote control 10x1
Specications and designs are subject to change without notice
RSS-10v
Analog video switcher 10x1
- 20 MHz bandwidth
- 10 x 1 video switcher
- High performance at a reasonable price
- Audio - follow - video
- Vertical interval switching
- Compact 1 RU size
- Power down memory recovery
front side
rear side
POWER
- Voltage: ................................................. ~230V AC ± 10%
- Power: .......................................................................30W
- Frequency: ................................................................ 50Hz
- Overload protection: .............. front Mounted Circuit Breaker
TEMPERATURE
- Performance: .......................................................... 5-40°C
- Operating: .............................................................. 0-50°C

RSS
Switchers
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
8
II
11
ANALOG AUDIO SWITCHERS
• Sams elektronik d.o.o. • 48 Zivka Davidovica st. • 11050 Belgrade • Serbia • • [phone]; [phone] • [email protected] • www.sams.rs •
The RSS-10a2 switcher provides analog stereo audio signals for production and broadcast environments in a single
rack mount (1RU). It can be controlled by a local or remote push button panel.
TECHNICAL SPECIFICATIONS
GENERAL INFORMATION
- Code: ....................................................................002.207
- Weight: ................................................................... 1.5 Kg
- Type: ......................................................... 2RU rack frame
- Dimensions: ........................................ 2RU x 19” x 150mm
- Required: ........................................ remote control SCU-10
- Delivery includes: ............. device, power corde, user manual
INPUT
- Number: ................................10, 3-pin terminal strip or XLR
- Impedance: ............................................ > 40KΩ, balanced
- Common Mode Rejection: ............................> 80dB at 50Hz
ORDERING INFORMATION
Code Name Description
002.207 RSS-10a2 2CH analog audio switcher 10x1
002.503 SCU-10L Remote control 10x1
Specications and designs are subject to change without notice
RSS-10a2
2ch analog audio switcher 10x1
- 10 x 1 dual audio switcher
- High performance at a reasonable price
- Audio - follow - video
- Power down memory recovery
front side
front side
rear side with XLR connectors
rear side with 3-pin terminal strip connectors
OUTPUT
- Number: ................... 1 balanced, 3-pin terminal strip or XLR
- Impedance: .................................................................10Ω
- Output to output Isolation: ........... > 70dB at 20Hz to 20KHz
- Maximum Output Level: .............................................+6dB
PERFORMANSE
- Gain: .............................................................-6dB to +6dB
- Frequency response: ................. < ± 0.1dB (20Hz to 20KHz)
- S/M ratio: ....................... > 100dB unity gain 20Hz to 20KHz
- TDH: .............................................0.01% at 20Hz to 20KHz
- Inter channel Cross talk: .............. > 90dB at 20Hz to 20KHz
POWER
- Voltage: ................................................. ~230V AC ± 10%
- Power: .......................................................................30W
- Frequency: ................................................................ 50Hz
- Overload protection: .............. front Mounted Circuit Breaker
TEMPERATURE
- Performance: .......................................................... 5-40°C
- Operating: .............................................................. 0-50°C

RSS
Switchers
Sams elektronik d.o.o. • [email protected] • www.sams.rs
elektronik
9
II
12
ANALOG AUDIO SWITCHERS
• Sams elektronik d.o.o. • 48 Zivka Davidovica st. • 11050 Belgrade • Serbia • • [phone]; [phone] • [email protected] • www.sams.rs •
The RSS-10a1 switcher provides analog mono audio signals for production and broadcast environments in a single
rack mount (1RU). It can be controlled by a local or remote push button panel.
TECHNICAL SPECIFICATIONS
GENERAL INFORMATION
- Code: ....................................................................002.206
- Weight: ................................................................... 1.5 Kg
- Type: ......................................................... 1RU rack frame
- Dimensions: ........................................ 1RU x 19” x 150mm
- Required: ........................................ remote control SCU-10
- Delivery includes: ............. device, power corde, user manual
INPUT
- Number: ................................10, 3-pin terminal strip or XLR
- Impedance: ............................................ > 40KΩ, balanced
- Common Mode Rejection: ............................> 80dB at 50Hz
OUTPUT
- Number: ................... 1 balanced, 3-pin terminal strip or XLR
- Impedance: .................................................................10Ω
- Output to output Isolation: ........... > 70dB at 20Hz to 20KHz
- Maximum Output Level: .............................................+6dB
PERFORMANSE
- Gain: .............................................................-6dB to +6dB
- Frequency response: ................. < ± 0.1dB (20Hz to 20KHz)
- S/M ratio: ....................... > 100dB unity gain 20Hz to 20KHz
- TDH: .............................................0.01% at 20Hz to 20KHz
- Inter channel Cross talk: .............. > 90dB at 20Hz to 20KHz
ORDERING INFORMATION
Code Name Description
002.206 RSS-10a1 1CH analog audio switcher 10x1
002.503 SCU-10L Remote control 10x1
Specications and designs are subject to change without notice
RSS-10a1
1ch analog audio switcher 10x1
- 10 x 1 mono audio switcher
- High performance at a reasonable price
- Audio - follow - video
- Power down memory recovery
front side
rear side with XLR connectors
rear side with 3-pin terminal strip connectors
POWER
- Voltage: ................................................. ~230V AC ± 10%
- Power: .......................................................................30W
- Frequency: ................................................................ 50Hz
- Overload protection: .............. front Mounted Circuit Breaker
TEMPERATURE
- Performance: .......................................................... 5-40°C
- Operating: .............................................................. 0-50°C

RSS
Switchers
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
10
II
14
COMBINED SWITCHERS
• Sams elektronik d.o.o. • 48 Zivka Davidovica st. • 11050 Belgrade • Serbia • • [phone]; [phone] • [email protected] • www.sams.rs •
The RSS-10va2 video and stereo audio switcher provides analog composite video and analog stereo audio signals
for production and broadcast environments in a single rack mount (1RU). It is available in video only, audio only
and video with audio packages. Device can be controlled by a local or remote push button panel. The ideal switch
without signal drop provides from vertical sync information obtained from incoming video signal and is not necessary
to assign an external reference (the condition is that all signals are synchronous).
TECHNICAL SPECIFICATIONS
GENERAL INFORMATION
- Code: ....................................................................002.209
- Weight: ................................................................... 1.5 Kg
- Type: ......................................................... 1RU rack frame
- Dimensions: ........................................ 1RU x 19” x 150mm
- Required: ........................................ remote control SCU-10
- Delivery includes: ............. device, power corde, user manual
VIDEO SWITCHER
INPUT
- Number: .............................................10, BNC, loop trough
- High impedance bridging: ....................1V p-p nominal video
OUTPUT
- Number: ..........................................................................2
- Connectors: ................................................................ BNC
- Impedance: .................................................................75Ω
- Hum on output: ...................................... > 43dB at 5.5MHz
- Nominal output level: ............................................... 1V p-p
PERFORMANSE
- Gain: .............................................................-3dB to +3dB
- Gain stability: .................................................... < ± 0.1dB
- Frequency response: .................. ± 0.1dB (50Hz do 5.5MHz)
ORDERING INFORMATION
Code Name Description
002.209 RSS-10va2 Video / 2CH audio switcher 10x1
002.503 SCU-10L Remote control 10x1
Specications and designs are subject to change without notice
RSS-10va2
Analog video / 2ch audio switcher 10x1
- 20 MHz bandwidth
- 10 x 1 video / dual audio switcher
- High performance at a reasonable price
- Audio - follow - video
- Vertical interval switching
- Compact 1 RU size
- Power down memory recovery
front side
rear side
AUDIO SWITCHER
INPUT
- Number: ................................10, 3-pin terminal strip or XLR
- Impedance: ............................................ > 40KΩ, balanced
- Common Mode Rejection: ............................> 80dB at 50Hz
OUTPUT
- Number: ................... 1 balanced, 3-pin terminal strip or XLR
- Impedance: .................................................................10Ω
- Output to output Isolation: ........... > 70dB at 20Hz to 20KHz
- Maximum Output Level: .............................................+6dB
PERFORMANSE
- Gain: ............................................................ -6dB to +6dB
- Frequency response: ................. < ± 0.1dB (20Hz to 20KHz)
- S/M ratio: ....................... > 100dB unity gain 20Hz to 20KHz
- TDH: .............................................0.01% at 20Hz to 20KHz
- Inter channel Cross talk: .............. > 90dB at 20Hz to 20KHz
POWER
- Voltage: ................................................. ~230V AC ± 10%
- Power: .......................................................................30W
- Frequency: ................................................................ 50Hz
- Overload protection: .............. front Mounted Circuit Breaker
TEMPERATURE
- Performance: .......................................................... 5-40°C
- Operating: .............................................................. 0-50°C

RSS
Switchers
Sams elektronik d.o.o. • [email protected] • www.sams.rs
elektronik
11
II
15
COMBINED SWITCHERS
• Sams elektronik d.o.o. • 48 Zivka Davidovica st. • 11050 Belgrade • Serbia • • [phone]; [phone] • [email protected] • www.sams.rs •
The RSS-10va1 video and stereo audio switcher provides analog composite video and analog mono audio signals
for production and broadcast environments in a single rack mount (1RU). It is available in video only, audio only
and video with audio packages. Device can be controlled by a local or remote push button panel. The ideal switch
without signal drop provides from vertical sync information obtained from incoming video signal and is not necessary
to assign an external reference (the condition is that all signals are synchronous).
TECHNICAL SPECIFICATIONS
GENERAL INFORMATION
- Code: ....................................................................002.206
- Weight: ................................................................... 1.5 Kg
- Type: ......................................................... 1RU rack frame
- Dimensions: ........................................ 1RU x 19” x 150mm
- Required: ........................................ remote control SCU-10
- Delivery includes: ............. device, power corde, user manual
VIDEO SWITCHER
INPUT
- Number: .............................................10, BNC, loop trough
- High impedance bridging: ....................1V p-p nominal video
OUTPUT
- Number: ..........................................................................2
- Connectors: ................................................................ BNC
- Impedance: .................................................................75Ω
- Hum on output: ...................................... > 43dB at 5.5MHz
- Nominal output level: ............................................... 1V p-p
PERFORMANSE
- Gain: .............................................................-3dB to +3dB
- Gain stability: .................................................... < ± 0.1dB
- Frequency response: .................. ± 0.1dB (50Hz do 5.5MHz)
ORDERING INFORMATION
Code Name Description
002.206 RSS-10va1 Video / 1CH audio switcher 10x1
002.503 SCU-10L Remote control 10x1
Specications and designs are subject to change without notice
RSS-10va1
Analog video / 1ch audio switcher 10x1
- 20 MHz bandwidth
- 10 x 1 video / mono audio switcher
- High performance at a reasonable price
- Audio - follow - video
- Vertical interval switching
- Compact 1 RU size
- Power down memory recovery
front side
rear side
AUDIO SWITCHER
INPUT
- Number: ................................10, 3-pin terminal strip or XLR
- Impedance: ............................................ > 40KΩ, balanced
- Common Mode Rejection: ............................> 80dB at 50Hz
OUTPUT
- Number: ................... 1 balanced, 3-pin terminal strip or XLR
- Impedance: .................................................................10Ω
- Output to output Isolation: ........... > 70dB at 20Hz to 20KHz
- Maximum Output Level: .............................................+6dB
PERFORMANSE
- Gain: .............................................................-6dB to +6dB
- Frequency response: ................. < ± 0.1dB (20Hz to 20KHz)
- S/M ratio: ....................... > 100dB unity gain 20Hz to 20KHz
- TDH: .............................................0.01% at 20Hz to 20KHz
- Inter channel Cross talk: .............. > 90dB at 20Hz to 20KHz
POWER
- Voltage: ................................................. ~230V AC ± 10%
- Power: .......................................................................30W
- Frequency: ................................................................ 50Hz
- Overload protection: .............. front Mounted Circuit Breaker
TEMPERATURE
- Performance: .......................................................... 5-40°C
- Operating: .............................................................. 0-50°C

RSS
Switchers
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
12
1
2
3
Connect the power cord.
The device works only on AC ~ 230 V / 50 Hz.
Connect all necessary connectors
before the unit is turned on.
Turn on the device by pressing
power switch.
connection
with
remote
control
connection
with
remote
control
connection
with
remote
control
connection
with
remote
control
RSS-10v, rear side
RSS-10v, front side
RSS-10a1, rear side
RSS-10a2, rear side
RSS-10va2, rear side
FUSE: 500mA
AC ~230V/50Hz
VIDEO
INPUT
OUTPUT
1 2 3 4 5 6 7 8 9 10
IN REMOTE OUT
www.sams.rs
Made in Serbia
RSS-10v
CODE: 002.201
SN:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
RIZIK OD STRUJNOG UDARA
NE OTVARATI
UPOZORENJE
USE ONLY WITH A 250V FUSE
audio inputs
audio inputs CH1/CH2
audio inputs CH1/CH2
audio output
video inputs
video inputs
video output
video output
Analog video switcher 10x1
RSS-10v
www.sams.rs
POWER
FUSE: 500mA
AC ~230V/50Hz
IN REMOTE OUT
www.sams.rs
Made in Serbia
RSS-10a1
CODE: 002.216
SN:
AUDIO INPUT AUDIO OUTPUT
1 2 3 4 5 6 7 8 9 10
USE ONLY WITH A 250V FUSE
Buttons to select an input Panel lock
NSCU-10sg
www.sams.rs
1 2 3 4 5 6 7 8 9 10 PAN. LOCK
Remote panel 10x1 with GPI
Remote control - NSCU-10, front side
FUSE: 500mA
AC ~230V/50Hz
AUDIO INPUT CH 1 OUTPUT CH 1
+ – G+ – G + – G + – G + – G
AUDIO INPUT CH 2 OUTPUT CH 2
+ – G+ – G + – G + – G + – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
1 2 3 4 5 6 9 107 8
1 2 3 4 5 6 9 107 8
IN REMOTE OUT
USE ONLY WITH A 250V FUSE
www.sams.rs
Made in Serbia
RSS-10a2
CODE: 002.207
SN:
ELECTRICAL SHOCK HAZARD
DO NOT OPEN
CAUTION
RIZIK OD STRUJNOG UDARA
NE OTVARATI
DOK JE POD NAPONOM
UPOZORENJE
audio outputs CH1/CH2
audio outputs CH1/CH2
FUSE: 500mA
AC ~230V/50Hz
VIDEO INPUT REMOTE AUDIO INPUT CH 1OUTPUT OUTPUT CH 1
1 2 3 4 5 6 7 8 9 10
+ – G+ – G + – G + – G + – G
AUDIO INPUT CH 2 OUTPUT CH 2
+ – G+ – G + – G + – G + – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
+ – G
1 2 3 4 5 6 9 107 8
1 2 3 4 5 6 9 107 8
USE ONLY WITH A 250V FUSE
1 1
55
99
66
A0
GV-
A1
A0
A2
A3 A1
A2
A3
GV-
female male
2
3
4
7
8
2 3 4
78
Connector for Control Panel
SCU-10 (male/female) SUB D9 pin
INSTALLATION
CABLE CONNECTION BETWEEN SWITCHER AND REMOTE

RSS
Switchers
Sams elektronik d.o.o. • [email protected] • www.sams.rs
elektronik
13
REMOTE CONTROL NSCU-10
The connection to
the switcher
NOTE: If the remote control is connected to the network, changes in inputs that are made in this
way are detected by remote control.
GPI
Ethernet
GPI connector
GPI
1 - GPI 1
2 - GPI 2
3 - GPI 3
4 - GPI 4
5 - GPI 5
6 - GPI 6
7 - GPI 7
8 - GPI 8
9 - GPI 9
10 - GPI 10
11-25 - GND
GPI PINOUT
www.sams.rs
SN:
MODEL:
REMOTE
NO USER - SERVICEABLE PARTS INSIDE!
REFER SERVICING TO QUALIFIED PERSONNEL!
NETWORK
TCP/IP
MAC ADDRESS:
To find this device through network
use Sams NETFINDER software.
Download software only from
www.sams.rs

RSS
Switchers
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
14
NOTES
REMOTE CONTROL SCU-10
The connection to
the switcher