Samsung SRD-830 User manual

8 CHANNEL/8 CHANNEL/
16 CHANNEL DVR16 CHANNEL DVR
User ManualUser Manual
SRD-830/830D/1610/1610D/1630/1630DSRD-830/830D/1610/1610D/1630/1630D
SRD-850/850D/1650/1650DSRD-850/850D/1650/1650D
SRD-870/870D/1670/1670DSRD-870/870D/1670/1670D

2_2_
overviewoverview
FEATURESFEATURES
The SRD The SRD
DVR empDVR emp
loys Hloys H
.264 vid.264 vid
eo encodeo encod
ing for ing for
8 or 16 8 or 16
channel channel
inputs inputs
and G.7and G.7
23 audi23 audi
o encodo encod
ing for ing for
4 or 164 or 16
channels while simultaneously supports hard disc recording and playback.channels while simultaneously supports hard disc recording and playback.
These DThese D
VRs alVRs al
so supso sup
ports ports
network network
connecticonnecti
vity, pvity, p
rovidinrovidin
g remote g remote
monitormonitor
ing froing fro
m a remom a remo
te PC tte PC t
ransferransfer
ring viring vi
deodeo
and audio data.and audio data.
Provides convenient User InterfaceProvides convenient User Interface
8/16 CH Composite Input Connectors8/16 CH Composite Input Connectors
Supports CIF(S)/2CIF(M)/4CIF(L) recording formatsSupports CIF(S)/2CIF(M)/4CIF(L) recording formats
With the network specific codec, network transfer enabled regardless of the recording conditionsWith the network specific codec, network transfer enabled regardless of the recording conditions
De-interlacing processor for better picture qualityDe-interlacing processor for better picture quality
HDMI enabling superior picture output qualityHDMI enabling superior picture output quality
Display of HDD information and status by using HDD SMARTDisplay of HDD information and status by using HDD SMART
4CIF Size Recording in 480 (NTSC)/400 (PAL) IPS speed (SRD-1670/1670D)4CIF Size Recording in 480 (NTSC)/400 (PAL) IPS speed (SRD-1670/1670D)
CIF(S) Size Recording in 480 (NTSC)/400 (PAL) IPS speed (SRD-1650/1650D/1670/1670D)CIF(S) Size Recording in 480 (NTSC)/400 (PAL) IPS speed (SRD-1650/1650D/1670/1670D)
CIF(S) Size Recording in 240 (NTSC)/200 (PAL) IPS speed (SRD-850/850D/870/870D/1630/1630D)CIF(S) Size Recording in 240 (NTSC)/200 (PAL) IPS speed (SRD-850/850D/870/870D/1630/1630D)
CIF(S) Size Recording in 120 (NTSC)/100 (PAL) IPS speed (SRD-830/830D/1610/1610D)CIF(S) Size Recording in 120 (NTSC)/100 (PAL) IPS speed (SRD-830/830D/1610/1610D)
8/16-channel Loop Through Video port connection8/16-channel Loop Through Video port connection
Hard Disk overwrite functionHard Disk overwrite function
Mass storage hard disk backup through high-speed USB 2.0Mass storage hard disk backup through high-speed USB 2.0
Mass storage hard disk backup through eSATA (SRD-850/850D/870/870D/1650/1650D/1670/1670D)Mass storage hard disk backup through eSATA (SRD-850/850D/870/870D/1650/1650D/1670/1670D)
Backup function using USB 2.0 flash memory and external CD/DVD writerBackup function using USB 2.0 flash memory and external CD/DVD writer
(Internal DVD writer is not available for SRD-830/850/870/1610/1630/1650/1670)(Internal DVD writer is not available for SRD-830/850/870/1610/1630/1650/1670)
Simultaneous Record and Playback of 8/16-channel video dataSimultaneous Record and Playback of 8/16-channel video data
Various Various
Search Search
Modes (Modes (
Search Search
by Time, by Time,
Event, BEvent, B
ackup, ackup,
POS and POS and
Motion Motion
DetectionDetection
))
Various Various
RecordRecord
ing Moding Mod
es (Times (Tim
e Lapsee Lapse
, Event, , Event,
ScheduSchedu
led Recled Rec
ording)ording)
Extended Hard Disk Connection (USB 2.0, eSATA) (SRD-850/850D/870/870D/1650/1650D/1670/1670D)Extended Hard Disk Connection (USB 2.0, eSATA) (SRD-850/850D/870/870D/1650/1650D/1670/1670D)
Alarm IAlarm I
nterfacenterface
Remote Monitoring function by Windows Network ViewerRemote Monitoring function by Windows Network Viewer
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
overviewoverview

EnglishEnglish
_3_3
��
OO
VV
EE
RR
VV
II
EE
WW
IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit.Read these operating instructions carefully before using the unit.
Follow all the safety instructions listed below.Follow all the safety instructions listed below.
Keep these operating instructions handy for Keep these operating instructions handy for
future reference.future reference.
Read these Read these
instructions.instructions.
Keep these instructions.Keep these instructions.
Heed all warnings.Heed all warnings.
Follow all instructions.Follow all instructions.
Do not use this Do not use this
apparatus near water.apparatus near water.
Clean only with dry cloth.Clean only with dry cloth.
Do not block any Do not block any
ventilation openingsventilation openings
, Install in , Install in
accordance with the manufacturer’saccordance with the manufacturer’s
instructions.instructions.
Do not install near any Do not install near any
heat sources such as radiators, heat registers, stoves, or otherheat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of Do not defeat the safety purpose of
the polarized or grounding- type plug. the polarized or grounding- type plug.
A polarized plug hasA polarized plug has
two blades with one wider than the other. A two blades with one wider than the other. A
grounding type plug has two blades and a thirdgrounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. if the grounding prong. The wide blade or the third prong are provided for your safety. if the
providedprovided
plug does not fit plug does not fit
into your outlet, consult an electrician for replacement of the into your outlet, consult an electrician for replacement of the
obsolete outlet.obsolete outlet.
Protect the power cord from Protect the power cord from
being walked on or being walked on or
pinched particularly at plugs, conveniencepinched particularly at plugs, convenience
receptaclesreceptacles
, and the , and the
point where they exit from point where they exit from
the apparatus.the apparatus.
Only use Only use
attachmentsattachments
/accesso/accesso
ries specified by ries specified by
the manufacturer.the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by theUse only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, usemanufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury fromcaution when moving the cart/apparatus combination to avoid injury from
tip-over.tip-over.
Unplug this apparatus during lightning storms or when Unplug this apparatus during lightning storms or when
unused for longunused for long
periods of time.periods of time.
Refer all servicing to qualified service personnel. Servicing is Refer all servicing to qualified service personnel. Servicing is
required when the apparatus hasrequired when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has beenbeen damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain orapparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been moisture, does not operate normally, or has been
dropped.dropped.
1)1)
2)2)
3)3)
4)4)
5)5)
6)6)
7)7)
8)8)
9)9)
10)10)
11)11)
12)12)
13)13)
14)14)

4_
overview
overview
BEFORE START
This
user
manua
l pro
vides
Infor
matio
n for
using
the DV
R suc
h as
brief
intro
ductio
n, pa
rt nam
es, fu
nctio
ns, c
onnec
tion
to other equipment, menu setup, etc.
You ha
ve to kee
p in mi
nd the
followi
ng noti
ces :
SAMSUNG retains the copyright on this manual.
This m
anual ca
nnot be
copied
without
SAMSUN
G’s pri
or writ
ten app
roval.
We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of
instructions mentioned in this manual.
Prior to opening the case, please
consult a qualified technician first.
Whenever this is needed p
ower must be
removed from the unit.
Before installing an additional HDD or connecting an external storage device (USB memory or USB HDD) to this
DVR, check the compatibility. Consult your provider for the compatibility list.
Warning
Battery
It is essential that when changing the battery in the unit, the replacement battery must be of the same type
otherwise there may be a possibility of an explosion.
The fol
lowing
are the s
pecificat
ions of
the batt
ery you
are usi
ng now
.
Normal voltage : 3V
Normal capacity : 170mAh
Continuous standard load : 0.2mA
Operating temperature : -20°C ~ +85°C
(-4°F ~ +185°F)
Connect the power cord into a grounded outlet.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
System Shutdown
Turnin
g off
the powe
r while
the pro
duct is
in ope
ration,
or und
ertaking
improp
er action
s may c
ause da
mage
or malfunction to the hard drive or the product.
Please turn off the power using the Power button on the front of your DVR.
After s
electing
<
OK
> in the pop-up menu, you can pull off the power cord.
You ma
y want to
install
a UPS
system
for saf
e opera
tion in
order
to preve
nt damag
e caused
by an
unexpected power stoppage. (Any questions concerning UPS, consult your UPS retailer.)
Operating Temperature
The gua
ranteed
operatin
g temper
ature ran
ge of th
is pro
duct is
0°C ~
40°C (32
°F ~ 10
4°F).
This p
roduct
may not
work p
roperly
if you
run rig
ht after
a long p
eriod o
f storag
e at a tem
peratur
e below
the
guaranteed one.
Prior to using a device that has been stored for a long period in low temperatures, allow the product to stand
at room temperature for a period.
Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C (41°F ~ 131°F).
Likewise, the hard drive may not work at a temperature below the guaranteed one.
Ethernet Port
This e
quipme
nt is i
n door
use an
d all th
e commun
ication w
irings
are limi
ted to in
side o
f the b
uildin
g.
•
•
•
•
•

•
•
•
•
J
�
�
�



CALIFORNIA USA ONLY
This Perchlorate
warning applies
only to
primary CR
(Manganese Dioxide)
Lithium coin cells in the product sold or distributed ONLY in California USA.
“Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

English
_5
�
O
V
E
R
V
I
E
W
Standards Approvals
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Package Contents
Please unwrap the product, and place the product on a flat place or in the place to be installed.
Please check the following contents are included in addition to the main unit.
R
e
m
o
t
e
C
o
n
t
r
o
l
M
o
u
s
e
P
o
w
e
r
C
a
b
l
e
Network Viewer Software /
User Manual CD
U
s
e
r
M
a
n
u
a
l
R
e
m
o
t
e
C
o
n
t
r
o
l
B
a
t
t
e
r
y
(
A
A
A
)
SATA Cable
(SRD-830D/850D/870D/1610D/
1630D/1650D/1670D : 4EA)
(SRD-830/850/870/1610/1630/
1650/1670 : 5EA)
Audio
Extensio
n Cabl
e (optio
nal)
(SRD-850/850D/870/870D/
1650/1650D/1670/1670D)
HDD Fixing Screw
(SRD-830D/850D/870D/1610D/1630D/
1650D/1670D : 16EA)
(SRD-830/850/870/1610/1630/1650/
1670 : 20EA)
B
r
a
c
k
e
t
F
i
x
i
n
g
S
c
r
e
w
(
4
E
A
)
B
r
a
c
k
e
t
R
a
c
k 
For models that are not equipped with the HDD, one SATA cable is provided for HDD installation.
M
�
M
�

6_
overview
overview
CONTENTS
OVERVIEW
2
2
 Features
3
Important
Safety
Instructions
4
Before
Start
8
Part
Names
and
Functions
(Front)
10
Part
Names
and
Functions
(Rear)
13
Remote
Control
INSTALLATION
15
15
Checking
the
installation
environment
16
Rack
Installation
16
HDD
Addition
CONNECTING WITH
OTHER DEVICE
20
20
Connecting
the
Video,
Audio,
and
Monitor
20
Connecting
the
USB
21
Connecting
External
SATA
HDD
21
Connecting
POS
Device
21
Connecting
the
Alarm
Input/Output
22
Connecting
the
RS-485
Device
23
Connecting
the
Network
LIVE
25
25
Getting
Started
27
Live
Screen
Configuration
31
Live
Mode
33
Spot
Out
34
 Zoom
34
Audio
ON/OFF
34
 Freeze
35
Event
Monitoring
USING THE DVR
36
36
System
Setup
46
Setting
the
Device
54
Setting
the
Recording
57
Setting
the
Event
60
 Backup
61
Network
Configuration
68
Controlling
a
PTZ
device

English
_7
�
O
V
E
R
V
I
E
W
SEARCH & PLAY
70
70
 Search
73
 Playback
WEB VIEWER
75
75
Introducing
Web
Viewer
76
Connecting
Web
Viewer
77
Using
Live
Viewer
83
Using
Search
Viewer
87
Viewer
Setup
97
 About
BACKUP VIEWER
98
98
SEC
Backup
Viewer
APPENDIX
100
100
Product Specifi
cation (SRD-83
0/830D/16
10/
1610D/1630/1630D)
103
Product Specifi
cation (SRD-85
0/850D/87
0/
870D/1650/1650D/1670/1670D)
106
Product
Overview
107
Default
Setting
110
 Troubleshooting

20_
connecting with other device
The following figures are based on Model SRD-1670D.
CONNECTING THE VIDEO, AUDIO, AND MONITOR
CONNECTING THE USB
By factory default, a USB port is provided for external connection.
You can
connect
a USB H
DD, US
B CD/D
VD play
er, USB
memory o
r mous
e to the
USB p
ort.
If a USB HDD
is connected to the system, recognition and settings are available in
“
Menu
>
Setting the Device
>
Storage Device
”. (Page 48)
This p
roduct
suppo
rts hot
-pluggi
ng, wh
ich conn
ects/rem
oves th
e USB d
evice du
ring th
e syste
m opera
tion.
If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.
M
�
1.
2.
3.
4.
J
�
connecting with other device
VIDEO I
N
AUDIO IN
S
P
O
T
A
C
1
0
0
-
2
4
0
V
~
I
N
VIDEO
OUT
(VGA)
VIDEO
OUT
(composite)
AUDIO O
UT
HDMI
VIDEO
IN

English
_21
�
C
O
N
N
E
C
T
I
N
G
W
I
T
H
O
T
H
E
R
D
E
V
I
C
E
CONNECTING EXTERNAL SATA HDD
The external SATA connection port is not available in SRD-830/830D/1610/1610D/1630/1630D.
Two exte
rnal SA
TA por
ts are p
rovide
d on th
e rear p
anel by
factory
default
.
If connected to the system, the external SATA HDD can be recognized and configured in “
Menu
>
Device
>
Storage Device
”.
The DVR
suppo
rts Ho
t Plug
function
to allow
connectio
n and
discon
nection
of SAT
A HDD
devices
while t
he
system is in use.
Only one SATA HDD can be connected to an external SATA port.
Use a cable shorter than 1 m for the external SATA HDD connections.
CONNECTING POS DEVICE
You can
connect
a POS d
evice to
the RS-
232C p
ort on t
he prod
uct’s r
ear sid
e when
you con
nect it d
irectly
with
a RS-232C cable.
Connection setup for the RS-232C port is available in “
Menu
>
Device
>
POS Devices
”, press the
<
POS Device Setup
> button and set <
Baudrate, Parity, Data, Stop bit and Transfer Type
>. (Page 51)
CONNECTING THE ALARM INPUT/OUTPUT
The Al
arm In/O
ut por
t at the b
ack is c
omposed
of the
followi
ng.
Alarm I
n Port
for SR
D-830/83
0D/850/8
50D/870/8
70D
Alarm I
n Port
for SR
D-1610/1
610D/163
0/1630D/
1650/1650
D/
1670/1670D
Alarm Ou
t Port
M
�
1.
2.
3.
J
�
�
1.
2.
1.
2.
3.

22_
connecting with other device
connecting with other device
ALARM
IN 1 ~
8 (SRD-
830/830D
/850/850D
/870/870
D) : Al
arm Inp
ut Port
ALARM
IN 1 ~
16 (SRD
-1610/16
10D/1630
/1630D/16
50/1650D
/1670/16
70D) : A
larm In
put Po
rt
ALARM
RESET :
On recei
ving an
Alarm R
eset si
gnal, th
e syste
m cancels
the curr
ent Alar
m Inpu
t and r
esumes
sensing.
ALARM
OUT 1 ~
4 : Alar
m Outpu
t Port
CONNECTING THE RS-485 DEVICE
Connect the RS-485 device through the back port.
You can
connec
t and co
ntrol th
e PTZ ca
mera wh
ich sup
ports the
RS-485
commun
icatio
n.
Transf
er Type
: You m
ay selec
t either
Half D
uplex
or
Full Duplex as the data transfer type.
Baud Rate : Supported Baud rates are 600/1200/
2400/4800/9600/19200/38400.
Check if the RS-485 device is compatible with the
product first.
Pay attention not to change the polarity (+/–) of the
RS-485 device when connecting it.
Depending on camera’s type, connection polarity can be
different.
For further information, refer to the respective PTZ
Camera’s documentation.
Ex : DVR(TX+/–)

SCC-C6433,35(RX+/–)
DVR(TX+/–)

SCC-C6403,07(TX+/–)
•
•
•
•
M
�
•
•
M
�
�
�
�
ALAR
M OU
T
ALARM
IN
ALARM
IN
PTZ device
Half Duplex Type
Data
(–)
Data
(+)
Full Duplex Type
 Rx(+)
 Rx(–)
 Tx(–)
 Tx(+)
Rear
Tx(–)
Tx(+)
Rx(–)
Rx(+)

English
_23
�
C
O
N
N
E
C
T
I
N
G
W
I
T
H
O
T
H
E
R
D
E
V
I
C
E
CONNECTING THE NETWORK
Connecting to Internet through Ethernet (10/100/1000BaseT)
Connecting to the Internet using the
router
Router
xDSL or Cable
Modem
xDSL or Cable
Modem
External Remote
PC
DDNS Server
(Data Center)
INTERNET
Windows
Network Viewer
Back Bone
Hub/Switcher
Hub/Switcher
RJ-45 Ethernet Cable
(Direct Cable)
INTERNET

English
_27
�
L
I
V
E
LIVE SCREEN CONFIGURATION
Icons on the Live Screen
You can
check th
e status
or oper
ation of
the DVR
with the
icons
on the l
ive scr
een.
N
a
m
e
D
e
s
c
r
i
p
t
i
o
n
Current Date, Time
Displays the current time and date.
Login Information
When you are logged in, the “
LOG ON
” icon will be displayed.
Screen Mode
Displayed if the zoom function is activated.
Displayed if you press the Pause button.
Displayed in Auto Sequence mode where all channels are switched at the
specific time interval.
Displayed if the recording is in process.
M
To cancel the recording, enter the password.
System Operation
Displayed if there is a problem with the cooling fan.
Displayed if the HDD is full and the DVR has an insufficient space to record.
Displayed if no HDD is installed or the existing HDD should be replaced.
Displayed if the HDD needs a technical examination.
Displayed if a new firmware is found from the network.
Vid
eo In
put
Stat
us
Displayed if no input is entered in the condition that the camera is set to <
ON
>.
Nothing will be displayed on the screen if the camera is set to <
OFF
>.
Camera Name/ Channel
Displays the camera name and the changed channel, if any.
Camera Operation
Displays the resolution of the recording screen. (Page 56)
Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.
Displays AUDIO ON/MUTE.
Not displayed in video mode if deactivated.
If the sensor is set to <
ON
>, the input signal will be displayed on the screen of
the connected channel.
Displayed if a motion detected in the condition that the motion detection is set to
<
ON
>.
Displays the current record mode from Record/Event/Schedule.
2010-01-01 00:00:01
CAM 01

28_
live
live
Error Information
If th
e int
erna
l HDD
is no
t con
nect
ed, th
e “NO H
DD”
(
) mes
sag
e will
app
ear; i
f the
re oc
curs
a pro
ble
m,
you w
ill s
ee th
e “HD
D FAI
L”(
) mes
sage
in th
e top l
eft co
rne
r. In t
his c
ase
, mak
e sur
e you c
onta
ct th
e
service center for assistance as this may cause a failure of recording, playback or backup.
If the cooling fan does not work properly or has a problem, the <
Fan Information
> window will appear and
the fa
n erro
r icon (
) will b
e dis
play
ed on th
e top le
ft cor
ner
. In thi
s case
, chec
k to see i
f the in
tern
al fan
works.
As a fa
n error
can sho
rten the
produc
t life,
make su
re you c
ontact th
e servi
ce center
for as
sistan
ce.
If you see the fan error icon or No HDD, HDD FAIL icons on the screen, contact the service center for more details.
Live Screen Menu
In addition to the buttons on the front panel or the remote control, you can access a desired menu by right-
clicking the mouse any area in live mode.
The con
text sen
sitive
menu th
at appea
rs by
right-cl
icking
the scre
en may d
iffer,
depend
ing on
the logi
n/
logout, screen split mode and DVD operation mode.
Menu items of Search, Record, Backup, Shutdown and PTZ can be deactivated, depending on the user permission.
Split Mode Menu
The con
text sen
sitive
menu in
split m
ode di
ffers,
depend
ing on
the logi
n/logou
t status
.
•
•
M
�
M
�
Scene Mode

Audio O
ff
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Login
< Split Mode Menu >
< Single Mode Menu >
Scene Mode

PTZ Control
ZOOM
Audio

Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Login
Scene Mode

Spot Out

Audio
Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
2
13
12
11
10
9
8
7
6
5
4
3
1

English
_29
�
L
I
V
E
M
e
n
u
D
e
s
c
r
i
p
t
i
o
n
Scene Mode
Refer to “
Live Mode
”. (Page 31)
Spot Out
Refer to “
Spot Out
”. (Page 33)
Audio On
/Off
Refer to “
Audio ON
/OFF
”. (Page 34)
Freeze
Refer to “
Freeze
”. (Page 34)
Stop Alarm
Stops the alarm output and the event monitoring. Refer to “
Event Monitoring
”.
(Page 35)
Record/Stop
Starts/stops the standard recording.
Play
Plays the search result (data). Refer to “
Search & Play
>
Play
”. (Page 73)
Search
Refer to “
Search & Play
>
Search
”. (Page 70)
Backup
Refer to “
Using the DVR
>
Setting the Backup
”. (Page 60)
Main Menu
Access
es the m
ain me
nu. Refe
r to the
Using th
e DVR s
ection
. (Page
36)
Shutdown
Turns down the DVR.
Show/Hide Launcher
Shows or hides the launcher. Refer to “
View th
e Launche
r Menu
”. (Page 30)
Login/Logout
You can
log in o
r out.
Single Mode Menu
The sin
gle mode
menu is
availabl
e only i
n Sing
le Mode.
The con
text sen
sitive
menu fo
r the On
e Chan
nel mod
e, in S
plit mo
de is d
ifferen
t from
that of t
he Sing
le mode
.
M
e
n
u
D
e
s
c
r
i
p
t
i
o
n
Full Screen
Select and click a desired channel in Split mode to switch to the full screen of the selected
channel.
PTZ Control
Accesses the
PTZ Cont
rol menu.
The PTZ m
enu is act
ivated only
in One-Ch
annel Live
mode.
(Page 68)
ZOOM
Enlarges the selected image. (Page 34)
P
T
Z
A
l
a
r
m
F
r
e
e
z
e
Full Screen
Spot Out

PTZ Control
ZOOM
Audio

Freeze
Stop Alarm
Record
Play
Shutdown
Hide Launcher
Logout
2
3
1

30_
live
live
View the Launcher M
enu
The Lau
ncher m
enu ap
pears o
n the b
ottom of
the live
screen.
In Live mode, right-click to display the context menu and
select <
Show Launcher
>.
Move the cursor to the bottom and click a desired item in
the Launcher menu.
If no input is entered for 10 seconds, the menu will disappear.
The Launcher menu can be accessed only by using the mouse.
SRD-830/830D/850/850D/870/870D do not support the
16-split screen mode.
M
e
n
u
D
e
s
c
r
i
p
t
i
o
n
Date/Time
Displays the current time and date.
The indication of AM/PM is displayed if you set 12 hours for the time format in
“
System
>
Date/Time/Language
>
Time
”. (Page 36)
Screen Mode
Press this button to switch the screen mode in sequence.
The current mode is highlighted in white.
Menu Expansion Button
Click to display the hidden menu to the right.
Audio
Turns ON/OFF the sound of the selected channel.
Zoom
Enlarges the selected area. This is available only in Single Live mode.
PTZ
Runs the PTZ Control launcher. This is available only in Single Live mode.
Alarm
Stops the alarm if it's activated.
Freeze
Freezes the Live screen temporarily.
Play
Enters Play mode if a file to play exist, and if not, enters Search mode.
Record
Start/End recording the Live screen.
1.
2.
M
�
�
�
PTZ
A
l
a
r
m
F
r e
e
z
e

English
_33
�
L
I
V
E
Switching to Single Mode
When in split mode, select and double-click a desired channel to switch to its Single mode.
Press the number corresponding to a desired channel on the front panel or the remote control to switch to its
Single mode.
Refer to “
Remote Control
>
Using the numeric buttons
”. (Page 13)
Ex : If double-clicking CH 3 or pressing the number “3” on the remote control or the front panel.
SPOT OUT
The Sp
ot Out m
onitorin
g is in
depend
ent of
the Live
mode, wh
ich mon
itors a
specifi
c channe
l throu
gh the S
pot Out
port.
Selecting a Spot Out mode
If an event occurs such as sensor, motion or alarm from the Spot Out port in connection with a monitor, you
can select a output screen mode.
In Live mode, right-click any area on the screen.
The Liv
e menu
appears
.
Click Spot Out.
The sp
lit scr
een app
ears acc
ording
to the S
pot Out
source.
(Page 53)
Spot Out 1 : Supports 16-, 9-, 4-split, Auto Sequence and Single
modes.
Spot Out 2, 3, 4 : Supports 4-split, Auto Sequence and Single
modes.
The number of Spot Out terminals differs according to the model.
For the Spot Out port of a model, refer to “
Part Names and
Functions (Rear)
”. (Page 10)
�
1.
2.
�
�
�
C
H
1
C
H
2
C
H
3
C
H
4
C
H
5
C
H
6
C
H
7
C
H
8
C
H
9
C
H
1
0
C
H
1
1
C
H
1
2
C
H
1
3
C
H
1
4
C
H
1
5
C
H
1
6
CH3
�
Spot Out 1

Spot Out 2

Spot Out 3

Spot Out 4

Scene Mode

Spot Out

Audio O
ff
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
16-split
9-split
4-split
Auto S
equence
Single

CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
< Multichannel Live Menu >

34_
live
live
ZOOM
This is
availab
le only
in Sin
gle Live
mode. In
Single
mode, s
elect a d
esired
area and
use th
e Zoom f
unction
to
enlarge it twice.
Select <
ZOOM
> in the right-click menu.
Press the [
ZOOM
]
button
on
the
front
panel
or
the
remote
control,
or
simply
click
<
>
in
the
launcher
menu. The zoom box appears.
Use the direction keys, or drag and drop to specify an area to enlarge.
Press the [
ENTER
] button, or double-click the selected area to enlarge it twice.
In the enlarged image, use the direction buttons (

) on the
remote
control
or the f
ront pane
l to mo
ve the
enlarged area.
Press the [
ZOOM
]
button
on
the
front
panel
or
the
remote
control,
or
simply
click
<
>
in
the
launcher
menu to release the zoom.
AUDIO ON/OFF
You can
turn th
e soun
d on/of
f corre
spond
ing to t
he chann
el in L
ive mode
.
AUDIO ON/O
FF in Sin
gle mode
Cl
ick
the
au
di
o ic
on (
) on
th
e sc
ree
n, o
r pr
es
s th
e [
AUDIO
] button on the front panel or the remote control
to turn it on/off.
Only the channel where <
AUDIO
> is set to <
ON
> in “
Device
>
Camera
” d
is
pl
ay
s t
he
au
di
o i
co
n (
) i
n L
iv
e
mode that you can use to turn the sound on/off.
FREEZE
This is
availab
le only
in Live
mode, th
is pau
ses p
laying t
he Live
image tem
poraril
y.
Press the [
FREEZE
] button on the front panel or the remote control, or click <
Freeze
> in the launcher
menu.
The pl
ayback o
f the i
mage is
stoppe
d tempo
rarily.
Press the [
FREEZE
] button again, or click <
Freeze
>.
This w
ill rele
ase the
freeze.
1.
2.
3.
�
4.

�
1.
2.


English
_53
�
U
S
I
N
G
T
H
E
D
V
R
Setting the Spot Out
Y
ou can s
et the DV
R to ou
tput in
formatio
n / vid
eo apar
t from
the moni
tor out.
Using the mouse may help make
setup easier.
Use the up/down buttons (

) in <
Device
> window to
move to <
Monitor
>, and press [
ENTER
] button.
Select <
Spot Out
>.
The number of Spot Out terminals differs according to the
model.
Use direction buttons (

) to mov
e to a d
esired
item, and set the value.
Spot Out 1 : You can select between 16-, 9-, 4-split, Auto
Sequence, and Single.
Spot Out 2~4 : Only supports 4 channels, with 4-split, Auto
Sequence, and Single mode.
Set Mode : A window for “
Set Spot Out
” appears and you
can set the channel for it.
Y
ou can
set the d
well time
between
the scr
een swi
tching i
n
“
Setting the Device
>
Camera
>
SEQ-Dwell Time
”.
(Page 46)
Event Display : Sets the duration for the Spot Out on an
event.
If selected <
OFF
>, an event will not output to the Spot Out.
Yo
u can se
tup using
the mous
e right b
utton in
Live s
creen.
Refer to “
Spot Out
”. (Page 33)
When the Spot Out is done, press <
OK
>.
Setting the Screen Mode
Y
ou can c
onfigur
e the Li
ve scr
een and
Split S
creens
.
Using the mouse may help make
setup easier.
Use the up/down buttons (

) in <
Device
> window to
move to <
Monitor
>, and press [
ENTER
] button.
Select <
Mode
>.
Use direction buttons (

) to mov
e to a d
esired
item, and set the value.
Live Screen : Select split modes for the Live screen.
16-, 9-, and 4-split screens are included by default.
Play Screen : Select split modes for the playback screen.
Only the 13-split screen is optional.
Black shows the playback while white shows the Live
screen.
When the screen mode setup is done, press <
OK
>.
1.
2.
�
3.
•
•
•
•

�
4.
1.
2.
3.
•
•
4.
Monitor
Spot Out
Monitor

Spot
Out
1
4-split

Spot
Out
2
4-split

Spot
Out
3
4-split

Spot
Out
4
4-split

Event
Display
OFF
Mode
OK
Cancel
Set Mode
Set Mode
Set Mode
Set Mode
CH 1,2,3,4
CH 5,6,7,8
CH 9,10,11,12
CH 13,14,15,16
Monitor
Mode
M
o
n
i
t
o
r
S
p
o
t
O
u
t
OK
Cancel
Live Play
Live Screen
Play Screen
Monitor
Spot Out
Monitor

Spot
Out
1
16-split

Spot
Out
2
4-split

Spot
Out
3
4-split

Spot
Out
4
4-split

Event
Display
OFF
Mode
OK
Cancel
Set Mode
Set Mode
Set Mode
Set Mode
ALL CH
CH 5,6,7,8
CH 9,10,11,12
CH 13,14,15,16
Set Spot Out
OK
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16