Samsung GT-S8300 User manual

SAMSUNG Proprietary-Contents may change without notice
7. Disassembly and Assembly Instructions
7-1
This Document can not be used without Samsung's authorization
1) Unscrew the 4points.
2) Separate the REAR from the FRONT ass'y
11) Unscrew the 3points.
2) Disassemble the key FPCB from connector.
2
31) Disassemble the slide F-CPB with the
conenctor.
2) Seprete PBA from the slide ass'y.
41) Detach Screw Cap 2EA
2) Unscrew the 2points.
②
①
※Caution
1) Be care of scratch and molding damage.
※Caution
1) Be care of damage to KEY F-CPB.
※Caution
1) Be care of damage to slide F-CPB
※Caution
1) Be care of scratch and molding damage.
7-1. Disassembly

SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
7-2
This Document can not be used without Samsung's authorization
5 6
7 8
1) Separate the BACK COVER from the slide
ass'y
1) Unscrew the 6points.
2) Separate the LOWER case from the UPPER
case.
1) Disassemble the Upper Deco from the
Upper. 1) Remove Black tape.
2) Disassemble the slide F-PCB from the sub
PCB.
※Caution
1) Be care of scratch and molding damage.
※Caution
1) Be care of scratch and molding damage.
2) Be care of damage to slide F-CPB.
※Caution
1) Be care of scratch and molding damage.
2) Be care of damage to the slide F-CPB.
3) Be care of damage to the connector.
※Caution
1)Be care of damage to Slide F-PCB.

SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
7-3
This Document can not be used without Samsung's authorization
1) Disassemble the Camera Module F-PCB
2) Sperate the LCD module from the UPPER
case.
91)Disassemble the LCD module on the UPPER
case.
10

SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
7-4
This Document can not be used without Samsung's authorization
1 2
3 4
1)Assemble the LCD module on the UPPER
case
1) Asassemble the Camera Module F-PCB
2) Place the LCD module
1) Assemble the slide F-PCB to the sub PCB.
2) Attach Black tape.
1) Assemble the Upper Deco to the Upper
※Caution
1) Be care of scratch to main WINDOW.
※Caution
1)Be care of damage to Camera F-PCB.
※Caution
1)Be care of damage to Slide F-PCB.
※Caution
1) Be care of scratch and molding damage.
2) Be care of damage to the slide F-CPB.
3) Be care of damage to the connector.
②
①
①
②
7-2. Assembly

SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
7-5
This Document can not be used without Samsung's authorization
5 6
7 8
1) Pass FPCB to LCD FPCB hole
2) Assemble HOOK of SIDE surface
depending
on LOWER top.
1) Assemble the BACK COVER to the slide
ass'y
1) Screw the 2points.
2) Attach Screw Cap.
1) Connect the slide F-PCB &PBA ass'y.
①
②
※Caution
1) Be care of scratch and molding damage.
2) Be care of damage to slide F-CPB.
※Caution
1) Be care of scratch and molding damage.
※Caution
1) Be care of scratch and molding damage.
※Caution
1) Be care of damage to slide F-CPB

SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly Instructions
7-6
This Document can not be used without Samsung's authorization
910
1) Place the PBA ass'y on the FRONT case
stably, Screw the 4points.
2) Assemble the KEY F-CPB with the
conenctor.
1) Assemble the REAR to the FRONT ass'y
2) Screw the 4points.
※Caution
1) Be care of damage to KEY F-CPB.
※Caution
1) Be care of scratch and molding damage.
①
②