Samsung SPI-10 User manual

What’s included
IR light projector
User Manual
SPI-10
SPI-30
IR light projector
User Manual
SPI-10
SPI-30
IR light projector User Manual Hex Wrench
Machine Screw Flat-head Washer Spring Washer
Samsung Techwin cares for the environment at all product manufacturing stages to
preserve the environment, and is taking a number of steps to provide customers with
more environment-friendly products.The Eco mark represents Samsung Techwin’s will to
create environment-friendly products, and indicates that the product satisfies the EU
RoHS Directive.
PT01-001106A
www.samsungtechwin.com
www.samsungsecurity.com
SAMSUNG TECHWIN CO., LTD.
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : [phone]~60, FAX : [phone]
SAMSUNG TECHWIN EUROPE LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business Park
Chertsey, Surrey, UNITED KINGDOM KT16 OPS
TEL : [phone], FAX : [phone]
SAMSUNG TECHWIN AMERICA Inc.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Toll Free : [phone] Direct : [phone]
Fax : [phone]
www.samsungcctvusa.com
SALES NETWORK
CAUTION
RISK OF ELECTRIC SHOCK.DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A RISK OF
ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus.
Unplug this apparatus when a card is used. Use caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
FCC STATEMENT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS :
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
Caution
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS
A DIGITAL DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO
PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIP-
MENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.
THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF
NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE
HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A
RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER
WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
10.
11.
12.
13.
14.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of
waste and recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Specifications
Model SPI-30 SPI-10
Floodlighting Distance 70M 100M
LED Angle 30° 10°
Operating voltage AC24V/50Hz/60Hz, DC12V Auto
Power Consumption MAX 22W
Input current MAX 920mA at AC24V/MAX 184mA at DC 12V
Power Cable / Sensor
Contact Output
Brown- AC IN/DC+12V, Blue - AC IN/GND
Violet - Sensor Output, Black- Sensor COM
Temperature / Humidity -40°~50° / 90% RH or less
Dust-proof/
damp-proof IP66
Weight 880g
Dimensions 179(W) X 147.3(H) X 59.5(D)
※ The floodlighting distance is a certain distance at which the IR lighting reaches the
target, and the object identification level may differ depending on the camera type and
settings.
Product Appearance
179
147.3
59.5
83.3
51.6
◆POSITIONING SYSTEM
Put the pan/tilt bracket on the pan/tilt position and use the round hex screw 1/4”-20” to
secure it with the camera housing.
- Power line – the power input line is non-polarity.
Brown : AC24V or DC12V
Blue : AC24V or GND
- Day & Night output line (nonpolarity-relay contact output)
Violet : D&Y - D&Y- signal output.
Black : COM- signal output.
◆Power connection
- Use the BRIGHT volume to adjust the brightness of the IR LED.
If you use the IR LED within 10M from the object, the screen may be saturated. If this is
the case, turn it to L position to adjust the brightness.
Turn it to H (Max) if you use the IR LED beyond 10m from the object.
- Use the SENSOR volume to adjust the illumination of the LED.
However, the sensor volume is already set by factory default so that the LED always turns
on at the H position. Therefore, it is advisable not to adjust it.
※
The IR LED will be activated within 30 minutes before and after the sunset or sunrise.
- If using it in connection with SCU-2370, turn the SENSOR volume to the H (Max) position.
Otherwise, it will not synchronize with SCU-2370.
Note that the Day & Night output line shall be left unconnected.
- By factory default, the BRIGHT volume will be set to H; while the SENSOR volume will be
set to L.
Do not apply excessive force to turn it. Otherwise, it will be damaged or broken.
M
◆Volume control
179(W) X 147.3(H) X 59.5(D)
Installation
◆Housing
Use the provided bolt to fix the lower housing with the bracket.
◆Wall Mounting
Use an electric drill to drill a hole in the wall. Insert a calblock and a screw. Then, tighten the
screw. (Diameter 8mm calblock , 5X30 taping screw (unbundled)
Product Features
1. It enables you to identify objects even at night with no lighting.
2. You can switch between Day/Night camera modes with the built-in sensor.
3. You can use a single or dedicated bracket to attach the product to the positioning
system.
4. It is compatible with both AC24V and DC12V power systems.
5. You can adjust the brightness of the lighting.