Samsung DIR-518L User manual

Version 1.0 | 2/12/2013
DIR-518L
User Manual
Wireless AC600 Dual Band Wall-Plug Cloud Router

iD-Link DIR-518L User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of
their respective companies.
Copyright © 2013 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Systems, Inc.
This purpose of this product is to create a constant network connection for your devices. As such, it does not have a standby
mode or use a power management mode. If you wish to power down this product, please simply unplug it from the power
outlet.
Revision Date Description
1.0 Nov 29, 2013 • Initial release
Preface

iiD-Link DIR-518L User Manual
Table of Contents
Preface................................................................................. i
Manual Revisions........................................................................... i
Trademarks ...................................................................................... i
Package Contents......................................................................... 1
System Requirements................................................................. 2
Introduction ................................................................................... 3
Features............................................................................................ 4
Hardware Overview..................................................................... 5
Front/Top ................................................................................. 5
Bottom...................................................................................... 6
Operation Modes.......................................................................... 7
Router Mode........................................................................... 8
Wireless Installation Considerations...................................... 9
Setting Up Your DIR-518L ........................................................10
Initial Setup Wizard (Router Mode)......................................12
Firmware ................................................................................15
Status ..............................................................................................16
Device Info ............................................................................16
Connecting a Wireless Client ..........................................17
WPS Button...................................................................................17
Windows® 7...................................................................................18
WPA/WPA2 ............................................................................18
WPS..........................................................................................21
Windows Vista®............................................................................25
WPA/WPA2 ............................................................................26
Windows® XP................................................................................28
WPA/WPA2 ............................................................................29
Troubleshooting ..............................................................31
Wireless Basics .................................................................35
What is Wireless?.........................................................................36
Tips...................................................................................................38
Networking Basics...........................................................39
Statically Assign an IP address...............................................40
GPL Code Statement........................................................41
Safety Statements ...........................................................56
Table of Contents

1D-Link DIR-518L User Manual
Section 1 - Product Overview
Package Contents
DIR-518L Wireless AC600 Dual Band Wall-Plug Cloud Router
Quick Install Guide
Companion Card
If any of the above items are missing from your package, please contact your reseller.

2D-Link DIR-518L User Manual
Section 1 - Product Overview
Network Requirements
• Cable/DSL modem, 3G/4G USB adapter, or a hotspot
• IEEE 802.11ac/n/b/a wireless clients
• 10/100 Ethernet
Web-based Conguration
Utility Requirements
Computer with the following:
• Windows®, Macintosh, or Linux-based operating system
• An installed Ethernet adapter
Browser Requirements:
• Internet Explorer 8 or higher
• Firefox 8.0 or higher
• Safari 4.0 or higher
• Google Chrome (16.0.9.12.75)
Windows®Users: Make sure you have the latest version of Java
installed. Visit www.java.com to download the latest version.
System Requirements

3D-Link DIR-518L User Manual
Section 1 - Product Overview
Introduction
TOTAL SECURITY
The most complete set of security features including Active Firewall and WPA/WPA2 to protect your network against outside intruders.
TOTAL COVERAGE
Provides greater wireless signal rates even at farther distances for best-in-class Whole Home Coverage.
ULTIMATE PERFORMANCE
The D-Link Wireless AC600 Dual Band Wall-Plug Cloud Router (DIR-518L) lets you create a secure wireless network to share photos, les,
music, video, printers, and network storage throughout your home. Connect the DIR-518L router to a cable or DSL modem and share
your high-speed Internet access with everyone on the network. In addition, this Router includes a Quality of Service (QoS) engine that
keeps digital phone calls (VoIP) and online gaming smooth and responsive, providing a better Internet experience.
TOTAL NETWORK SECURITY
The DIR-518L router supports all of the latest wireless security features to prevent unauthorized access, be it from over the wireless
network or from the Internet. Support for WPA/WPA2 standards ensure that you’ll be able to use the best possible encryption method,
regardless of your client devices. In addition, this router utilizes dual active rewalls (SPI and NAT) to prevent potential attacks from
across the Internet.
* Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specications. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely
aect wireless signal range.

4D-Link DIR-518L User Manual
Section 1 - Product Overview
• Faster Wireless Networking - The DIR-518L provides an up to 600 Mbps* wireless connection with other
802.11ac wireless clients. This capability allows users to participate in real-time activities online, such as video
streaming, online gaming, and real-time audio.
• Compatible with 802.11g Devices - The DIR-518L is still fully compatible with the IEEE 802.11g standards, so
it can connect with existing 802.11g devices.
• Multimedia On-The-Go - The DIR-510L is designed as the media hub for all of your mobile needs with the
following features:
• USB Interfaces - Easily store and share music, videos, photos, and les on your USB drive while charging
another device.
• UPnP and DLNA Support - Compliant with the latest DLNA certication requirements, the DIR-518L can
stream many compatible media formats to other DLNA devices wirelessly.
• mydlink SharePort app - Stream your media and upload les locally or remotely through the Internet to
your iPhone®, iPad® or Android™ device.
• Charger - Lets you charge your mobile devices.
* Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specications. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely
aect wireless signal range.
Features

5D-Link DIR-518L User Manual
Section 1 - Product Overview
Hardware Overview
Front/Top
1Mode Selector
Switch Slide this switch to select the Charger, Router modes.
2LED Indicator This indicates the current status of the DIR-518L, as detailed in the table below.
LED Indicator Color Status Description
Power/Status
Green
Solid Green The device is powered ON and operating properly
Blinking Green The device is processing WPS
Light o The device is o
Red
Solid Red During Power ON or system is defective
Light o The device is powered o
2
1

6D-Link DIR-518L User Manual
Section 1 - Product Overview
Hardware Overview
Bottom
1USB Port Connect a USB 1.1 or 2.0 ash drive to congure the wireless settings using SharePort™ Mobile and SharePort™
Web File Access. Both allows you to share a USB or a storage device with your local network.
2Ethernet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem.
1 2

7D-Link DIR-518L User Manual
Section 1 - Product Overview
Operation Modes
Depending on how you want to use your DIR-518L will determine which mode you use. The following pages describe each
mode to help you gure out which one to use.
• Charger Mode
• Router Mode

8D-Link DIR-518L User Manual
Section 2 - Installation
Router Mode
In Router Mode, the DIR-518L connects to your cable modem, DSL modem, or other Internet source and shares your Internet
connection with your devices wirelessly, providing Internet access for an entire home or oce. You can also share les with
other computers or devices on your wireless network by using the SharePort Mobile feature.
Router Mode
Cable/DSL Modem USB Storage Drive Wireless Devices Internet

9D-Link DIR-518L User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the
operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings,
or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types
of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to
follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum -
each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that
the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle
appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position
devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building Materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range.
Try to position access points, wireless routers, and computers so that the signal passes through drywall or open
doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le
cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF
noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security
systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone
base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not
in use.

10D-Link DIR-518L User Manual
Section 2 - Installation
Setting Up Your DIR-518L
1. Move the switch on the top of the DIR-518L to the mode you
wish to use, then plug it in. Verify that the power LED has
turned green before continuing.
If you are using Router Mode:
Move the switch on the top of the DIR-518L to Router and
plug it into a wall outlet near your cable/DSL modem or router.
Connect one end of the Ethernet cable into the Ethernet port
of your cable/DSL modem or router and then plug the other
end of the cable into the Ethernet port of the DIR-518L. Verify
that the power LED has turned green before continuing.
2. From your laptop or mobile device, go to your Wireless Utility
to display the available wireless networks and select the
Wi-Fi name that is printed on the Wi-Fi Conguration Note
included in your package (ex: dlink-a8fa). Then, enter the
Wi-Fi password also printed on the Wi-Fi Conguration Note
(akbdj1936).
Outlet Ethernet
Web browser link:
http:/ /dlinkrouter or
http:// 192.168.0.1
Default conguration
Username: “Admin”
Password: ““ (leave the eld blank)
Wi- Fi Name (SSID) :
dlinka8fa
Wi-Fi Password :
akbdj19368
Web browser link:
http://dlinkrouter or
http:// 192.168.0.1
Your conguration
Username: Admin
Password:
Wi- Fi Name (SSID) :
Wi-Fi Password :
D-Link DIR-505 Mobile Companion Wi-Fi Conguration Note

11D-Link DIR-518L User Manual
Section 2 - Installation
3. Open a web browser. Firsttime userswillautomaticallybedirected
to the appropriate Setup Wizard for the selected operation mode.
Please follow the on-screen instructions to complete setup.
If the Setup Wizard does not appear, type http://dlinkrouter in the
address bar.
For detailed information on conguring your device, refer to the
following sections of the manual:
• “Router Mode” on page 23

12D-Link DIR-518L User Manual
Section 2 - Installation
This wizard is designed to guide you through a step-by-step
process to congure your new D-Link router and connect to the
Internet.
Click Next to continue.
If this is your rst time setting up the DIR-518L, open your web
browser. You will automatically be directed to the Wizard Setup
Screen.
If the Setup Wizard does not appear, type http://dlinkrouter in
the address bar.
If you have already congured your settings and you would like
to access the conguration utility, please refer to “Web-based
Conguration” on page 18.
Initial Setup Wizard (Router Mode)

13D-Link DIR-518L User Manual
Section 2 - Installation
If you chose Router mode, the DIR-518L will try to detect what
type of Internet connection you have and will ask you for the
related settings. Enter the settings for your connection and
click Next.
Select whether you want to use Router mode or Access Point
mode for your DIR-518L and click Next. In most situations, Router
mode should be used.
If your Internet connection cannot be detected(or if you click
the Prev button after the previous step), you will need to
select which type of Internet connection you have. Select your
Internet connection type, then click the Next button and enter
the related settings.
Note: Most cable modem connections use DHCP, and most
DSL modem connections use PPPoE. If you are not sure which
connection type you use or what settings to enter, contact your
Internet service provider.

14D-Link DIR-518L User Manual
Section 2 - Installation
Create a wireless security passphrase or key (between 8-63
characters). Your wireless clients will need to have this passphrase
or key entered to be able to connect to your wireless network.
Click Next to continue.
Enter a password to secure conguration access to your router.
Please note that this password will be used to log in to the
conguration interface, but is not the same as the password
used for your wireless network. Check the Enable Graphical
Authentication box to enable CAPTCHA authentication for added
security. Click Next to continue.
Select your time zone from the drop-down menu and click Next
to continue.
Setup is complete, and your wireless network name and
password will be displayed. It is recommended that you write this
information down for future reference. Click Save to save your
settings and reboot the router.

15D-Link DIR-518L User Manual
Section 3 - Router Mode
Firmware
Upgrade:
Firmware
You can upgrade the rmware of the DIR-518L here. Make sure the rmware you want to use is on the local hard drive of the
computer. Click on Browse to locate the rmware le to be used for the update. Please check the D-Link support website for
rmware updates at http://support.dlink.com. You can download rmware upgrades to your hard drive from this site.
Download a language pack from the D-Link website. After
you have downloaded the new language pack, click Browse
to locate the language pack le on your hard drive. Click
Upload to complete the language pack upgrade.
You can change the language of the web UI by uploading available
language packs.
Browse:
Click on Check Now to find out if there is an updated
rmware; if so, download the new rmware to your hard
drive.
After you have downloaded the new firmware, click
Browse to locate the rmware update on your hard drive.
Click Upload to complete the rmware upgrade. Do not
disconnect from the DIR-518L or power your computer or
DIR-518L o during the upgrade process.

16D-Link DIR-518L User Manual
Section 3 - Router Mode
Status
Device Info
General:
WAN
LAN:
Wireless LAN:
LAN
Computers:
Displays the time and rmware version.
Displays information about the connection to your modem
or Internet connection.
Displays the MAC address and the private (local) IP settings
for the access point.
Displays the wireless MAC address and your wireless settings
such as SSID and Channel.
Displays information about the devices on your local
network.
This page displays the current information for the DIR-518L. It will display the LAN and wireless LAN information.

17D-Link DIR-518L User Manual
Section 7 - Connecting a Wireless Client
Connecting a Wireless Client
WPS Button
Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS
process).
The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-518L router. Please refer to your user manual for the
wireless device you want to connect to make sure you understand how to enableWPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DIR-518L for about 1
second. The WPS button will start to blink.
Step 3 - Allow up to 1 minute to congure. Once the WPS light stops blinking, you will be connected and your wireless
connection will be secure with WPA2.