Samsung UF-130DX Safety guide

Samsung Digital Presenter
Software User’s Guide
UF-130DX/ST
SAMSUNG TECHWIN

i
Contents
Installing Samsung Digital Presenter Software········································ 1
System requirements·································································································· 1
Installing software ······································································································· 2
Connecting Samsung Digital Presenter to PC······················································ 2
Installing USB driver ····························································································· 3
Installing Samsung Digital Presenter program ····················································· 6
Installation tips ············································································································ 8
How can I determine if my computer’s USB port is enabled ?······························ 8
How do I remove the USB driver and Samsung Digital Presenter program ? ······ 9
Running Samsung Digital Presenter Program ······································· 10
Samsung Digital Presenter View Panel overview ····················································· 11
Samsung Digital Presenter Control Panel overview ················································· 15
Capturing/Saving/Printing images············································································· 17
Quick Save([F2] key) ································································································ 20
Using Samsung Digital Presenter TWAIN Driver··································· 21
Scanning Images ······································································································ 23
Keyboard Map ·········································································································· 24
Using Samsung Digital Presenter AVI Capture ····································· 25
Troubleshooting ····················································································· 29

1
Installing Samsung Digital Presenter Software
After connecting Samsung Digital Presenter with computer, you can save the image into the
computer and print it. You can control Samsung Digital Presenter on the PC.
After installing Samsung Digital Presenter program with a CD provided together with the
product, you may connect both computer and digital presenter with USB cables for use.
System requirements
To install the Samsung Digital Presenter software, your computer must have at least the
following system configuration :
yPentium 4 1GHz or higher processor(Pentium 4 1.3GHz or higher recommended)
(Case AVI Capture : Pentium 4 2GHz or higher. Don’t run other programs, when you
capture AVI files)
yWindows 2000 or later
- List of supported windows: Windows 2000/Windows XP/Windows Vista
yRAM: 256MB or higher RAM(512MB or higher recommended)
yUSB 2.0 interface connector
yDisplay : XGA(1024 x 768), 65536 colors or higher
- Video RAM 256MB or higher recommended
- SXGA or higher recommended
yCD-ROM drive
✔ Note : •USB 2.0 PCI Cards or USB 2.0 PCMCIA Cards are not formally supported.
•It cannot perform at regular speed when you use PCI/PCMCIA type USB
2.0 card.

2
Installing software
To install the software
1. Connect your Samsung Digital Presenter to the PC with USB cable. See the current page.
2. Install the USB driver. See page 3
3. Install the Samsung Digital Presenter control program. See page 6.
Follow the instructions below to complete the installation:
Connecting Samsung Digital Presenter to PC
1. Make sure that both the Samsung Digital Presenter and a computer are turned on.
2. Plug one end of the USB cable into the USB port on the Samsung Digital Presenter.
3. Plug the other end into the USB port on the computer.
✔ Caution : •We recommend to connect to USB port which is attached on computer
main board. (It can make troubles in extended front-side USB port or
USB hub without power depending on computers.)
You have to connect Pc to Samsung Digital Presenter using USB cable
within 4 meters.

3
Installing USB driver
1. The Add New Hardware Wizard dialog box appears. (Case of Windows Vista)
2. After selecting first option, you can watch the question about connecting Windows update
sites, and you should select the third option ‘Don’t search online’.

4
3. Click “Browse my computer for driver software(advanced)”.
4. Insert the SAMSUNG program CD into your CD-ROM drive, then put a checkmark on the
CD-ROM drives box and Include this location in the search box then type x:\ (where x is the
drive letter for the CD-ROM drive). Click Next.

5
5. Install the driver, select the Second option ‘Install this driver software anyway’.
6. Click Finish. The USB driver will be inserted.

6
Installing Samsung Digital Presenter program
1. Insert the Samsung Digital Presenter Program CD in a CD-ROM drive and the install
program will be auto-run. And then select ENGLISH.Click Next.
2. The InstallShield Wizard window opens.
3. You can select components you want to install.
4. Choose installing MPEG-4 Video Codec for compressing AVI file in UF130 AVI Capture
Program. If you do not install MPEG-4 Codec, You cannot compress AVI file. We
recommend to install codec.

7
5. After installing Samsung Digital Presenter Program, you can watch the dialog.
If you want to use AVI Capture program, follow this path.
[Start] -> [Programs] -> [UF130 USBViewer] -> [UF130 AVI Capture] and click UF130 AVI
Capture icon.
6. After the Samsung Digital Presenter software is properly installed, you can see the
Samsung Digital Presenter icon in the [Start] Menu and the desktop and Software manual
shortcut in the [Start] Menu.

8
Installation tips
How can I determine if my computer’s USB port is enabled ?
1. We will explain by Windows Vista. Please find the Device Manager in other Windows
version for yourself.
2. Select Control Panel →System →Device Manager
3. If you see USB host controllers and a USB root hub listed, USB interface is properly
enabled.
4. If you see USB Enhanced Host controller listed, USB 2.0 mode is properly enabled.