SAN HIMA SH-TENT-SY20 User manual

USER MANUAL
SHOWER TENT
SKU: SH-TENT-SY20
V1.1

ABOUT US
Founded in 2018, the San Hima brand stands for passion and enthusiasm for exploring the
spectacular nature of the great outdoors. Since its inception, the trusted solutions and proven
designs that San Hima offers to the market have made adventure and travelling flexible and
enjoyable!
Based in Australia, San Hima has under its umbrella a wide selection of outdoor solutions,
including cargo systems, vehicle protection accessories and tow & trailer parts, that are designed
to help you carry your gear wherever your passion takes you and boost your performance when
conquering the peaks!
At San Hima, we have wild souls and we are committed to designing products that are tough
enough to take on any adventures and at the same time, making them safe and easy to use. These
values in our conviction are what drive us to make innovations. Since pursuit your passion
shouldn't be complicated.
Live the Peak, Conquer the Everest, San Hima is your brand of choice!
1

SAFETY INSTRUCTIONS
In windy conditions it is highly recommended not to erect the shower tent as personal injury
and / or property damage may occur.
Select a level site clear of rocks, branches, and other hard or sharp objects, to set up your
shower tent.
Do not set up your shower tent under trees because of potential lightning strikes or falling
tree limbs in inclement weather.
Do not cut or modify the shower tent or mounting accessories.
Do not exceed the vehicle manufacturer's weight limits.
Do not use damaged or excessively worn products.
Keep exits clear.
Remain cautious when pegs are in use.
Keep an eye out for children when the shower tent is in use.
Stow away the shower tent before operating the vehicle.
2
KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS SHOWER TENT.
Do not operate any devices which burn fuel inside the shower tent.
Do not smoke in or near the shower tent.
Do not cook inside the shower tent.
Keep a look out for any airborne burning embers that may come in contact with the tent.
Keep a fire extinguisher or bucket of water nearby.
IMPORTANT FACTS
Under certain conditions (cold weather, high humidity, etc.) condensation will form on the
inside of your shower tent. Condensation is caused by water vapor from your breath,
perspiration, or any wet clothing inside the shower tent. It is NOT LEAKAGE through the
fabric. It can be minimized by removing wet clothing from your shower tent and by providing
good ventilation through the shower tent.
CARE AND MAINTENANCE
To extend the life of your tent, it is recommended to pack it up when not in use.
When it is time to pack up, check that fabric is dry and free from dirt and debris, then reverse
the set up process.
Do not pack pegs inside your shower tent. Use the provided accessory storage bag.
If your shower tent requires cleaning, we recommend to use lukewarm soapy water and a
clean sponge to wipe down the material. Do not use abrasive cleaners or bleach.

SPECIFICATIONS
Open Size Shower Tent)(
Closed Size Storage Bag)(
Product Weight
Shower Tent
Material
Water Column
UV Resistant
LED Light
Rated Voltage
Rated Power
Lumens
Connector
94cm x 94cm x 176cm
105 x 13 x 13cm
7.3kg
420D Ripstop Oxford
2,000mm
Yes
5V
10W
867lm
USB Type A
3
Travel Bag
Material
Water Column
UV Resistant
650D PVC
8,000mm
Yes
Frame
Material 6063-Grade Aluminium
L Brackets & Sandwich Plates
Material Powder Coated Steel
PACKAGE CONTENTS
Shower Tent with Travel Bag x1
L Brackets x2
Sandwich Plates x2
Elastic Hanging Rope x1
Wrenches x2
Mounting Hardware Kit x1
Shower Hook x1
Accessory Storage Bag x1
User Manual x1

INSTALLATION
STEP 2
Slot the shorter bolts into the back of the
aluminium frame, and slide the bolts to align
with the holes on the L brackets.
STEP 3
Insert the bolts through the holes on the L
brackets. Add and tighten the nuts on the back.
Tip: If you are doing this by yourself, tie a strap
around one end of the travel bag, so you can
focus on the other end without it falling down.
STEP 1
(1) If you mount your shower tent to a
platform rack, you won't need to use the
sandwich plates or the longer bolts.
Instead, use T-bolts (not included) and
bolt the L brackets directly to the rack.
Note: Please position the brackets to clear
your vehicle or your trailer body panels.
(2) If you mount your shower tent to the
mesh of a roof rack, the L brackets go on
top of the mesh and the sandwich plates
underneath. Use the long bolts to sandwich
them together.
4

SETUP
STEP 1
Unzip the shower tent bag and release the
straps, allowing the fabric to be released.
STEP 2
Move the arms outwards and lock in place.
STEP 3
Unfold the fabric and allow it to hang. You
can adjust the straps at the top to achieve
the required height from the ground.
STEP 4
Peg out the four corners and tension the
straps as required.
STEP 5
Plug the USB Type A connector of the LED
light strip to the USB Type A port of your
power source.
5

WARRANTY
San Hima warrants that each shower tent that is purchased while this Warranty is in effect will
be free from defects in materials and workmanship for a period of 1 year from the date of
receiving the product from San Hima or its authorized distributor/dealer. If it is believable to be
defective during the 1-Year Warranty Period, San Hima will, at its option, replace it with the
same or similar product, or issue a refund for the defective San Hima product. And San Hima
will pay for the cost of shipping or transportation of a defective component. This warranty
terminates if a Purchaser transfers the product to any other person. And please retain your
purchase receipt for Your records.
Please ensure that the San Hima shower tent should be installed and set up in accordance with
warnings and instructions listed in the user manual, and should be used for the purpose for
which it was designed.
Any and all warranty coverage does not cover: normal wear and tear, incorrect installation or
setup, damages as a result of failure to follow information in the user manual, unusual, improper
or negligent use or misuse, using the San Hima shower tent other than for the purpose for
which it was originally designed, improper repair or maintenance, alteration, abuse, acts of
nature, terrorism, vandalism or adverse conditions.
If further information or investigation is required or if the claim does not meet the requirements
under our warranty, San Hima'll let you know.