Sanction Industry SC-BB1-AB User manual

Attention ! Dangerous actions
To avoid the wheelchair
overturning , do not
stand on the footrests
while standing up .
To ensure your safety and
keep the wheelchair from
sliding , please fix both
brakes on the rear wheels
first before off the wheel-
chairs , swing away the foot-
rests and then stand on the
ground .
E-MAIL:[email protected]inet.net
SANCTION INDUSTRY CO.,LTD.
http://www.sanction.com.tw/
SANCTION ALUMINUM ALLOY WHEELCHAIRS
INSTRUCTION MANUAL
STYLE NO:SC-BB1-AB
Very appreciated to use our Aluminum Alloy Wheelchairs . Our
wheelchairs are made of super-light , anti-rusty Aluminum Alloy .
They are easy to use and convenient to carry out . To avoid an
incorrect assembling causing the damage of the wheelchairs or
hurt yourself , please read the instruction manual first before
starting to assemble , or no compensation will be paid if get hurt .
If there are any quality problems on our products or assembling
difficulty , please contact our nearest sell agency , or call us on
05-268-4897(Monday - Friday , 8:00am-5:00pm) . We will be
very glad to offer our service wholeheartedly .
Be careful the position of your
fingers while unfolding the seat .
Keep from getting hurt by clamp-
ing of the frame .
ISO13485

SC-BB1-AB
ALUMINUM ALLOY WHEELCHAIRS
SPREAD OUT STOP THE WHEELCHAIR COLLAPSEFOOTRESTS
1. Pull both sides of the
seat from the middle .
1. Put your hands on the
tubes of the seat . and
then press down the seat
slowly .
1. Unlock the screw with a
hexagon wrench .
1. For the user-Push the
brakes forward .
2. Finish folding .2. Press down until the seat
being flat .
2. Take out the screw and ad-
just the available height .
2. Stuck the brakes on the
rear wheels to stop the
wheelchairs .
3. Choose the needed height
and then screw on .
3. For the care giver-Press
and hold the brakes on
the handles .