Samsung RSG5UCRS Installation guide

Samsung Fridge Filters: Everything
You Need to Know to Replace Your
Samsung Fridge Filter at Home
1. How to Replace an RSG5UCRS Samsung Fridge Filter
2. How to Replace a DA29-00003F Water Filter
3. How to Reset the Water Filter Indicator Light on a Samsung Fridge
4. How to Replace a DA29-00003G Samsung Fridge Filter
5. Why You Need to Change Your Fridge Filter Every 6 Months
Samsung is one of the largest companies in the world. With its headquarters in Samsung
Town in Seoul, South Korea, the tech firm was originally founded as a trading company, but
launched into the electronics market in the 1970s.
In 2015, Samsung announced it wanted to become the globe's largest appliance maker. As
you’d imagine, this was a major goal and meant it would need to surpass many well-known
multinationals, such as Whirlpool,Bosch, and Electrolux.
Samsung came up with the notion to win the battle through their smart home designs. More
advanced than anything other household brands were producing, Samsung’s range of home
appliances would include refrigerators that dispensed sparkling, as well as still, purified
drinking water. It would also feature several different compartments where water could be
cooled to different temperatures — something never seen before.
While they might not be quite at the top of the leaderboard just set, Samsung is certainly one
of the major appliance makers in the world. Their fridges are incredibly popular, not only for
their ability to keep food chilled and fresh, but also for the way they revolutionise plain old
drinking water.
One of the reasons water tastes so much better when it comes out of a Samsung fridge is
because of its advanced filtration system. Samsung’s water filters leverage the latest
technology to filter as many impurities as possible out of the regular water piped into your
home, leaving you with amazing quality water that tastes just as good as the bottled stuff.
To continue drinking great water at home, it’s essential you regularly replace your Samsung
water filter. Don’t change it often enough (or worse — don’t change it at all) and your water

filter will become completely ineffective after some months, leaving you with unpleasant
tasting drinks you’ll be embarrassed to serve your friends and family.
So you can continue to be proud of your delicious brews, fresh water, and crystal-clear ice,
we’ve put together a quick guide on everything you need to know about replacing your
Samsung fridge filter at home.
1. How to replace an RSG5UCRS Samsung Fridge Filter
If you’ve never replaced your RSG5UCRS Samsung Fridge Filter before, we’ve got some
good news for you — it’s easier than you think.
When the filter indicator light turns orange or pink, it’s time to purchase a new filter. When it
turns red, it’s time to change the filter. If six months has passed and the indicator light hasn’t
turned red, we still recommend changing the filter to maintain the high quality of your
drinking water.
Around 90% of the American-style fridge freezers have an internal water filter. The following
instructions refer to replacing internal filters only. Scroll down for instructions on how to
replace an external filter.
1. Remove the old water filter by twisting it 45° to the left to unlock
2. Gently pull the old water filter out and discard it — the water will shut off automatically
at this point
3. Push the new water filter into the space and turn it 45° to the right
4. If the padlock symbol matches up with the symbol on the filter, it’s in the correct
position
5. After installing the new filter, press the water filter reset button for 3 seconds to reset
the light indicator
Extra tips
If you’re struggling to remove the water filter, the problem could be a build up of water
pressure behind the filter. Try removing the top 2 fridge shelves and pull the filter harder to
remove it.
If you can’t get the new filter to fit in the space, close the water supply valve and dispense a
little bit of water. This will lower the pressure, making it easier to install the new filter.
The following instructions are for external filters only. Only around 10% of Samsung
RSG5UCRS fridge freezers have external filters. Scroll up for instructions on how to replace
an internal filter.
1. Shut off the water supply
2. Disconnect the old cartridge from the system and dispose of it
3. Align the water filter with the arrow flow mark toward the fridge
4. Connect the inlet and outlet tubing to the appropriate end of the filter by firmly
pushing the tubing all the way until it’s tightly sealed
5. Ensure the tubing is square and scratch-free — you can trim it if necessary

6. Follow the instructions in the installation manual to insert the filter clip
7. Turn on the water and check the filter for leaks
8. If there are leaks, repeat the installation steps and check again
9. If leaks persist, remove the filter and call for support
10. Let water flow through the filter for five minutes, to clean the system
2. How to Replace a DA29-00003F Water Filter
The DA29-00003F water filter replaces the DA29-00003G, DA29-00003B, and
DA29-00003A. It is not a replacement for the superior DA29-00003G and is not
interchangeable with that advanced filter.
The following instructions are to replace an internal DA29-00003F water filter.
1. Remove the old water filter by twisting it 45° to the left to unlock
2. Gently pull it out and discard it — this will shut the water off automatically
3. Push in the new water filter and turn it 45° to the right to lock it into place
4. If the padlock symbol matches up with the symbol on the water filter, you’ve done it
correctly
5. Press the water filter reset button for 3 seconds to reset the water filter indicator
Extra tips
If you’re struggling to remove the water filter, the problem could be a build up of water
pressure behind the filter. Try removing the top 2 fridge shelves and pull the filter harder to
remove it.
If you can’t get the new filter to fit in the space, close the water supply valve and dispense a
little bit of water. This will lower the pressure, making it easier to install the new filter.
3. How to Reset the Water Filter Indicator Light on a Samsung
Fridge
Every Samsung fridge which has a water filter also has a water filter indicator, telling you
when it’s time to replace the water cartridge. Even if the light doesn’t change colour, it’s
always a good idea to replace the filter once every six months to carry on drinking the same
top quality water you’ve grown to love.
If you don’t change your water filter regularly, it won’t work. Instead of great tasting, pure
water, you’ll be stuck with odd tasting water that potentially contains unwanted contaminants.
Here are the different colours you’ll see on your water filter indicator and what they each
mean.
Blue: Your water filter is doing its job correctly
Pink/Orange: Your water filter is five months old and you should purchase a new one soon
Red: Your water filter is no longer functional and it’s time to replace it with a new one

How to reset the indicator
Follow the instructions on installing the new water filter above. Reset the indicator light by
pressing and holding the "Alarm / Hold for 3 seconds to Reset Filter" button. If your model
has an inside control panel, hold the "Power Cool" and "Fridge" buttons simultaneously for 3
seconds. This will reset the indicator light back to blue.
4. How to Replace a DA29-00003G Samsung Fridge Filter
The following instructions are for internal filters only. The Samsung DA29-00003G water
filter is always internally fitted.
1. To remove the old water filter, twist it a quarter turn to the left to unlock
2. Gently pull out the old water filter and discard — this will shut the water off
automatically
3. Push in the new water filter and turn it a quarter turn to the right
4. If the padlock symbol matches up with the symbol on the water filter, you’ve fitted it
correctly
5. Following installation, press the water filter reset button for 3 seconds to reset the
water filter indicator.
Extra tips
If you’re struggling to remove the water filter, the problem could be a build up of water
pressure behind the filter. Try removing the top 2 fridge shelves and pull the filter harder to
remove it.
If you can’t get the new filter to fit in the space, close the water supply valve and dispense a
little bit of water. This will lower the pressure, making it easier to install the new filter.
5. Why You Need to Change Your Fridge Filter Every 6 Months
You might think you only need to change your fridge filter every time the indicator light
recommends it — but that’s not true. Waiting until the light turns red can be dangerous for
your health.
A water filter stops contaminants passing from the pipes into your drinking water. When the
water filter is no longer effective, all the contaminants which have been trapped can now
pass through into your drinking water, making it even dirtier than if you didn’t use any water
filter at all.
Each Samsung water filter uses an activated carbon filter media that is certified for use with
a limited quantity of water before you need to change the cartridge out. This amount of water
is usually what an average household will go through every six months.

The activated carbon filters out contaminants from water by absorbing them. As the water
passes through the filter, it captures impurities and makes them stick to the surface of the
carbon.
When there’s no surface area available to absorb new contaminants, the filter's capacity has
been reached. At this point, many contaminants in the water will simply flow past the filter
into your drinking water.