Samsung DBJ Series User manual

Quick Setup Guide
−Recommended hours of use per day of this product is under 16 hours. If the product is used for longer than
16 hours a day, the warranty may be void.
−The colour and the appearance may differ depending on the product, and the specifications are subject
to change without prior notice to improve the performance.
−Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
DBJ (DB43J DB49J)
DCJ (DC43J DC49J)
BN68-08179G-02
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Reverse Side
Issues Solutions
The screen keeps
switching on and off.
Check the cable connection between
the product and PC, and ensure the
connection is secure.
No Signal is displayed
on the screen.
Check that the product is connected
correctly with a cable.
Check that the device connected to the
product is powered on.
Not Optimum Mode is
displayed.
This message is displayed when a signal
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table
and set the maximum resolution and
frequency according to the product
specifications.
The images on the
screen look distorted.
Check the cable connection to the
product.
The screen appears
unstable and shaky.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu
and the Standard Signal Mode Table.
There are shadows or
ghost images left on
the screen.
There is no image on
the screen and the
power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the
mouse to return to the previous screen.
Issues Solutions
Picture quality of the
product is different
from the dealer
shop where it was
purchased.
Use an HDMI cable to obtain high-
definition (HD) picture quality.
The remote control
does not work.
Make sure that the batteries are correctly
in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon
signs switched on in the vicinity.
A beeping sound is
heard when my PC is
booting.
If a beeping sound is heard when your PC
is booting, have your PC serviced.
When I try to change
the PC resolution, a
message “The defined
resolution is not
supported.” appears.
The message “The defined resolution
is not supported.” appears if the input
source resolution exceeds the maximum
resolution of the display.
To resolve the issue, change the PC
resolution to a resolution supported on
the display.
Troubleshooting Guide
Checking the Components Control Panel
Contact the vendorwhere you purchased the product if any
components are missing.
The pictures may look different from the actual components.
1 Remote sensor
Press a button on the remote control pointing at the bottom of the
product face to perform the function. The remote control sensor is
located on the bottom of the product.
- Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
2 Panel Key
Quick Setup Guide
Warranty card
(Not available in some
locations)
Power cord
Batteries
(Not available in some
locations)
Remote Control RS232C(IN) adapter
Speaker
1Connect to a USB memory device.
‐The USB ports on the product accept a maximum
constant current of 1.0A. If the maximum value is
exceeded, USB ports may not work.
2Connects to a source device using a HDMI cable or
HDMI-DVI cable.
3DVI: Connects to a source device using a DVI cable or
HDMI-DVI cable.
MAGICINFO IN: To use MagicInfo, make sure to connect
the DP-DVI cable.
4Connects to MDC using an RS232C adapter.
5Connects to a source device using the AV/Component
adapter.
6Connects to MDC using a LAN cable.
7Receives sound from a PC via an audio cable.
8Connects to the audio of a source device.
The functions available may vary depending on the product model.
BN68-08179G-02_QSG_DBJ DCJ_INDIA_ENG.indd 1 2019-06-28 오후 2:42:25

Specifications
Model Name DB43J / DC43J DB49J / DC49J
Panel
Size 107.9 cm 123.2 cm
Display area
940.89 mm (H) x 529.25 mm (V) 1073.779 mm (H) x 604.00 mm (V)
Power Supply AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental
considerations
Operating Temperature : 0 °C – 40 °C (32 °F – 104 °F)
Humidity : 10% – 80%, non-condensing
Storage Temperature : -20 °C – 45 °C (-4 °F – 113 °F)
Humidity : 5% – 95%, non-condensing
- This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to
take adequate measures.
- For detailed device specifications, visit the Samsung Electronics website.
- The PVC Free (except for accessory cables) logo is the self-declared trademark of Samsung.
* Accessory cables: signal cables and power cords
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Tel. 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)
www.samsung.com/in/support
Connecting to a PC
Connecting to a Video Device
Connecting to MDC
For details on how to use the MDC programme, refer to Help after
installing the programme.
The MDC programme is available on the website.
The DCJ models do not support DOLBY AUDIO for HDMI
sources.
The DCJ models do not support DOLBY AUDIO for HDMI sources.
Connecting to an Audio System
This product is RoHS compliant.
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of theirworking life. To prevent
possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
For more information on safe disposal and recycling visit ourwebsite www.samsung.com/in or contact our Helpline numbers
- 1800 40 SAMSUNG(1800 40 7267864) (Toll-Free)
Warning! Important Safety Instructions
(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED
PERSONNEL.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
This symbol indicates that this product has
included important literature concerning
operation and maintenance.
» If your equipment uses an AC adapter:
- Only use the AC adapter with your product by
Samsung.
- Do not use the power cord with other products.
» Do not install this equipment in a confined space such as a case
or similar.
» The slots and openings in the cabinet and in the back or bottom
are provided for necessary ventilation. The slots and openings
must never be blocked or covered.
» The product should be located away from heat sources such as
radiators, heat registers, or other products that produce heat.
» Do not place a vessel containing water (vases etc.) on this
apparatus, as this can result in a risk of fire or electric shock.
(Apparatus shall not be exposed to dripping or splashing)
» The apparatus must be connected to an earthed MAINS socket-
outlet (Class l Equipment only). Or Use only a properly grounded
plug and receptacle (Class l Equipment only).
» To disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug shall
be readily operable.
» As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this
unit by POWER.
- HEVC Advance supports the DBJ models only.
DBJ: RS232C OUT
DBJ, DCJ: RJ45
DBJ, DCJ: RJ45 HUB
DBJ, DCJ: RS232C IN
DBJ: RS232C OUT
DBJ, DCJ
DBJ, DCJ
DBJ
DBJ
DBJ
DBJ
DBJ: RS232C OUT
DBJ, DCJ: RJ45
DBJ, DCJ: RJ45 HUB
DBJ, DCJ: RS232C IN
DBJ: RS232C OUT
DBJ, DCJ
DBJ, DCJ
DBJ
DBJ
DBJ
DBJ
DBJ: RS232C OUT
DBJ, DCJ: RJ45
DBJ, DCJ: RJ45 HUB
DBJ, DCJ: RS232C IN
DBJ: RS232C OUT
DBJ, DCJ
DBJ, DCJ
DBJ
DBJ
DBJ
DBJ
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/HDMI/AUDIO IN
DBJ, DCJ: AUDIO OUT
DCJ: AV/COMPONENT IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: AV/COMPONENT IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/MAGICINFO IN
DBJ, DCJ: DVI/HDMI/AUDIO IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/MAGICINFO IN
DCJ: DVI/HDMI/AUDIO IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/MAGICINFO IN
DBJ, DCJ: DVI/HDMI/AUDIO IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/MAGICINFO IN
DCJ: DVI/HDMI/AUDIO IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/MAGICINFO IN
DBJ, DCJ: DVI/HDMI/AUDIO IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/MAGICINFO IN
DCJ: DVI/HDMI/AUDIO IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/MAGICINFO IN
DBJ, DCJ: DVI/HDMI/AUDIO IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/MAGICINFO IN
DCJ: DVI/HDMI/AUDIO IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/HDMI/AUDIO IN
DBJ, DCJ: AUDIO OUT
DCJ: AV/COMPONENT IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: AV/COMPONENT IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/HDMI/AUDIO IN
DBJ, DCJ: AUDIO OUT
DCJ: AV/COMPONENT IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: AV/COMPONENT IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/HDMI/AUDIO IN
DBJ, DCJ: AUDIO OUT
DCJ: AV/COMPONENT IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: AV/COMPONENT IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/MAGICINFO IN
DBJ, DCJ: DVI/HDMI/AUDIO IN
DBJ: HDMI IN 1 (ARC), HDMI IN 2
DCJ: HDMI IN 1, HDMI IN 2
DBJ, DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/MAGICINFO IN
DCJ: DVI/HDMI/AUDIO IN
Precaution for using a wall mount:
If you want to use a wall mount, make sure that it allows you to remove the product from it without using any additional tool.
BN68-08179G-02_QSG_DBJ DCJ_INDIA_ENG.indd 2 2019-06-28 오후 2:42:27