Samsung OfficeServ ITP-5121D User manual

ITP-5121D
IP Keyset
User Guide
ITP-5121D KUG 01 03/06 www.samsung.com/bcs
System Feature Codes
Line Groups
9 Local/LCR
800 ____________________________
801 ____________________________
802 ____________________________
Station Groups
501 _____________________________
502 _____________________________
503 _____________________________
504 _____________________________
Paging Zones - Dial 55 plus
0 All Internal Zones
1 _____________________________
2 _____________________________
3 _____________________________
4 _____________________________
5 _____________________________
6 _____________________________
7 _____________________________
8 _____________________________
9 All External Zones
* All External Zones and Internal Zone 0
Programmed Messages - Dial 48 plus
00 Cancel Message
01 In A Meeting
02 Out On A Call
03 Out To Lunch
04 Leave A Message
05 Page Me
06 Out Of Town
07 In Tomorrow
08 Return Afternoon
09 On Vacation
10 Gone Home
11 _____________________________
12 _____________________________
13 _____________________________
14 _____________________________
15 _____________________________
16 _____________________________
17 _____________________________
18 _____________________________
19 _____________________________
20 _____________________________
Feature Access Codes
10 + xxx Pick Up A Parked Call
12 + xxx Pick Up A Held Call
13 Door Lock Release
16 + xxx Speed Dialing
17 Save And Redial Number
18 New Call (Recall)
19 Last Number Redial
400 Cancel Do Not Disturb
401 Set Do Not Disturb
42 + xxx Cancel Message Wait
43 Return Message
44 Callback
45 Busy Station Camp-On
46 Conference
47 Account Code
48 + xx Programmed Messages
49 Send Flash To C.O. or PBX
53 + xxx In/Out of Group
54 Meet Me Page
56 Meet Me Page Answer
600 Cancel All Call Forward
601 + xxx Set Forward All Calls
602 + xxx Set Forward Busy
603 + xxx Set Forward No Answer
604 + xxx Set Fwd Busy/No Answer
605 + xxx Set Forward on DND
606 + xxx Set Forward Follow Me
65 + xxx Pick Up Ringing Extension
66 + xx Group Call Pick Up
67 Universal Answer
* Authorization Code
5121D_TUG.qxp 5/11/2006 8:17 AM Page 1

05/2006
ITP-5121D User Guide
For OfficeServ™ 100, OfficeServ™ 500,
OfficeServ™ 7000 Series
5121d_keyset.qxp 5/9/2006 10:47 AM Page 1

Samsung Telecommunications America reserves the right without prior notice to revise information in
this guide for any reason. Samsung Telecommunications America also reserves the right without prior
notice to make changes in design or components of equipment as engineering and manufacturing
may warrant. Samsung Telecommunications America disclaims all liabilities for damages arising from
the erroneous interpretation or use of information presented in this guide.
Copyright 2006 Samsung Telecommunications America.
All rights reserved. No part of this manual may be reproduced in any form or by any means—graphic,
electronic or mechanical, including recording, taping,photocopying or information retrieval systems—
without express written permission of the publisher of this material.
5121d_keyset.qxp 5/9/2006 10:47 AM Page 2

TABLE OF CONTENTS
ABOUT THIS BOOK ....................................................................................1
THINGS YOU SHOULD KNOW ................................................2–7
ASSEMBLING YOUR KEYSET ........................................................8
ITP-5121D SETUP ..................................................................................9–15
OUTSIDE CALLS
Making an Outside Call................................................................................................16
Answering an Outside Call..........................................................................................16
Universal Answer ..........................................................................................................16
Recall/Flash ......................................................................................................................17
Busy Line Queuing with Callback ............................................................................17
Canceling Callback ........................................................................................................17
INTERCOM CALLS
Calling Other Stations ..................................................................................................18
Answering Intercom Calls ..........................................................................................18
Answer Modes ................................................................................................................18
Busy Station Callback....................................................................................................19
Busy Station Camp-on..................................................................................................19
Calling Your System Operator....................................................................................20
CALL PROCESSING
Holding Calls ............................................................................................................21–22
Transferring Calls ....................................................................................................22–23
Transfer with Camp-On................................................................................................23
Transfer to Voice Mail....................................................................................................23
Call Waiting ......................................................................................................................23
Conference Calls ............................................................................................................24
Forwarding Calls......................................................................................................25–26
Call Pickup ........................................................................................................................27
My Group Pickup............................................................................................................27
Privacy Release................................................................................................................28
5121d_keyset.qxp 5/9/2006 10:47 AM Page 3

DIALING FEATURES
Speed Dialing ..................................................................................................................29
Programming Personal Speed Dial Numbers ..............................................29–30
One Touch Speed Dialing............................................................................................30
Last Number Redial ......................................................................................................30
Manual Retry with Redial ............................................................................................31
Save Number with Redial............................................................................................31
Chain Dialing....................................................................................................................31
Automatic Redial/Retry................................................................................................31
Pulse to Tone Changeover ..........................................................................................32
Memo Redialing..............................................................................................................32
PAGING AND MESSAGING
Making an Internal Page..............................................................................................33
Making an External Page ............................................................................................33
All Page ..............................................................................................................................33
Meet Me Page..................................................................................................................34
Call Park and Page..........................................................................................................34
Messages—Set and Cancel ........................................................................................35
Returning Messages......................................................................................................35
Programmed Messages................................................................................................36
CONVENIENCE FEATURES
Do Not Disturb ................................................................................................................37
One Time DND ................................................................................................................37
Mute ....................................................................................................................................37
Background Music ........................................................................................................37
Established Call Pick-Up ..............................................................................................38
Appointment Reminder/Alarm Clock ....................................................................38
Door Phone Calls............................................................................................................39
Executive/Secretary Hotline ......................................................................................39
Group Listening ..............................................................................................................40
Account Codes ................................................................................................................40
Locking Your Keyset ......................................................................................................40
Manual Signalling ..........................................................................................................41
Off-Hook Voice Announce ..........................................................................................41
OHVA Block ......................................................................................................................42
OHVA Reject ....................................................................................................................42
In Group/Out of Group ................................................................................................42
5121d_keyset.qxp 5/9/2006 10:47 AM Page 4

CUSTOMIZING YOUR KEYSET
AME Password ................................................................................................................43
Auto Camp-On ................................................................................................................43
Select Ring Tone ............................................................................................................43
Change Your Passcode ................................................................................................43
Set Answer Mode (Intercom) ....................................................................................44
Set Answer Mode (CO) ................................................................................................44
Automatic Hold ..............................................................................................................44
Headset Operation ........................................................................................................44
Hot Keypad ......................................................................................................................45
Key Confirmation Tone ................................................................................................45
Rejoining a Page ............................................................................................................45
Ring Preference ..............................................................................................................45
Auto Answer CO Calls ..................................................................................................46
Display Speed Dial Name............................................................................................46
Caller ID Review All........................................................................................................46
Secure OHVA ....................................................................................................................46
Enblock Dialing ..............................................................................................................47
DISPLAY FEATURES
Interactive Display Keys ..............................................................................................48
Directory Information ................................................................................................ 48
Call Log ..............................................................................................................................49
Dial by Name....................................................................................................................49
Call Progress Displays ..................................................................................................50
Display Number Dialed................................................................................................50
Call Duration Timer........................................................................................................50
Auto Timer ........................................................................................................................50
Timer Function ................................................................................................................50
Viewing Message Indications ....................................................................................51
Alarm Reminder Messages..................................................................................51–52
Personal Speed Dial Names........................................................................................52
Station Names .................................................................................................................52
Managing Key Assignments .......................................................................................53
LCR with Clear .................................................................................................................53
Backspace with LCR ......................................................................................................53
Text Messaging ......................................................................................................54–55
Caller ID .....................................................................................................................56–60
ANI .............................................................................................................................57–60
CLI ..............................................................................................................................57–60
5121d_keyset.qxp 5/9/2006 10:47 AM Page 5

SPECIAL APPLICATION MENU ..................................................61
Menu Options.........................................................................................................61–63
Outgoing Call Log ....................................................................................................61
Incoming Call Log ...................................................................................................61
Speed Dial...................................................................................................................62
Directory Dial ..........................................................................................................62
Forward Set .........................................................................................................62
Alarm Reminder .......................................................................................................63
SVMi E-Series....................................................................................................64
Accessing your Mailbox ............................................................................................65
SVMi E-Series Subscriber Services Menu Diagram ....................................66–67
Getting Started ...............................................................................................................68
Listen to your Messages .............................................................................................68
Subscriber Services Menu .........................................................................................68
Listening to Old or New Messages .........................................................................69
Group New or Old Messages .....................................................................................70
Record and Send a Message ..............................................................................70–71
Access Manager ......................................................................................................71–73
Personal Greetings ................................................................................................73
Mailbox Administration .......................................................................................75
Message Broadcast ......................................................................................................77
Personal Services ....................................................................................................78
Personal Administration Settings ............................................................................79
Keyset User Features ....................................................................................................80
Shortcuts ..........................................................................................................................82
Interactive Displays .......................................................................................................82
PERSONAL SPEED DIAL NUMBERS ............................83–84
5121d_keyset.qxp 5/9/2006 10:47 AM Page 6

ABOUT THIS BOOK
Samsung’s new OfficeServ Technology keyset model, ITP-5121D, is part of the
OfficeServ 100, OfficeServ 500, and OfficeServ 7000 Series.
The ITP-5121D IP keyset represents a new concept of Internet phone,in that it uses
an IP address to Send/Receive voice and data. For voice communications, the ITP-
5121D uses the data network line already in place in most offices and increasing
number of homes.
The ITP-5121D keysets incorporate an LCD screen, which provides important infor-
mation for the user, to make using the keyset easier and more convenient.
Your keyset is the most visible part of your telephone system. Please take the time
to study this guide and to become familiar with the operation of your keyset. Keep
this guide handy, as you may need to look up instructions for infrequently used
features.
Learning to use your keyset correctly will make everyday telephone communica-
tions a breeze.
This book is written based on the factory default settings for the feature access
codes. Sometimes, due to programming requirements, these codes may be
changed. If you find that a feature code does not work as described in this book,
please contact your installation and service company to determine the correct
code.
1
5121d_keyset.qxp 5/9/2006 10:47 AM Page 7

2
THINGS YOU SHOULD KNOW
USER ORIENTATION
The ITP model telephones are called IP keysets.The IP keyset incorporates buttons
or“keys”that are used to access or activate the many features of your office phone
system. The ITP-5121D keyset incorporates 21 programmable buttons. These 21
buttons are arranged in three rows of seven across the face of the keyset. Any of
the system features or functions can be programmed to these buttons.
The three buttons above the top row of programmable buttons are soft keys.
These buttons assist in the use of the system features and functions.
Lines from the telephone company are“C.O. lines.”Calls on these lines are referred
to as “outside calls.”Your system can have individual C.O. line keys or lines may be
assigned to groups. When they are in a group, you access a line by dialing an
access code or pressing a route button. For example, dial 9 or press a“LOCAL” but-
ton to get a local outside line. If Least Cost Routing is used, pressing the “LCR” but-
ton will automatically select a preprogrammed C.O. line according to what digits
are dialed. Each line in the system is numbered, beginning with 701, then 702, 703,
etc.
Direct Station Selection (DSS) buttons are programmed to ring specific stations.
You can press a DSS button instead of dialing the extension number.
CALL INDICATIONS
The buttons on your phone have light emitting diodes (LEDs).These are tri-colored
LEDs that light green, red or amber (green and red together).
Intercom calls, also called internal calls, always appear on your CALL buttons. They
will always light green.You can have up to eight CALL buttons, but at least two are
recommended.
Outside calls appear on individual line buttons if they are assigned.When an indi-
vidual line is not assigned to its own button, it will appear on a CALL button.
Your outside calls will light green on your keyset and red on other keysets. You
never lose sight of your calls while they are on hold.They stay right where you put
them and are identified with a green flashing light.
5121d_keyset.qxp 5/9/2006 10:47 AM Page 8

3
Some simple rules to remember:
• Any steady LED indicates the line or feature is in use.
• A fast flashing green LED indicates a new call ringing in.
• A slow flashing green or red LED indicates a call is on hold.
• A slow flashing amber LED indicates a recall to your keyset.
FULL DUPLEX SPEAKERPHONE
All ITP keysets are speakerphones. Pressing the SEND button will answer an
incoming call on the speakerphone. Pressing the END button will release the call
on the speakerphone.
Switching from the handset to the speakerphone is easy. Simply press the SPEAK-
ER button and hang up the handset.
VOLUME CONTROLS
The ITP-5121D keyset uses the UP and DOWN buttons to adjust the ringer volume
while the keyset is ringing, the speaker volume while the speakerphone is in use
and the handset volume while you are listening. These three levels will be stored
in memory until changed. If background music is turned on at your keyset, the vol-
ume buttons will also control the level of music. The volume of pages heard
through the speaker of a keyset can be adjusted during a page announcement by
using the volume buttons.There are 16 levels for each volume setting.The volume
of off-hook ring is controlled by a user-programmable setting.
TERMINAL STATUS INDICATOR
The terminal status indicator light is positioned on the top right corner of the key-
set above the display. The terminal status indicator is a tri-colored (red, green, and
amber) light that provides greater visibility of your keysets status than the indi-
vidual button LEDs. The terminal status indicator provides the following indica-
tions:
• Busy/Off Hook Steady Red
• Intercom Ring Flashing Red
• Outside Call Ring Flashing Green
• Recall Ring Flashing Amber
• Message Waiting Flashing Red
• Do Not Disturb Fast Flash Red at 1 Second Intervals
5121d_keyset.qxp 5/9/2006 10:47 AM Page 9

CONFERENCE BUTTON
The CONFERENCE button allows the user to set up a call with up to 5 parties (sta-
tion or trunk).
TRANSFER BUTTON
Transfer is used to send any call to another extension in one of two ways.You can
do a screened transfer by informing the other extension who is calling or you can
do a blind transfer without notification.
HOLD BUTTON
The HOLD button maintains the call at your keyset, while enabling you to call
other stations or consult coworkers in confidence.
SPEAKER BUTTON
The SPEAKER button allows you to have a conversation from the keyset without
lifting the handset.
NAVIGATION BUTTON
The ITP-5121D keyset incorporates a NAVIGATION button. This button is
designed to assist the user in activating and using various station features, more
easily. These features include:
• Outgoing Call Log
• Incoming Call Log
• Speed Number Search
• Name Search
• Call Forward Assign
• Alarm Assign
With the NAVIGATION button the station user is no longer required to enter sta-
tion level programming to activate these frequently used features. A few button
presses and these features are activated.
The NAVIGATION button is divided into separate feature buttons.These buttons
are described below.
•MENU BUTTON: This button displays the station feature main menu so that
the users can easily utilize various settings and helpful functions.
4
5121d_keyset.qxp 5/9/2006 10:47 AM Page 10

•SEND BUTTON: If the station is programmed for Enblok Dial Mode, when
dialing an outside telephone number or internal station number, you must
press the SEND button to initiate the call. This button is also used when
reviewing recently received or called numbers and answering incoming calls.
When reviewing recently received calls, continue to press the SEND button
for more than 2 seconds and the last outside number called will be redialed.
The SEND button operates as the ANS portion of the ANS/RLS button. An
ANS/RLS button may be assigned to the station as a programmable button.
•ENTER BUTTON: This button is used to select a menu option, or to save
changes made to a menu or submenu option.
•DIRECTION BUTTON: The DIRECTION BUTTON is the donut shaped ring,
which surrounds the ENTER button. This button is used to navigate within
the menus.There are directional arrows stenciled into this button, which indi-
cate which direction the cursor will be moved.
•END BUTTON: This button is used to disconnect a call after a conversation or
to move to the initial screen.
The END button operates as the RLS portion of the ANS/RLS button. An
ANS/RLS button may be assigned to the station as a programmable button.
•CANCEL BUTTON: This button is used to erase any characters or numbers
entered by the dial pad or to move to the previous screen.
FEATURE ACCESS CODES
This user guide is written based on the default access code for using system fea-
tures. If the system numbering plan has been changed some of the access codes
may not be correct.Your installing company can inform you of the correct codes.
5
5121d_keyset.qxp 5/9/2006 10:47 AM Page 11

6
SYSTEM TONES
The system provides several tones to assist you. Some of these tones are already
familiar to you.
Intercom Dial Tone—A steady tone that indicates you can begin dialing.
DIAL TONE
CONTINUOUS
Ringback Tone—Indicates the station you dialed is ringing.
RINGBACK TONE—1000 ms ON/3000 ms OFF
CONTINUOUS
Busy Tone—Indicates the station you dialed is busy.
BUSY TONE—500 ms ON/500 ms OFF
CONTINUOUS
DND/No More Calls Tone—Fast busy tone indicates the station you dialed
is in the Do Not Disturb mode or cannot receive any more calls.
DND/NO MORE CALLS TONE—250 ms ON/250 ms OFF
FOR TEN SECONDS
Transfer/Conference Tone—Indicates your call is being held and you
can dial another party.
TRANSFER/CONF TONE—100 ms ON/100 ms OFF
CONTINUOUS
Confirmation Tone—Very short beeps followed by dial tone indicate you
have correctly set or canceled a system feature.
CONFIRMATION TONE—50 ms ON/50 ms OFF FOR ONE SECOND
(programmable)
Error Tone—A distinctive two level beeping tone indicates you have done
something incorrectly.Try again.
ERROR TONE—50 ms of tone 1/50 ms of tone 2
FOR THREE SECONDS
5121d_keyset.qxp 5/9/2006 10:47 AM Page 12

7
ITP-5121D
LCD Panel
Soft Button
Scroll Button
Status Indicator
Keyset
Navigation
Button
Microphone
Conference Button
Transfer Button
Hold Button
Speaker Button
Dial Button
Redial
Button
Volume
Button
Speaker
Programmable Buttons (21)
Support
5121d_keyset.qxp 5/9/2006 10:47 AM Page 13

8
ASSEMBLING YOUR KEYSET
• Place the keyset face down on a flat surface.
• Insert notched ends of the support bracket into the channels located in the
upper section of the bottom panel. Push towards the top of the keyset to lock
in.
• Plug the handset cord into the jack marked with the symbol.
• Route the handset cord out the RIGHT side of the keyset as you look at it face
down.
• Plug an eight-conductor ethernet cable, from the wall, into the jack marked
LAN on the back of the keyset. (Connect the ITP keyset to any port on the local
network).
• If your ITP will share LAN connection with a PC, plug an eight-conductor eth-
ernet cable, from the PC, into the jack marked PC on the back of the keyset.
• Plug the power connector, from the power adapter provided, into the power
jack on the back of the keyset. The power adapter is not required if the ITP is
connected to a LAN connection that provides power over the ethernet. The
ITP-5121D supports the power over ethernet feature when it is connected to
a IEEE 802.3af compliant LAN switch or power injector port.
IMPORTANT NOTE:
• Be careful not to connect the Network LAN cable into the PC connector of the
phone.
• To prevent damaging the keyset, only use the Power Adapter that came with
the 5121D keyset.
• This manual assumes that the ITP keysets are connected to a functioning local
IP network. The local IP network must be able to communicate with the MCP
and MGI card in the OfficeServ 100, OfficeServ 500, or in the OfficeServ 7000
Series systems over IP. This is assumed regardless of whether the IP keyset is
on a local or remote network.
5121d_keyset.qxp 5/9/2006 10:47 AM Page 14

>1.SYSTEM EASY WIZARD
2.SYSTEM INFORMATION
3.NETWORK SETUP
4.LOAD & UPGRADE SETUP 5.SYSTEM SERVER SETUP
6.FACTORY RESET
9
ITP-5121D SETUP
INITIALIZING THE ITP-5121D
Initially the ITP-5121D IP keyset will need to be setup to operate within the users
network.The Setup Menu is also used to make changes to the keyset, in the event
that the system information should change. The option chosen via scroll key will
be highlighted.
The station numbers will be automatically set by the OfficeServ 100, OfficeServ
500, and the OfficeServ 7000 Series systems once the necessary information has
been entered into the IP keyset. Enter ID and password of the server, as described
below to register the phone.
See your system administrator for specific Network and Server addresses. The
addresses necessary to set up the ITP-5121D are:
• IP Address of the ITP
• Network Gateway Address
• Subnet Mask
• IP Address of System’s MCP
• User ID
• Password
To get to the Set-Up Menu, unplug the power from the ITP-5121D phone or
unplug the LAN cable if using Power over Ethernet, press and hold the MENU but-
ton while plugging in the power cord or LAN cable if using Power over Ethernet
back into the phone. Now release the MENU button.
Other items not shown on screen when scrolling down (press down arrow on nav-
igation disc).
6.FACTORY RESET
7.REBOOT
5121d_keyset.qxp 5/9/2006 10:47 AM Page 15

IP SETUP MENU
To enter the IP SETUP MENU, press the MENU button as soon as the ITP-5121D
phone is connected to the power supply or Power over Ethernet LAN port.
When entering the IP setup menu, the LCD displays the following options:
Other items not shown on screen when scrolling down (press down on navigation
disc):
Once the IP SETUP MENU is displayed, you can move to each menu in the Set Up
by using the navigation buttons.
• The UP and DOWN directions buttons in the navigation button assembly are
used to move the highlighted bar up or down to the desired option.
• The LEFT and RIGHT buttons in the navigation button assembly are used to
move the highlighted bar left or right, to the desired option, move to a sub
menu and if a menu is at the last line, that menu option will be executed.
• The [0]-[9] dial buttons are used to directly choose a menu, or sub menu
options.
• The [ENTER] button in the navigation button assembly is used when saving
a modification.
• The [MENU] button in the navigation button assembly is used to to display
the IP Setup Main Menu.
•The[END] button in the navigation button assembly is used when canceling
or editing the modification, or existing programming.
•The[CANCEL] button in the navigation button assembly is used to go back
to the previous screen or to delete the last digit of a displayed option value.
>1.SYSTEM EASY WIZARD
2.SYSTEM INFORMATION
3.NETWORK SETUP
4.LOAD & UPGRADE SETUP 5.SYSTEM SERVER SETUP
6.FACTORY RESET
10
6.FACTORY RESET
7.REBOOT
5121d_keyset.qxp 5/9/2006 10:47 AM Page 16

MENU STRUCTURE
The IP SETUP MENU is configured as follows:
1. SYSTEM EASY WIZARD
This option will guide you through setting up all required parameters for con-
necting the ITP keyset to your system.
2. SYSTEM INFORMATION
1. Version Info: Provides boot rom, software, DSP, and hardware version
information.
2. Network Info: Displays network mode, IP address of phone, network, and
gateway information.
3. Netmask
4. Gateway
Note that items 2 to 4 are only displayed when setting Manual IP.
3. NETWORK SETUP
This menu allows you to individually setup the same parameters found in the
Easy Wizard.
4. LOAD & UPGRADE SETUP
1. Upgrade TFTP Server:The IP address of theTFTP server containing the ITP
software.
2. Upgrade Start: Starts the ITP software upgrade process.
5. SYSTEM SERVER SETUP
1. Server IP Address:The MCP’s IP address.
2. Server ID: The ID assigned to your ITP (see your phone administrator for
this information).
3. Server Pass:The password assigned to your ITP (see your phone adminis-
tratror for this information).
6. FACTORY RESET
This option resets ITP to factory default settings.
7. REBOOT
This option reboots the ITP.
11
5121d_keyset.qxp 5/9/2006 10:47 AM Page 17

NAVIGATING THE MENUS
When programming within various menu options,information can be entered via
the dial pad keys using [0]-[9] and [] dial keys, as well as utilizing the navigation
button assembly.
The button used for editing and their features are summarized below.
BUTTON FEATURES
Left and Right ......................To move a cursor (highlighted area) or to erase what is
entered.
Enter ........................................To save the current setting and end programming.
End............................................To cancel the current programming and return to the
Main Menu.
Cancel......................................To move back to the previous screen or delete the last
digit of the displayed option value.
[] ............................................To enter [.] between IP address fields.
[0]-[9] ......................................To enter numerical values.
SETTING THE NETWORK PARAMETERS
Utilize the following programming steps to program the ITP-5121D keyset to
operate within the users network.
Network Parameter Setup
From the Setup, Main Menu, select [3. NET-
WORK SETUP] to set or modify the network
parameters.
Select the Network Mode Setup and press
ENTER, the LCD will display this message.
•If[1. MANUAL IP] is selected, the user must enter the IP address of the IP key-
set. Then enter the subnet mask, and gateway value for the customer net-
work.
•If[2. DHCP] is selected, the IP address, subnet mask, and gateway value will
be obtained automatically (if a DHCP server is present).
3.NETWORK MODE SET UP
>1.MANUAL IP
2.DHCP
12
5121d_keyset.qxp 5/9/2006 10:47 AM Page 18

Setting IP Manually
• From the “Network Mode Setup” Menu,
select [1. MANUAL IP] and press ENTER.
Next, press the END button to get to the
NETWORK SETUP MENU as seen here.
Enter the IP address of the IP keyset.Next, enter the netmask and gateway address
for the customer network.
• If the [2. IP ADDRESS SET UP] menu is
selected, press ENTER, the LCD will dis-
play this message and the user can
enter its IP address.
Check if there is any currently saved IP address of the phone on the LCD. If the IP
address has not been set, the LCD displays nothing. The user can enter the IP
address using [0]-[9] dial buttons and [] button for entering a “.” Save that IP
address by pressing the [Enter] button of navigation button assembly.
• If the [3. NETMASK SET UP] menu is
selected, press ENTER, the LCD will dis-
play the following message and the
user can enter a new Netmask IP
address.
Check if there is any currently saved subnet mask address of the phone on the
LCD. If the subnet mask address has not been set, the display will show nothing.
Press any dial buttons from [0]-[9] and [] button to enter the subnet mask IP
address and then save that subnet mask IP address by pressing the [Enter] button
of navigation button assembly.
• If the [4. GATEWAY SET UP] menu is
selected, press ENTER, the LCD will dis-
play the following message and the user
can enter a new gateway address.
Check if there is any currently saved Gateway IP address of the phone on the LCD.
If the gateway IP address has not been set, the LCD displays nothing.The user can
enter the gateway IP address by using [0]-[9] and [] button and can save that IP
address by pressing the [ENTER] button of the navigation button assembly.
1.NETWORK MODE SET UP
2.IP ADDRESS SET UP
3.NETMASK SETUP
4.GATEWAY SETUP
INPUT IP ADDRESS & PRESS OK
xxx.xxx.xxx.xxx
INPUT NETMASK & PRESS OK
xxx.xxx.xxx.xxx
INPUT GATEWAY & PRESS OK
xxx.xxx.xxx.xxx
13
5121d_keyset.qxp 5/9/2006 10:47 AM Page 19