SAN HIMA SAND-FLAG User manual

USER MANUAL
SAND FLAG
MODEL: SAND-FLAG

ABOUT US
Founded in 2018, the San Hima brand stands for passion and enthusiasm for exploring the
spectacular nature of the great outdoors. Since its inception, the trusted solutions and proven
designs that San Hima offers to the market have made adventure and travelling flexible and
enjoyable!
Based in Australia, San Hima has under its umbrella a wide selection of outdoor solutions,
including cargo systems, vehicle protection accessories and tow & trailer parts, that are designed
to help you carry your gear wherever your passion takes you and boost your performance when
conquering the peaks!
At San Hima, we have wild souls and we are committed to designing products that are tough
enough to take on any adventures and at the same time, making them safe and easy to use. These
values in our conviction are what drive us to make innovations. Since pursuit your passion
shouldn't be complicated.
Live the Peak, Conquer the Everest, San Hima is your brand of choice!
SAFETY PRECAUTIONS
Always check local regulations before using this product to ensure flag size, height and colour are
compliant.
Ensure vehicle mounting location is strong enough to fit your sand flag.
Make sure the sand flag is secured before your vehicle starts.
Always remove your sand flag when driving faster than the rated maximum speed 60km/h.

PACKAGE CONTENTS
1 x Fluorescent Flag 3 x Poles
2 x Caps 2 x Flag Bases 2 x Zip Ties
SPECIFICATION
Product Weight: 1.84kg
Tube Length: 3000mm | 3 Sections 1000mm
Tube Diameter: 15mm
Flag Size: 300 x 300mm
Pole Material: Fibreglass
Joint Material: Aluminum
INSTALLATION
1.Insert pole through the flag.①
①
③
②

2.Use zip ties to secure the flag. 3.Connect pole 1 to pole 2, pole 2 to pole 3.
4.Insert base (for more bumpy driving)
or base② (for less bumpy driving) into the
mounting hole on the bull bar or roof rack
of your vehicle. Tighten the washer and
the nuts.
①
①②
CLEANING AND STORAGE
5.Connect the pole to the base.
Use a non abrasive fibre brush or sponge with mild pH neutral soapy water to wash the sand flag.
Rinse thoroughly after cleaning.
Always rinse your sand flag and fittings thoroughly in fresh water when using in a corrosive
environment like beach driving.
Ensure the flag is completely dry before packing away.
①②

WARRANTY
WARRANTY PERIOD:
San Hima warrants that each of our sand flag that is purchased while this Warranty is in effect will be
free from defective workmanship and materials for a period of 3 years.
WHAT DOES THE WARRANTY COVER?
Under normal usage conditions, this warranty covers:
Any defect in design or manufacture which results in its failure to perform correctly as described.
Damage or loss incurred in transit.
We will either replace the product or provide you with a refund at our discretion provided that the
fault is found to have been caused by a design or manufacturing defect and not misuse or tampering.
Shipping costs of returning the product for a proven defect.
The limited warranty is the only one that applies to this unit, and it sets forth all the responsibilities
of San Hima.
THE WARRANTY DOES NOT COVER:
Travel and /or other expenses due to customer's location.
Damage caused by adverse weather, extreme temperature, accidents, negligence, daily wear
and tear, alteration, incorrect installation, improper use such as installing the sand flag at a vehicle
mounting location which is not strong enough or driving your vehicle with the sand flag faster than
60km/h.
This unit is not intended for commercial use.
1.
2.
3.
4.
5.
1.
2.
3.