Sanction Industry SC-2322 User manual

Sanction aluminium alloy wheel chair
Model: SC-2322/SC-2322AB/SC-2322A/SC-2322A-AB
Instruction Manual
ISO13485
Index
Index ...............................................................................................................2
Introduction .....................................................................................................3
Warning ..........................................................................................................3
Product
description ......................................................................................................4
Installation .......................................................................................................5
Method of unfolding the
wheelchair .......................................................................................................6
Method of folding the
wheelchair .......................................................................................................6
Proper
Use .................................................................................................................7
Care &
Maintenance ........................................................................................... ..... 8
Specification ...................................................................................................8
Packing
List ..................................................................................................................8
2

Introduction
Thank you for choosing Sanction aluminium wheelchairs. Our products are made of
ultra-light aluminium alloy. It’s not easily rusty and easy to manage because they are
light weight. Before using this chair, you and each person who may assist you should
read this entire manual and make sure to follow all instructions.
Warning
•Do not exceed the weight capacity stated above. If you do exceed the limit,
damage to your chair, a fall, tip-over or loss of control may occur and cause
severe injury to the rider or others.
•Do not accelerate. Turning sharply and braking emergently during
accelerating can lead to turnover of the wheelchair.
•Use both left and right brake when getting on and down the wheelchair.
• Do not put your finger into the folding place of the back
rest fold device. → ( SC-2322A & SC-2322A-AB )
•Do not put your fingers under the seat tube
when unfolding the wheelchair. ←
•Do not tread on the foot rest to get
on and down the wheelchair. →
•Use toggle brakes to brake the left
and right wheels when getting on and
down of the wheelchair. →
3
Product Description
(use your own product description)
1.Pushing handle 2.AB Brake(Handle brake) 3.Armrest
4.Pu tire 5.Seat fork 6.Front wheel 7.Back pad
8.Skirt-guard board 9.Brake 10.Cushion 11.Leg rest
12.Pedal 13 Rear Wheel 14.Fold down back
4

Installation
1.Slowly push down with the
palms faced inside & flatten. ←
2.loosen up the screw nut
under the foot rest. →
3. Turn the foot rest inside, fasten,
and lock up. ←
4. Put down the foot rest to
horizontal. →
5. Push the fold down back . ←
( SC-2322A & SC-2322A-AB)
5
Method of Unfolding the Wheelchair
1. Hold the pushing handles and undrawn the frame to
left
and right side. (Provide own picture) →
2. Use the palm to press the side of the seat.
(Provide own picture) ←
Method of Folding the Wheelchair
1. Pack with the foot rest faced to each sideway.
←
2. Pull up from the middle of the seat. →
3. Press the plate. →
(SC-2322A & SC-2322A-AB)
6

4. push down. ←
(SC-2322A & SC-2322A-AB)
5. finish packing. →
(SC-2322A & SC-2322A-AB)
Proper Use
Adjusting the height of Foot Plate:
1. Turn the footplate in the direction of the arrow and adjust the height.
Tighten the nut at the side of the step pipe with the spanner provided.
2. Adjust the height of the foot rest according to the length
of your leg.
Using the brake:
1. Toggle both brake levers backwards to lock chair. To release the brake,
toggle it forward.
2. Brakes at the handles are only for reducing speed. Remember to apply
both brakes simultaneously. To lock the chair, the brake levers must be
applied.
Brake: Push forward. ↓ AB Brake: hold with both hands. ↓
(SC-2322AB & SC-2322A-AB)
7
Care & Maintenance
1. Do regular checks to ensure that bolts, nuts, brakes, wheels and other
components are intact and tightened.
2. The tyre should have enough air in it to maintain air pressure.
3. Use a damp cloth to wipe away dirt on wheelchair. Dry with a dry cloth to
prevent rusting.
Specification
All dimensions are based on the wheelchair in its default Configuration
Aluminium frame in sliver paint
Attendant brakes
7” front wheels & 22” rear wheels
Seat height 46cm
Seat width 16”&18”
Weight limit 100kg
Weight of wheelchair is 13kg
Packing List
Each wheelchair comes with,
1. Spanner
2. Instruction manual
3. Wheelchair frame with fixed armrest
8