Sanyo PLC-XW250 User manual

PLC-XW250
PLC-XW200
Ultra Portable Multimedia Projector
Easy Setup for Education and Business Use

Replacement Lamp Type No.: 610 345 2456
*1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2 For analog signal only, limitations on certain output signals. Does not support all types of input signals.
* Specifications as of June 2, 2009, subject to change.
*3 Lamp life may vary due to room conditions, usage, and maintenance. The replacement time is a general estimate.
The brightness of a lamp usually decreases over time and use.
* All product names and company names are trademarks or registered trademarks of their respective companies.
SANYO Presentation Technologies
© 2009 SANYO North America Corporation.
Toll free: 888-337-1215 www.sanyoprojectors.com
PLC-XW250 / XW200 provides a “Auto Setup Function”
that does auto keystone correction by searching for an
input signal and detecting projector incline, reducing setup
time. Furthermore, the “Screen Guidance Function” allows
projector set up according to the displayed guidance. This
function provides an easy guide to
using the projector.
SANYO’s first ecological data projector with 0.4 W standby power
consumption. By redesigning electrical circuits, a standby power
consumption savings of about 80% was achieved compared to a
conventional model.
This model is equipped with Wired LAN (RJ-45) that allows you to manage
and control projector via Network. It is possible to check the operating time of
lamp and manage the warning notification by Email. Power ON/OFF and
switching of input signal can be controlled. You can save a lot of time without
manage and control.
The compact design (13.1 x 3.4 x 9.7 inch) and light weight body (5.5 lbs) let
you make presentations almost anywhere.
The PLC-XW250 provides outstanding brightness of 2,600 lumens, while the
PLC-XW200 delivers 2,200 lumens of brightness.
The projector can be turned off by unplugging the cable without pressing the
power button. You can pack up and leave quickly.
• D-sub 15pin for Input (VGA), D-sub 15pin for Input or Monitor out
• 18 languages (Operation menu)
• Color board (4 color) mode, Security: PIN code lock, Key lock
Easy Setup Easy to Use
Environment friendly power consumption in standby mode
(Eco): 0.4 W
Wired LAN (RJ-45) for projector control
Light Weight and Compactness for Greater Portability
Bright Images Even In a Well-Lit Room
Instant Off Function
Other Features
PLC-XW250
PLC-XW200
Specifications
Model name PLC-XW250 PLC-XW200
Panel 0.55 inch TFT p-Si x 3
Resolution 1024 x 768
Lamp wattage 220 W UHP
Brightness (Lamp mode:
“High” & Image mode: “Dy-
namic”)*1
2600 lm 2200 lm
Contrast *1 500:1
Uniformity *1 85% (corner to center)
Projection lens F2.0 - 2.15 f=0.72 - 0.87 inch
Screen Size 40” - 300” (4.3 - 38.7 ft)
Zoom / Focus (10.8 - 12.8 ft) 1:1.2 Manual driven
SD/HDTV signals 480i, 480p, 575i, 575p, 720p, 1035i, 1080p
Color systems PAL / SECAM / NTSC / NTSC4.43 / PAL-M/N
Video Signal Composite, S-Video, Component
Computer Terminal
Dsub-15 x 1: Analog RGB Input (Component and S-
video input with conversion cable), D-sub15 x 1: Analog
RGB Input or Monitor out*2
Video Terminal RCA x 1: Composite video
Computer compatibility UXGA / WXGA / SXGA / XGA / SVGA / VGA / MAC
Audio Mini-Jack (stereo) x 1: Input (for Computer & Video),
Mini-Jack (stereo) x 1: Output (variable audio out)
Communication Terminal RJ-45 (LAN), Dsub-9pin (RS 232C)
Presentation Tool Freeze / Digital Zoom / No Show / etc
Other Features Progressive, 3-2 & 2-2 pull down, User Logo
Scanning frequency H sync 15 - 100 kHz, V sync 50 - 100 Hz
Dot clock 140 MHz
Sound output 1.0 W Mono
Fan Noise 29 dBA (Lamp mode “Eco”)
Voltage AC100-120V, AC 200-240V, 50/60Hz
Power consumption
100-120 VAC, 213 W
(Eco) / 273 W (Normal) /
296 (High)
100-120 VAC, 212 W
(Eco) / 239 W (Normal) /
272 (High)
Standby Power
consumption
100-120 V 0.4 W (Standby mode: Eco)
200-240 V 0.7 W (Standby mode: Eco)
Dimensions (W x H x D) 13.1 x 3.4 x 9.7 inch
Weight 5.5 lbs
Lamp Life*3
(hours Normal/Eco 4000H / 5000H (Normal / Eco)
Included accessories
Quick reference guide, Owner’s manual (CD-ROM),
CD-ROM read me note, CD-ROM (PJ-Net Manager
application software), PIN code Label, Lamp
replacement label, UL cable card, Power cord,
Computer cable (Dsub 15-Dsub15), Remote control,
AAA Battery x 2, Lens cap