Samsung MWR-SH00N User manual

SOL MWR-SH00N_IB_04149A-02_EN.indd 2 2016-03-02 오전 11:12:48

Wired remote controller
MWR-SH00N
Air Conditioner
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
EN ES ELFR NL IT PLPT HU DE RU AR
DB68-04149A-02
SOL MWR-SH00N_IB_04149A-02_EN.indd 3 2016-03-02 오전 11:12:48

ENGLISH-2
Contents
Preparation
Safety precautions ..........................................................................................................3
Part names..................................................................................................................5
Basic function
Basic operation of air conditioner............................................................................................7
Advanced function
Selecting the air ow direction ..............................................................................................9
Selecting quiet operation ...................................................................................................9
Resetting a lter...........................................................................................................10
Setting on timer...........................................................................................................10
Setting o timer ..........................................................................................................11
Others
How to set additional user functions.......................................................................................12
SOL MWR-SH00N_IB_04149A-02_EN.indd 2 2016-03-02 오전 11:12:48

ENGLISH-3
01 PREPARATION
Safety precautions
This content is intended to protect the user’s safety and prevent property damage. Please read it carefully for correct use of
the product.
WARNING Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION Hazards or unsafe practices that may result in minor personal injury or property damage.
Follow directions.
Do NOT attempt.
Make sure the machine is grounded to prevent electric shock.
Unplug the power plug from the wall socket.
Do NOT disassemble.
FOR INSTALLATION WARNING
The installation of this appliance must be performed by a qualied technician or service company.
 Failing to do so may result in electric shock, re, explosion, problems with the product, or injury.
You must connect the product with rated power upon installation.
 Failing to do so may result in problems with the product, electric shock, or re.
Do not install this appliance near a heater, inammable material. Do not install this appliance in a humid, oily or
dusty location, in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a
location where gas may leak.
 This may result in electric shock or re.
FOR INSTALLATION CAUTION
Install the product on a hard and even place that can support its weight.
 If the place cannot support its weight, the product may fall down and it may cause product damage.
FOR POWER SUPPLY WARNING
Do not bend or pull the power cord excessively.
Do not twist or tie up the power cord.
 This may result in electric shock or re.
PREPARATION
SOL MWR-SH00N_IB_04149A-02_EN.indd 3 2016-03-02 오전 11:12:48

ENGLISH-4
Safety precautions
FOR OPERATION WARNING
If the appliance generates a strange noise, a burning smell or smoke, stop the operation immediately and
contact your nearest service center.
 Failing to do so may result in electric shock or re.
To reinstall the air conditioner, please contact your nearest service center.
 Failing to do so may result in problems with the product, water leakage, electric shock, or re.
 A delivery service for the product is not provided. If you reinstall the product in another location, additional
construction expenses and an installation fee will be charged.
If the malfunction diagnosis indicator appears or abnormal operation occurs, stop operation immediately.
 If you detect any burning smells from the product or abnormal operation occurs, then immediately turn o the
air conditioner and power, and then contact the service center. Continuing to use the device in this state can
cause electric shock, re, or damage to the product.
Do not attempt to repair, disassemble, or modify the appliance yourself.
 Failing to do so may result in electric shock, re, problems with the product, or injury.
FOR OPERATION CAUTION
Do not allow water to enter the product.
 This may result in re or explosion.
Do not operate the appliance with wet hands.
 This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
 As well as being harmful to humans, it may also result in electric shock, re or problems with the product.
Do not apply a strong impact to the remote controller and do not disassemble the remote controller.
Do not use this product for other purposes.
 This product is designed to only be used for a system air conditioner.
Do not press the buttons with any sharp objects.
 This may result in electric shock or part damage.
FOR CLEANING WARNING
Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner, alcohol or acetone to
clean the appliance.
 This may result in discoloration, deformation, damage, electric shock or re.
SOL MWR-SH00N_IB_04149A-02_EN.indd 4 2016-03-02 오전 11:12:48

ENGLISH-5
01 PREPARATION
Part names
Display
①
⑨
⑩
③
④
⑤②
⑥
⑧
⑦
Classication Indication Function
①Displays air conditioner operation.
②Displays quiet operation.
③Displays set temperature.
④Displays AC fan speed.
⑤Displays air swing(Up/Dn).
⑥Displays on or o time (scheduled time).
⑦Displays lter cleaning (lter cleaning period).
⑧Displays check/partial locking/all locking/Invalid operation.
⑨Displays centralized control.
⑩Displays purier mode (When the air conditioner is in purier mode).
SOL MWR-SH00N_IB_04149A-02_EN.indd 5 2016-03-02 오전 11:12:49

ENGLISH-6
Part names
Buttons
①
②
④
⑤
⑥
⑦
③
Classication Button Function
①Operation On /
O button Turns the air conditioner power On or O.
②Mode button Selects a desired air conditioner operation.
③,
Temperature setting
button Sets a desired temperature.
④Fan Speed button Changes the air conditioner’s fan speed.
⑤Air Swing /
Quiet button
Selects the air ow direction of the air conditioner. /
Selects the quiet operation. (By pressing and holding the button
for 3 seconds)
⑥Timer /
Filter Reset button
Selects the timer function /
Turns the lter cleaning lamp o. (By pressing and holding the
button for 3 seconds)
⑦Set / Cancel button Conrm or cancel (By pressing and holding the button for 3
seconds) the timer function.
SOL MWR-SH00N_IB_04149A-02_EN.indd 6 2016-03-02 오전 11:12:50

ENGLISH-7
02 BASIC FUNCTION
BASIC FUNCTION
Basic operation of air conditioner
Basic operations can be selected by pressing the [Mode] button.
Auto
This operation allows you to automatically adjust the temperature and the fan speed to maximize your comfort.
 When the indoor temperature is very high, the device will produce a strong, cold breeze. When the indoor temperature
cools down, then weaker breeze will be produced.
Cool
This is a frequently used operation that allows you to adjust the fan speed, temperature, and air ow direction the way you
like.
 If you select heating operation during cooling operation, then the cooling operation is canceled.
Dry
This operation eectively removes all excess humidity so that you can feel refreshed during rainy days.
Fan
This operation produces breeze, just like a powerful fan, so that you can enjoy a refreshing breeze.
Heat
This function produces warm breeze so that you can use it in the fall or winter.
 Immediately after starting the heating operation, the air conditioner system may stop producing any breeze at all for a
while to avoid generating cold breeze.
 Defrost indicator (Defrost)
- If you start removing frost from the outdoor unit during heating operation, the indicator will turn on.
When defrosting is over, the indicator will turn o.
(When the frost is being removed, the indoor unit does not generate any breeze.)
 If you stop the air conditioner after the heating operation, the air conditioner will produce some breeze to discharge all
the heat from the indoor unit.
 If you select the cooling operation during heating operation, then the heating operation is canceled.
SOL MWR-SH00N_IB_04149A-02_EN.indd 7 2016-03-02 오전 11:12:50

ENGLISH-8
ADVANCED FUNCTION
Basic operation of air conditioner
Press the button to operate the air conditioner.
Press the button to select a desired operation.
Press the button to select a fan speed.
Auto (Auto)
Cool (Low) , (Medium), (High), (Auto)
Dry (Auto)
Fan (Low) , (Medium), (High)
Heat (Low) , (Medium), (High), (Auto)
Press the , button to set a desired temperature.
Auto You can adjust the desired temperature by 1 °C(1 °F) within a range of 18 °C~30 °C(65 °F~86 °F).
Cool You can adjust the desired temperature by 1 °C(1 °F) within a range of 18 °C~30 °C(65 °F~86 °F).
Dry You can adjust the desired temperature by 1 °C(1 °F) within a range of 18 °C~30 °C(65 °F~86 °F).
Fan You can’t change the desired temperature.
Heat You can adjust the desired temperature by 1 °C(1 °F) within a range of 16 °C~30 °C(61 °F~86 °F).
* Nordic models (ACXSCH) : 8 °C~30 °C
SOL MWR-SH00N_IB_04149A-02_EN.indd 8 2016-03-02 오전 11:12:51

ENGLISH-9
03 ADVANCED FUNCTION
ADVANCED FUNCTION
Selecting the air ow direction
This function allows you to shift the air ow direction up and down.
Press the [Air Swing] button to tilt the blade up and down.
 Press the [Air Swing] button one more time to set the air ow direction when
the blade reaches the desired position.The up/down tilting of the blade will
stop in place.
• If you press the [Air Swing] button for a duct type indoor unit, the air
ow direction will not be controlled and lamp will blink.
• For 360 cassette model, indicator will change as pressing Air Swing
button.
Number of press Air ow direction Indicator
1 time Swing
2 times Spot
3 times Swing
4 times Mid
5 times Swing
6 times Wide
 The order may change according to the mode operated for the last
time.
• The individual air ow direction control function is available on
360cassette wireless remote controller (AR-KH00E, AR-KH00U) only.
NOTE
Selecting quiet operation
In quiet operation, the noise from the air conditioner operation will be decreased.
Press and hold the [Quiet] button for 3 seconds to select the quiet operation.
Auto Quiet Cancel is repeated.
Cool Quiet Cancel is repeated.
Dry Quiet Cancel is repeated.
Fan will blink.
Heat Quiet Cancel is repeated.
• If you press the [Quiet] button for an air conditioner which does not
support the quiet operation, will blink.
NOTE
SOL MWR-SH00N_IB_04149A-02_EN.indd 9 2016-03-02 오전 11:12:51

ENGLISH-10
Resetting a lter
 When the appears on the remote controller, clean the lter and press and
hold the [Filter Reset] button for 3 seconds to reset the lter usage time.
Setting on timer
When an indoor unit is turned o,
1. Press the [Timer] button to set on time.
- When pressing the [Timer] button one time, the time for on timer function
will blink.
- Press the [ ] or [ ] button to adjust the on time from 30 minutes to 3 hours
by 30 minutes unit and from 3 to 18 hours by one hour unit.
2. Press the [Set] button to complete the setting.
- When pressing the [Set] button, the set time will stop blinking.
- If you do not press the [Set] button within 3 minutes after selecting the set
time, the time you have set will be canceled. Therefore, you should check that
the time for on timer function has been set.
Cancel Press and hold the [Set] button for 3 seconds.
• On timer function can be set only when an indoor unit is turned o.
NOTE
SOL MWR-SH00N_IB_04149A-02_EN.indd 10 2016-03-02 오전 11:12:52

ENGLISH-11
03 ADVANCED FUNCTION
Setting o timer
When an indoor unit is turned on,
1. Press the [Timer] button to set o time.
- When pressing the [Timer] button one time, the time for o timer function
will blink.
- Press the [ ] or [ ] button to adjust the o time from 30 minutes to 3 hours
by 30 minutes unit and from 3 to 18 hours by one hour unit.
2. Press the [Set] button to complete the setting.
- When pressing the [Set] button, the set time will stop blinking.
- If you do not press the [Set] button within 3 minutes after selecting the set
time, the time you have set will be canceled. Therefore, you should check that
the time for o timer function has been set.
Cancel Press and hold the [Set] button for 3 seconds.
• O timer function can be set only when an indoor unit is turned on.
NOTE
SOL MWR-SH00N_IB_04149A-02_EN.indd 11 2016-03-02 오전 11:12:52

ENGLISH-12
How to set additional user functions
Main menu
Sub-menu
1
SEG Used
2
1. If you want to apply a detailed setting, press and hold the [Timer] and the [Set] button for 3 seconds or more.
- You will enter the user set mode, and the main menu will be displayed.
2. Select a desired menu by referring to the list of a detailed setting for a wired remote controller.
- Using the [ ] / [ ] buttons, select a main menu number and press the [Timer] button to enter the sub-menu setting
screen.
- Using the [ ] / [ ] buttons, select a sub-menu number and press the [Timer] button to enter the data setting screen.
- Once you have entered the setting screen, the current setting will be displayed.
- Refer to the chart for data setting.
- Using the [ ] / [ ] buttons, change the settings and press the [Timer] button to move to the next setting.
- Press the [Set] button to save the setting and exit to the sub-menu setting screen.
- Press the [Air Swing] button to exit to general mode.
• While setting the data, you can change the seg number with the [Fan Speed / Timer] buttons.
• While conguring the setting, press the [Air Swing] button to exit to the sub-menu setting screen without
saving the setting.
NOTE
Main
Menu
Sub
Menu Function Default Page Range Remarks
0 1 Reset to default value of a user mode 0 1 0-Disuse, 1-Reset
1
1All locking 0 1 0-Clear, 1-Lock
2
Partial Key lock
Lock of operation ON/OFF key 0 1 0-Clear, 1-Lock
3Lock of operation selection key 0 1 0-Clear, 1-Lock
4Lock of temperature setting key 0 1 0-Clear, 1-Lock
5Lock of fan speed key 0 1 0-Clear, 1-Lock
6Lock of on or o timer setting key 0 1 0-Clear, 1-Lock
2
1
Temperature limit
Lower limit 8 1 16~30
* Nordic models
(ACXSCH)
: 8 ~30
2Upper limit 30 1
OTHERS
SOL MWR-SH00N_IB_04149A-02_EN.indd 12 2016-03-02 오전 11:12:52

ENGLISH-13
04 OTHERS
Example of locking all buttons
1. Press and hold the [Timer] and [Set] buttons for 3 seconds at the same time.
- When the main menu is displayed, select No.1 using the [ ] / [ ] buttons.
2. Press the [Timer] button to select a number in sub-menu.
- Select No.1 using the [ ] / [ ] buttons.
3. Press the [Timer] button to enter the data setting screen.
- When you enter the setting screen, current setting will be displayed.
4. Select No.1 using the [ ] / [ ] buttons.
- The option of a remote controller will be set to 'All locking'
5. Press the [Set] button to complete the option settings.
- Settings will be saved and sub menu will be displayed.
6. Press the [Air Swing] button to exit to general mode.
SOL MWR-SH00N_IB_04149A-02_EN.indd 13 2016-03-02 오전 11:12:52