Samsung Galaxy Z Flip3 5G User manual

Quick Start Guide
October 2021, 1st Edition
Imported by: SAMSUNG ELECTRONICS JAPAN Co., Ltd.
Manufactured by: Samsung Electronics Co., Ltd.
For detailed descriptions on various
functions, scan the QR code on the right
side or use the "オンラインマニュアル
(Online Manual)" (Japanese) on your
product with the following operations.
On the home screen, flick up → [Galaxy]
→ [取扱説明書 (Online Manual)]
"オンラインマニュアル
(Online Manual)" (Japanese)
Cell phone and PHS operators collect and recycle unused
telephones, batteries and battery chargers at stores bearing
the logo regardless of brand and manufacturer to protect
the environment and reuse valuable resources.
SCG12
List of Packaged Items
• Main unit (Protective lm (sample) attached)
• SIM card removal tool (sample)
• USB cable (CtoC) (sample)
• クイックスタートガイド (Quick Start Guide)
(Japanese)
• ご利用にあたっての注意事項 (Notes on Usage)
(Japanese)
• データ移行用試供品取扱説明書 (Sample for data
transfer Manual) (Japanese)
◎Please use a specied charging equipment (sold
separately).
◎The battery is built into the product.
◎Illustrations used in this manual are just images for
explanations. They may be di󰀨erent from actual ones.
◎Do not fold the product in the reverse direction.
That may cause the product to get damaged.
◎When folding the product, do not place any objects,
such as cards, coins, or keys, on the main display.
The display may be damaged.
◎The protective lm (sample) attached to the main
display is for the product only. For protecting the
main display, do not remove the protective lm
(sample). Doing so might cause the product to
break or damage.
◎The product is not dustproof. Do not put ne
particles such as sand into the device.
• For the latest information, please refer to the "取扱
説明書 詳細版 (Full Instruction Manual)" (Japanese),
available on the homepage of the contracted carrier.
• For the latest information of the product, refer to
the following website.
https://www.galaxymobile.jp/ (Japanese)
• The contents described in this manual may be di󰀨erent
due to the version upgrade of the software of this
product or the change / end of service. And the content
of this manual is subject to change without notice.
Attaching SIM Card
Notch
IC (metal)
part
b
d
c
a
SIM card removal tool
(sample)
Turning the Power On
a Press and hold for over 2 seconds
b
Unlock the screen
(Side key)/
Fingerprint recognition sensor
◎Press and hold (Side key)/Fingerprint recognition
sensor and lower side of Volume key simultaneously
for over 7 seconds, when the power cannot be
turned o󰀨 in the usual way or the screen freezes.

a
e
f
d
b
c
g
k
h
i
j
q
p
s
q
q
v
t
r
u
ml n
《Top side》
《Bottom side》
《Front side》《Left side》 《Right side》
《Rear side》
d
d
d
d
d
d
o
a Mouthpiece/Microphone (upper)*1
b Tray eject hole
c SIM card tray
d Magnet part*2*3
e Front camera*4
f Proximity/Light sensor*5
g Main display (touch panel)*4*6*7*8
h Receiver/Speaker*1*9
i Volume key
j (Side key)/Fingerprint recognition sensor
k Vent hole*1
l Mouthpiece/Microphone (lower)*1
m USB Type-CTM connection terminal (external
connection terminal)
n Speaker*1
o Rear camera*4
p Flash/Light
q 5G/4G antenna part*10
r Wireless charging position
s 4G antenna part*10
t 5G/4G/GPS/Wi-Fi®/Bluetooth®antenna part*10
u Cover display (touch panel)*4
v mark
*1 Be careful to not cover over with your ngers, etc.,
while relevant functions are being used. In addition, do
not insert the SIM card removal tool (sample) into the
product since this might cause damage.
*2 The product contains magnets, which may a󰀨ect
medical devices, such as pacemakers or implantable
cardioverter debrillators. If you are using any of these
medical devices, keep your device a safe distance
from them and consult with your physician before you
use the device.
*3 Keep a safe distance between your device and objects
that are a󰀨ected by magnets. Objects such as credit
cards, passbooks, access cards, boarding passes, or
parking passes may be damaged or disabled by the
magnets in the device.
*4 Do not press with a hard or sharp object, such as a pen
or your ngernail. Doing so could result in scratching or
puncturing them.
*5 Do not cover with the sticker, etc. Functions may not
work correctly.
*6 A protective lm (sample) is already attached to the
display.
*7 The product's main display has a crease in the center
of it, but this is the product's normal state.
*8 Do not attach adhesives, such as lms or stickers, to
the main display.
*9 The product uses it for both a receiver and a speaker.
*10 The antenna is built into the main unit. Covering
around the antenna by hand may a󰀨ect calling quality/
communication quality.
Names of Parts