Samsung chrono 2 User manual

1
TABLE OF CONTENTS
YOUR PHONE 3
Front View Features 3
Closed features 4
Additional Phone Features 5
Battery Installation/Removal 6
Turning Your Phone On or Off 11
PHONE FUNCTIONS 12
Setting Up Voicemail 12
Calling Features 13
Sound Settings 15
Display Settings 17
Contacts 18
Messaging 18
Bluetooth 21
Web Browsing 24
easyedge 26
Camera 29
TABLE OF CONTENTS

TABLE OF CONTENTS
2
NOTES 32

3
YOUR PHONE
NOTES 32
1. EARPIECE
2. DISPLAY
3. NAVIGATION AND
OK KEY
4. SEND KEY
5. MICROPHONE
6. VIBRATION MODE
KEY
7. CLEAR KEY
8. END KEY
9. SOFT KEYS
YOUR PHONE
FRONT VIEW FEATURES

YOUR PHONE
4
1. CAMERA LENS
2. FRONT DISPLAY
3. SPEAKER
CLOSED FEATURES

5
YOUR PHONE
1. VOLUME KEY
2. POWER/USB
PORT
3. CAMERA KEY
4. 3.5 MM HEADSET
JACK
ADDITIONAL PHONE FEATURES

YOUR PHONE
6
BATTERY INSTALLATION/REMOVAL
Your phone is powered by a rechargeable, standard
Li-Ion battery. A charger is included with the phone,
for charging the battery.
NOTE: Although the battery comes partially charged, you must fully
charge this battery before using your phone for the first. A fully
discharged battery requires up to 4 hours of charge time.
WARNING: Use only Samsung-approved charging devices and
batteries. Samsung accesories are designed to maximize
battery life. using other accessories may invalidate your
warranty and may cause damage.
Installing the Battery
1. Hold the device firmly and locate the cover
release latch.
2. Place your fingernail in the opening and firmly
“pop” the cover off the device (1).
3. Insert the top end of the battery into the phone
housing (2), aligning the gold contacts on the
battery with those in the battery compartment.
4. Push down on the bottom of the battery down
until it snaps into place (3).

5. Replace the battery cover by sliding it back into
place and snapping the edges securely at all
four corners.
1
Battery Insertion Battery Removal
7
YOUR PHONE

YOUR PHONE
8
Removing the Battery
1. Hold the device firmly and locate the cover
release latch.
2. Place your fingernail in the opening and firmly
“pop” the cover off the device (1).
3. Place your finger into the battery removal slot
(4) and lift the battery out of the compartment.
4. Replace the battery cover by sliding it back into
place and snapping the edges securely at all
four corners.

9
YOUR PHONE
Charging Your Battery
Your phone comes with a charger to rapidly charge
your phone from any 120/220 VAC outlet.
NOTE: Although the battery comes partially charged, you must fully
charge this battery before using your phone for the first.
1. Plug the charging head into a standard AC
power outlet.

YOUR PHONE
10
2. Insert the USB cable into the port at the base
of the phone.
3. Once complete, unplug the charging head from
the power outlet and remove the USB cable
from the phone.
+
INCORRECT

11
YOUR PHONE
TURNING YOUR PHONE ON OR OFF
XPress and hold (End/Power) until the
phone turns on or off.

PHONE FUNCTIONS
12
SETTING UP VOICEMAIL
Voicemail allows callers to leave voice messages,
which can be retrieved any time.
NOTE: Once your Voicemail account has been properly set up, you can
use the Voicemail folder (under the Messages menu) to view
details for your current voicemail messages.
1. In standby mode, press and hold or dial
your own mobile number to dial Voicemail.
2. Follow the prompts in the new user tutorial to
setup your mail box.
Listening to Your Voicemail
1. In standby mode, press and hold or dial
your own mobile number to dial Voicemail.
After connection, you will hear your voice
greeting.
2. When prompted, enter your password.
PHONE FUNCTIONS

13
PHONE FUNCTIONS
CALLING FEATURES
Making a Call
1. In standby mode, press the digits of the
telephone number to call using the keypad and
press (Send).
IMPORTANT: Remember to include necessary long distance codes.
Ending a Call
XPress (End/Power) to end a call.
Answering a Call
XPress (Send) to answer an incoming call.
Call Waiting
This feature allows you to receive new inbound calls
while in an active call.
1. Press (Send) to place the current call on
hold and answer the new call.
2. Press (Send) again to return to the first
call.

PHONE FUNCTIONS
14
Making a Three-way Call
Three-way calling is similar to a conference call with
a total of three people (including yourself). Make a
call to two numbers and connect them together on
your phone using three-way calling.
1. In standby mode, enter the number for the first
caller on your dialpad, then press (Send).
2. Once connected to the first caller press
(Send) to place the first caller on hold and
begin your second call.
3. Enter the second party’s phone number and
press (Send).
4. Once the second party answers, press
(Send) to connect all three parties.
Using the Speakerphone
XDuring a call, press (SPK) to switch
between the earpiece and the speakerphone.

15
PHONE FUNCTIONS
SOUND SETTINGS
The following information describes how to adjust
the volume levels on your phone and assign a new
ringtone.
Adjusting the Volume
1. In standby mode, press the (Volume key) up
or down .
Activating/Deactivating Vibrate Mode
1. Press the Volume key down until Vibrate
appears in the display.
2. Press the Volume key up to resume Normal
mode.

PHONE FUNCTIONS
16
Assigning Ringtones
1. In standby mode, press (Menu) g
Settings gSound Settings gRinger Type
gVoice Calls.
2. Highlight a ringtone and press (Play) to
play the selected ringtone. Press again to stop
playback.
3. Press to set the highlighted ringtone as
your new call sound.

17
PHONE FUNCTIONS
DISPLAY SETTINGS
Changing the Wallpaper
1. In standby mode, press (Menu) g
Settings gDisplay Settings gWallpaper
gMain Display/Front Display.
2. Highlight a preloaded wallpaper from Preset
Images or a photo you’ve taken from My
Images and press .
MAIN DISPLAY FRONT DISPLAY

PHONE FUNCTIONS
18
CONTACTS
Creating a Contact
In standby mode, press (Contacts) g
(Options) g New Contact genter your
information and press (Save) to save.
MESSAGING
Accessing Messaging
XIn standby mode, press (Messages).
– or–
XIn standby mode, press (Menu) g
Messages.

19
PHONE FUNCTIONS
Create and Send a Text Message
1. In standby mode, press (Messages) g
Send Message gText Message.
2. Manually enter the destination address(es).
Press (Add) to select available recipients
from either From Contacts, Groups or Recent
Calls.
NOTE: When manually entering a contact, if the contact is stored in
your Contact List, you will see a list of partially matched names
in the drop down box.
3. Scroll to the Text field and enter your
message.
4. Press (Send) to send.
NOTE: Text Messages are charged in accordance with your Messaging
Plan.

PHONE FUNCTIONS
20
Create and Send a Picture Message
NOTE: You can send a Picture message to up to ten recipients. Enter
each recipient’s address or phone number in a separate Send
To field of the Picture message composer.
1. In standby mode, press (Messages) g
Send Message gPicture Message.
2. Manually enter the destination address(es).
Press (Add) to select available recipients
from either From Contacts, Groups, Recent
Calls or OnlineAlbum.
NOTE: When manually entering a contact, if the contact is stored in
your Contact List, you will see a list of partially matched names
in the drop down box.
3. Scroll down to the Subject field to enter a
subject.
4. Scroll down to the Text field and enter your
text.
5. Scroll down to the Picture field and press
(Picture) and select a picture from the gallery
or press (Camera) to capture a picture to
send using the camera function.