Samsung ML-2250 Series Owner's manual

Part Number: ML-2250D5
Gram Load: 125 grams
Yield @ 5%: 5,000 pages
Resolution: 1200 dpi
Small Flat Blade Screwdriver
Philips Screwdriver
Supplies Needed:
Lint free cloth
Cotton Swab
Acetone
Toner
Technical Instructions Printers OEM Info Tools 1
Step 1
Remove the five screws from the top of
the cartridge.
(See Photo1)
Photo 1
Photo 2
Photo 3
ML2250TECH
Step 2
Using a small flat blade screwdriver,
release the two locking tabs located next
to the cartridge handle.
(See Photo2)
Step 3
Rotate the cartridge 180∞release the
two locking tabs located in the front of the
cartridge.
(See Photo3)
E-mail: [e-mail] Website: www.futuregraphicsllc.com
Samsung ML-2250
Samsung ML-2251N
Samsung ML-2251NP
Samsung ML-2252W
Samsung MFP soon
to be released
Dell 1600N
US 1 800 394.9900
Int’l +1 818 837.8100
FAX [phone]
Int’l +1 818 838.7047
DALLAS, USA
US 1 877 499.4989
Int’l +1 972 840.4989
FAX [phone]
Int’l +1 972 840.1750
ATLANTA, USA
US 1 877 676.4223
Int’l +1 770 516.9488
FAX [phone]
Int’l +1 770 516.7794
MIAMI, USA
US 1 800 595.429
Int’l +1 305 594.3396
FAX [phone]
Int’l +1 305 594.3309
SANFORD,USA
US 1 800 786.9049
Int’l+1 919 775.4584
FAX [phone]
Int’l +1 919 775.4584
TORONTO, CAN
CAN 1 877 848.0818
Int’l +1 905 712.9501
FAX [phone]
Int’l +1 905 712.9502
NEWYORK, USA
US 1 800 431.7884
Int’l +1 631 345.0121
FAX [phone]
Int’l+1 631345.0690
SYDNEY,AUS
AUS 1 800 003.100
Int’l +62 02 9648.2630
FAX [phone]
Int’l +62 02 9548.2635
BUENOS AIRES, ARG
ARG0810 444.2656
Int’l+011 4583.5900
FAX [phone]
MONTEVIDEO,URY
URY 02 902.7206
Int’l+5982 900.8358
FAX [phone]
JOHANNESBURG, S.A.
S.A. +27 11 974.6155
FAX[phone]
MELBOURNE, AUS
AUS 1 800 003. 100
Int’l +62 03 9561.8102
FAX [phone]
Int’l [phone]
CORPORATE
LOS ANGELES, USA

Photo 4
Step 5
Remove the two screws holding the PCR
cleaning brush.
(See Photo 5)
Step 6
Lift out the cleaning brush.
(See Photo 6)
Clean the brush carefully using dry
compressed air.
Step 8
Slide the contact end cap away from the
cartridge.
(See Photo8)
Photo 7
Photo 8
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
2ML 2250 Technical Instructions
Photo 5
Photo 6
Step 4
Remove the top section of the cartridge.
(See Photo 4)
Step 7
Remove the four screws holding the
contact end cap to the cartridge.
(See Photo 7)
Notes

Photo 11
Photo12
Photo 13
Step 12
Note the position of the seven gears locat-
ed behind the end cap. (See Photo 12)
Remove the seven gears.
Step 13
Carefully remove the drum. (See Photo 13)
If you plan on reusing the drum, place it in
aprotected area out of the light.
ML 2250 Technical Instructions 3
Photo 9
Step 9
Rotate the cartridge around. Remove
the four screws holding the gear assem-
bly end cap. (See Photo 9)
Photo 10
Step 10
Slide the end cap away from the cartridge.
(See Photo 10)
Step 11
Remove the PCR from the cartridge.
(See Photo 11)
Notes
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com

Photo 14
Photo 16
4ML 2250 Technical Instructions
Step 14
Release the locking tab that holds the
developer roller end cap.
(See Photo 14)
Step 15
Carefully slide the developer roller out
from the end of the cartridge.
(See Photo 15)
Clean the developer roller using a dry lint
free cloth.
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com
E-mail: [e-mail] Website: www.futuregraphicsllc.com
Photo 15
Step 16
Dump the old toner from the toner hopper.
Clean the hopper using dry compressed
air or a vacuum.
Step 17
Clean the doctor blade using a cotton
swab and Acetone. (See Photo16)
Photo 17 Step 18
Slide the clean developer roller back into
the cartridge. Make sure the developer
roller end cap locking tab snaps into
position.
(See Photo 17)
Photo 18
Step 19
Carefully place the drum back into the
cartridge.
(See Photo 18)
Notes

Photo 21
Photo22
Photo 23
Step 23
Slide the contact end cap onto the end
of the cartridge. Lift up on the PCR saddle
so the shaft of the PCR fits into the
saddle.
(See Photo22)
Step 24
Install the four screws that hold the
contact end cap to the cartridge.
(See Photo 23)
ML 2250 Technical Instructions 5
Photo 19
Step 20
Install the seven gears onto the end of
the cartridge.
(See Photo 19)
Photo 20
Step 21
Slide the gear-housing end cap on to the
end of the cartridge, and install the four
screws that hold the end cap in place.
(See Photo 20)
Step 22
Place the non gear end of the PCR into
the PCR saddle on the gear housing end
cap.
(See Photo 21)
Notes
Need trust-worthy, detailed Technical
Instructions for another engine?
Visit: www.futuregraphicsllc.com

Photo 24
6ML 2250 Technical Instructions
Step 25
Place the PCR cleaning brush into
position. Install the two screws that hold
the brush in place. (See Photo 24)
Step 26
Push the fill plug out from the top of the
cartridge.
(See Photo 25)
Photo 25
Step 27
Place the top cover onto the cartridge.
Install the five screws that hold the cover
in place.
(See Photo 26)
Photo26
Step 28
Fill the cartridge with toner and place the
fill plug into the fill hole.
(See Photo 27)
Step 29
Test the cartridge.
Photo27
Future Graphics (FG) is a distributor of compatible replacement parts and products for imagining equipment.
None of FG's products are genuine OEM replacement parts and no affiliation or sponsorship is to be implied between FG and any OEM.
Notes

Introduced back in July 2004, the Samsung ML-2250 family
of four printers includes the ML-2250, ML-2251N, the
ML-2251NP, and the ML-2252W. Each printer has a duty cycle
of 30,000 pages per month and is capable of printing 22 pagers
per minute at 1200 X 1200 dpi.
The base model ML-2250 sells for $229 which is $70 less than
the HP1150 and its $30 more than the new Lexmark E232. The
network version, ML-2251N, which comes without PostScript
support, and the ML-2251NP, which supports PostScript, sell
for $299 and $349. The fourth printer the ML-2252W has wire-
less networking capabilities and sells for $499.
Dell introduced a MFP machine back in May 2004, based on the
same Samsung engine. The Dell 1600n sells for $399, has a print
and copy speed of 22ppm and prints at 600 x 600 dpi, enhanced
to “1,200 image quality”. Samsungs MFP based on the ML-2250
engine has not yet been released but expect it shortly.
Samsung offers only a high yield cartridge for the Samsung
ML-2250. The ML2250D5 sells for $99.99, holds 125 grams of
toner and yields 5,000 pages at 5% coverage. Dell on the other
hand offers a standard 3,000 page cartridge (part # 310-5416)
as well as a high yield 5,000 page cartridge (part #310-1417)
that sells for $79.95.
Future Graphics (FG) is a distributor of compatible replacement parts and products for imagining equipment.
None of FG's products are genuine OEM replacement parts and no affiliation or sponsorship is to be implied between FG and any OEM.
Remanufacturing the Samsung ML-2250