Samsung Galaxy Buds+ Instruction Manual

Frequently Asked Questions
Galaxy Buds+ Device Layout & Functions
With a 2-way dynamic speaker system and booster driver, you can now enjoy powerul bass and
crisp high notes when listening to the Galaxy Buds+. The below guide explains the basic device
layout and functions of the Galaxy Buds+. If you haven't already paired your Galaxy Buds+ to
your compatible smartphone, check out our guide Pair a device with the Galaxy Wearable
app for step-by-step instructions.
Note: This help content is only applicable to the product purchased from Indian retailers. If you
require help for the products purchased from US, Kindly visit Samsung US support section
and for other countries, kindly contact your local Samsung Subsidiary.
Device Layout
Earbud
If foreign materials are place on the touch-sensitive sensor, they may cause the sensor to
malfunction. Before wearing the earbuds, clean the sensor first.
Play music from your Galaxy Buds+
You can listen to music saved in your mobile device by connecting your earbuds to the mobile
device. You can use your connected device or the touchpad on the buds to adjust the volume,
control the playback, or change tracks. Here's simply ways to control your music using your
earbuds' touchpad and don't forget to launch the Galaxy Wearable app first if you want to use the
touchpad controls.

To play or pause the track: Tap the touchpad to play and pause the track.
To play the next track: Double tap the touchpad to play the next track during playback.
To play the previous track: Tap the touchpad three times to play the previous track during
playback.
To adjust the volume during playback: Drag your finger up or down on the touchpad.
You can also adjust the volume by tapping and holding the earbud's touchpad after setting it as a
preset tap-and-hold feature.
Step 1. Launch the Galaxy Wearable app.
Step 2. Tap on Touchpad.
Step 3. Tap and hold the right earbud's touchpad and release your finger when you reach the
desired volume to increase the volume.
Tap and hold the left earbud's touchpad and release your finger when you reach the desired
volume to decrease the volume.

If the audio quality is not as good on the Galaxy Buds+, find more about 'What to do if the audio
quality is poor on my Galaxy Buds+' with Samsung Support.
Note:
If you select the volume adjustment feature as one side's preset tap-and-hold feature, the other
side's preset tap-and-hold feature is also automatically set to the volume adjustment feature.
Adjust the volume via your connected mobile device if a sound is low in your earbuds while at
full volume.
If you connect the earbuds to your mobile device while listening to music, the volume may
change.
On iOS devices, you can connect your earbuds to the Galaxy Buds+ app.
Make sure to keep the device, apps, and the earbuds' firmware up to date for the best listening
experience.
Listening to music at high volumes may cause hearing damage. If you connect the earbuds to
your phone or tablet while listening to music, the volume may change.
Device screenshots and menu may vary depending on the device model and software version.
Charging case
If there is swear or liquid on the charging contacts, corrosion may occur on the Galaxy Buds+.
When there is sweat or liquid on the charging contacts or earbuds, clean them before inserting
the earbuds on the charging case.
Close the charging case when you store or charge the earbuds.

Attaching ear tips
1 Select the ear tip that fits you
2 Cover the latch at the bottom of the earbud with the ear tip
Do not put the earbuds in your ears without ear tips, doing so may hurt your ears.
Do not pull the ear tip excessively when you attach or detach it. The ear tip may tear.
3 Follow the above instructions on the opposite earbud
Attaching the wing tips
1 Select the wing tip that fits you

2 Select the wing tip for the left or right ear.
3 Hook the wong tip's groove to earbud's fixation hook and cover the earbuds with the wing tip

Do not put the earbuds in your ears without ear tips, doing so may hurt your ears.
Do not pull the ear tip excessively when you attach or detach it. The ear tip may tear.
Do not put wing tips on the earbuds the wrong direction. The earbuds will not fit in your ears
properly.
4 Follow the above steps for the opposite earbud
Charging the battery
Type-C USB charging
It is recommended to fully charge the battery before using the earbuds for the first time or when
they haven't been used for extended periods. The earbuds will power on while charging, when
you charge the battery for the first time or when the battery is completely discharged it needs at
least 10 minutes to start to work.
1 Open the charging case
2 Check the direction of each earbuds and correctly insert them into their corresponding slots in the
charging case
3 Close the charging case
4 Connect the Type-C USB cable to the charger and plug the cable into the charger port

Connecting the USB cable improperly may cause seros damage to the charging case.
5 Plug the charger to an electric socket
The batteries of the earbuds and charging case are charged simultaneously.
6 After full charging, disconnect the charging case from the charger, First unplug the USB cable from
the charging case the unplug the charger from the electric socket
Wireless charging
It is recommended to fully charge the battery before using the earbuds for the first time or when
they haven't been used for extended periods. The earbuds will power on while charging, when
you charge the battery for the first time or when the battery is completely discharged it needs at
least 10 minutes to start to work.
1 Open the charging case
2 Check the direction of each earbud and correctly insert them into their corresponding slots in the
charging case
3 Close the charging case
4 Place rge centre of the charging case's back on the centre of the wireless charger

5 After fully charging, disconnect the charging case from the wireless charger
Do not place the charging case on the wireless charger when conductive materials (metal
objects & magnets) are placed bwteen the charging case and the wireless charger.
Ensure that you use Samsung approved wireless chargers. If you use oher wirless chargers, the
battery may not charge properly.
Wireless charging using Wireless PowerShare
1 Open the charging case
2 Check the direction of each earbud and correctly insert them into their corresponding slots in the
charging case
3 Close the charging case
4 Place the centre of the charging case's back on the centre of the wireless charger

The location of the wireless charging coil may vary by device. Adjust the device and the
charging case to make a strong connection.
5 After fully charging, disconnect the charging case from the wireless charger
To charge properly, do not move or use either the device thats functions as a wireless charger or
the charging case while charging.
If you charge the Galaxy Buds+ while charging the the device that functions as a wireless
charger, the charging speed may decrease or the Galaxy Buds+ may not charge properly,
depending on the charger type.
If the remaining battery power of the device that functions as a wireless charger drops below a
certain level, power sharing will stop.
Understanding the Light Indicators
The battery indicator lights inform you of your earbuds and the charging case's status. The
earbud battery indicator light is located inside the charging case and shows you the charging
status of the earbuds. The charging case battery indicator light on the front of the charging case
indicates the charging status of the case itself.

Earbuds battery indicator light
Earbud battery indicator light
Colour
Status
Continuously red
Charging
Continuously green
Fully charged
Flashes red
Charging blocked due to abnormal temperatures
Charging case battery indicator light
Colour
Status
Continuously red
Charging
Continuously green
Fully charged
Flashes red (rapid pace)
Charging blocked due to abnormal
temperatures
Flashes red (flashes after closing the charging
case)
Battery power is low (lower than 10%)
Red (stays on for 5 deconds after closing the
charging case)