Anycall English User’s Guide
for SK Telecom subscribers 010
Getting started
Send a video message
1From the Home screen, tap Dial and enter a phone number.
2Tap Accessory.
3Tap V-Msg Call.
4Open the keypad, point the camera lens at your face and tap #to start recording.
5When you are nished recording, tap #to stop.
6Tap 1to send your video message.
Note Recipients can view video messages only if their phones support this feature.
Make a voice call
Call with a speed-dial location
You can dial a contact’s phone number by entering the corresponding speed-dial number:
For numbers stored in Phonebook locations 001-009: From the Home screen, tap Dial and
then tap and hold the key that corresponds to the last digit of the speed-dial location.
For numbers stored in Phonebook locations 000 or 010-999: From the Home screen, tap
Dial. Next, tap the key corresponds to the rst digit and then tap and hold the key that
corresponds to the last digit of the speed-dial location.
For numbers stored on a USIM card: From the Home screen, tap Dial, and then tap and
hold 0to display the plus sign (+). Next, tap the key that corresponds to the rst digit and
then tap and hold the key that corresponds to the last digit of the speed-dial location.
Call with a contact’s initials
In idle mode, you can search for a contact by entering his or her initials. To make a call with a
contact’s initials,
1From the Home screen, tap Dial.
2Tap the numerical keys that correspond to the contact’s initials.
For example, tap
ㅎ
(8),
ㄱ
(4), and
ㄷ
(6) to search for “
홍길동 .
”
3Tap the contact’s phone number and press .
To make a video call, tap the contact’s phone number and press .
Call with 4-digit dialing
In idle mode, you can search for a contact by entering the rst or last four digits of the number.
When you have located the contact’s number, press to make the call.
Redial the last number called
In idle mode, Press and hold to redial to the last number you called.
●
●
●
●
