Santec SQUARE E Series User manual

E-SERIES SERIES
SQUARE COLLECTIONS
PAPER HOLDER
MODEL: 2465SQ10
2465SQ75
KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE
Important : Please register your product online at www.santecfaucet.com within
30 days of purchase. Santec reserves the right to request additional documents
before servicing warranty requests.
01 02
Installation Instructions
Place the post against the assigned wall location. Make sure that the holder is leveled. Mark the holder
post position.
1.
Using the Allen key provided, remove the holder post from the mounting post. Press the mounting post
against marked post position on the wall and mark the screw hole positions.
NOTE: MAKE SURE THE ALLEN SCREW HOLE ON THE MOUNTING POST IS FACING DOWN
WHEN SECURING TO WALL.
INSTALLING ON WOODEN SURFACE
For wooden surface, the mounting post can be
secured by screwing the screws directly into the wall.
INSTALLING ONTO DRYWALL SURFACE
Using a drill, pre-drill holes for the anchors. Insert the
anchors into the wall. The mounting post can be
secured by screwing the screws into the anchors.
INSTALLING ONTO A SOLID SURFACE
Measure the dimensions carefully. Using a drill,
pre-drill the holes. Secure the mounting post by
screwing the screws into the wall.
2.
holder post
holder post mark
mounting post
WALL
7
8
"
61
2
"
415
16
"
17
16
"
23
4
"

03
Installation Instructions
Press the holder post over the mounting post. Align the holder and secure it by tightening the set
screw.
3.
Check the holder post to make sure it is rmly secured. If not, tighten the set screw with the Allen key.4.