Sanyo PLC-XP57L User manual

5500 ANSI LUMENS zTRUE XGA zMULTIMEDIA PROJECTOR
Issued 5/06 © 2006 SANYO
PLC-XP57L
XGA Portable Multimedia Projector
* Lens sold separately ** Image shows PLC-XP57L w/ LNS-S30
5,500 ANSI LUMENS LCD PROJECTOR
Utilizing high-output 318-watt UHP lamps as its light source,
the PLC-XP57L delivers an amazing 5,500 ANSI lumens of
brightness. Stacking two projectors in the twin-stack
configuration can achieve up to 11,000 ANSI lumens of
brightness.
OUTSTANDING CONTRAST RATIO – 1000:1
PLC-XP57L contains an optical compensator with a High-
Contrast Optical System that achieves a contrast ratio as large
as 1000:1, exhibiting more natural and smooth gradation.
FULL 10-BIT DIGITAL IMAGE PROCESSING
With an IC that uses a full 10-bit digital processing, PLC-XP57L
delivers four times more color gradation steps than a
conventional projector. As a result, it projects beautiful images
with impressive color precision, rendering even tiny nuances in
expressive details.
NETWORK CONTROL WITH PJ-NET ORGANIZER PLUS II
An optional PJ-Net Organizer Plus II allows for simple control
and management of projectors via a CAT5 network connection.
The user can use an optional network management software
called PJ Master, and be able to centrally control all PJ-Net
Organizer-mounted projectors within the network. The PJ-Net
Organizer Plus II has SNMP capability and allows connected
computers to capture and modify the projected image, so other
users will be able to write texts and draw figures on the
captured image on their computers using drawing tools.
UPWARD / DOWNWARD PROJECTION
The PLC-XP57L can be tilted upward to facilitate ceiling-mount
and floor mount installation.
VERTICAL/HORIZONTAL EDGE ENHANCEMENT
Images so crisp and smooth that is only made possible by the
seamless edge enhancement technique. Enhancing image
outlines while minimizing granular noise emphasis, the PLC-
XP57L generates sharp and realistic images.
24/7* OPERATION
A newly developed liquid crystal panel with an optical
compensator that creates linear polarization, together with
improved optical block cooling system, gives the PLC-XP57L
the capability of being operated on a 24/7* basis.
* In order to maintain a stable lamp condition, at least one hour of rest for the
projector is required in each 24-hour period.
* For appropriate care and use of the projector, regular cleaning of air filters is
necessary. Cleaning is recommended once a week. However, the frequency on
which cleaning is required depends upon the installation or operation environments.
* To enhance ventilation and related reliability, the user may choose to utilize
optional external filter “POA-FBOX130”.
PRESENTATION TECHNOLOGIES
21605 Plummer Street
Chatsworth, CA 91311
Ph: 888-337-1215 (toll-free)
Fax [phone]
www.sanyolcd.com
Specifications
Resolution XGA (1024 x 768)
Brightness (typical) 5500 ANSI Lumens
Uniformity 90%
LCD Panel System 1.3” TFT Poly-Silicon x 3
Number of Pixels 2,359,296 (786,432 x 3)
Contrast Ratio 1000:1 (full on/off)
Projection Image (diagonal) 31” - 400”
Aspect Ratio 4:3
Throw Distance Dependent on Lens (4.6’ - 48.2’ w/ LNS-S30)
Zoom/Focus Dependent on Lens
Up/Down Ratio 1:1 (LNS-W32) or 10:0 - 1:1 (others)
Digital Keystone Correction Vert. +/- 35°, Horiz. +/- 15°
Projection System Dichroic mirror & X prism w/ PBS
Projection Lens Lens Sold Separately
Lens Throw Ratio Dependent on Lens (1.8-2.3:1 w/ LNS-S30)
Projection Lamp 318W UHP
Scanning Frequency H 15-100kHz; V 48-100Hz (auto sense/select)
Dot Clock 180 MHz
Color System PAL/PAL-M/PAL-N/SECAM/NTSC/NNTSC4.43
Computer Compatibility UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA
Sound Output Two-piece stereo 2W rms
Voltage 100-240V AC; 50/60/Hz (auto sense/select)
BTU Rating 1638
dB Rating 36.0 (Eco mode)
Power Consumption 480W
Dimensions (WxHxD) 12.6” x6.6”x16.9”
Net Weight 17.4 lbs.
User Maintenance Clean air filters, replace lamp assembly
Input Terminal Panel 1 D-Sub 15 x1(In/Monitor Out) •DVI–D x1 (w/HDCP)
•Audio x1 (In/Monitor Out : stereo mini jack)
Input Terminal Panel 2 RGBHV or Composite/Component Video (BNC x5)
•Audio x1 (stereo mini jack)
Input Terminal Panel 3 Composite/Component Video (RCA x3)
•S-Video x1 •L & R Audio (RCA x2)
Additional Input Terminals Wired remote control jack x 1 (stereo mini jack)
•USB x 1 (type B) •Control Port x 1 (Mini Din 8-pin)
Output Terminals D-Sub 15 x 1(Input1/Monitor Out) •Variable audio x1
(Input1/Monitor Out : stereo mini-jack)
Included Accessories Wired/Wireless I/R Remote Control w/Mouse Pad and
Laser Pointer •Batteries (two “AA”) •AC power cord •
VGA Cable •Serial/USB Control Cables •PIN label •Lens
Attachment (POA-LNA03) •Owner’s manual (CD-ROM &
Quick Manual) •Lens Replacement Manual
Optional Accessories •PJ-Net Organizer Plus II (POA-PN03) •Filter Box
(POA-FBOX130) •POA-FIL130 (Replacement Filter for
POA-FBOX130) •Replacement Lamp (6103287362) •
Optional Lenses (see below)
Warranty Three years parts and labor; 90 days original lamp;
Quick Repair Program under warranty
Because its products are subject to continuous improvement, SANYO reserves the right to
modify product design and specifications without notice and without incurring any obligations.
Optional Lens Specifications
Standard On-Axis
Short Fixed
Short Zoom Long
Zoom
Ultra Long
Zoom
Part No. LNS-S30 LNS-W32 LNS-W31A LNS-T31A LNS-T32
Zoom Power No Power Power Power
Throw
Ratio
1.8 - 2.3:1 0.8:1 1.25 - 1.8:1 2.3 - 4.2:1 4.2 - 6.0:1
U/D
Ratio
10:0 - 1:1 1:1 10:0 - 1:1 10:0 - 1:1 10:0 - 1:1
F Stop 1.8 - 2.1 2.6 2.5 - 3.1 2.0 - 2.9 2.1 - 2.7
Length 6.02” 9.25” 7.6” 8.5” 4.6”
Weight 1.8 lbs. 3.5 lbs. 3.7 lbs. 4.2 lbs. 3.7 lbs.