Saramonic Blink900 User manual

User Manual
用户手册
Ultracompact 2.4GHz Dual-Channel
Wireless Microphone System
2.4GHz 迷你双通道无线麦克风系统
Blink900 S

Statement
Please read this manual carefully
before use and operate and store in
strict accordance with the instructions
provided. Please retain for future
reference.
For any issues that cannot be resolved
with the user manual, please refer to
your retailer for help or contact us at:
[email protected]
General Introduction
Adopt 2.4GHz wireless transmission
technology, the Saramonic Blink900 S is
an incredibly lightweight, ultracompact,
and easy-to-use wireless microphone
system for up to 2 people, delivering
exceptional, broadcast-quality sound.
With built-in rechargeable batteries,
the system provide long battery life for
daily recording.The operating range
can reach up to 200 metres.
With built-in omnidirectional
microphone, the small and light TXS
transmitter features 360-degrees of
sound pickup, ideal for capturing
natural-sounding dialog for video
productions, interviews, speech, and
many other applications. Multiple
functions are integrated into the power
button, making it easy to use.
The dual-channel RX receiver features
a selectable Mono / Stereo output
setting. A 3.5mm headphone jack is
available for real-time monitoring,
and the 3.5mm TRS output makes the
unit compatible with DSLR, mirrorless,
camcorders, recorders, mixers, and
more. It also features a high-resolution
LCD display that lets you see vital
information at a glance.
The magnetic belt clip of TXS
transmitter & RX receiver can be used
with the magnetic nameplate (sold
separately), which can be easily clipped
to shirts and clothing, or used with a
lanyard (sold separately) for hanging
on the neck.
The Blink900 RXDi receiver has a MFi
Certifified Lightning output and is
designed for iOS devices. And the
Blink900 RXUC receiver has a USB-C
output and is designed for devices
with a USB-C port, including Android
smartphones and tablets.
The Blink900 S2BOX charging
case allows you to charge the TXS
transmitters and RX receiver anywhere,
making the Blink900 S2 kit easy to
carry on.

①Power/Mute button
Mode Operation
Power ON/OFF Press and hold for 3
seconds
Mute ON/OFF Press
Enter pairing mode Press twice
②Power/Mute indicator
Mode Operation
Fully charged Static blue
Charging Static red
Low battery Blinks red rapidly
Mute ON Blinks red slowly
Note: Please charge the transmitter
in time when in a low battery status,
or it will auto shut off within 10 mins.
③Pairing indicator
Status Indicator
Successfully paired Static blue
Pairing Blinks blue rapidly
Unpaired Blinks blue slowly
④Built-in microphone
⑤USB-C charging port (DC 5V)
Use the included USB-C charging cable to
charge the transmitter.
⑥Charging contacts
⑦Magnetic belt clip
Product Structure
Blink900 TXS: clip-on
transmitter with built-in
microphone
② ③
①⑤
④
⑦
⑥
S

B 0 R
Blink900 RX: camera-
mountable clip-on receiver
①Power button
Press and hold the button for 2 seconds to
turn on/off the receiver.
②+/SET button
Function Operation
+
On home screen, short press
to increase output volume.
On menu screen, short press
to select different functions
or values shown on the
display.
SET
On home screen, long press
to enter the menu screen.
On menu screen, long press
to enter the displayed menu.
Then, long press again to
confirm your option.
③- button
On home screen, short press to decrease
output volume.
On menu screen, short press to select
different functions or values shown on
the display; long press to return to home
screen.
④LCD display
For more details, please refer to “LCD
Display Operation Guide”.
⑤USB-C charging port (DC 5V)
Use the included USB-C charging cable to
charge the receiver.
⑥Output jack
Connect the Blink900 RX to a camera,
recorder, or mixer with the included output
cable.
⑦3.5 mm headphone output
Connect headphones for audio
monitoring.
⑧Charging contacts
⑨Magnetic belt clip
⑩ Ambient light sensor
④
⑥
①
②⑤
⑦
⑨
③
10
⑧

①MFi Certified Lightning connector
It can be connected to an iOS Lightning
device.
②Paring indicator
Status Indicator
Successfully paired Static blue
Pairing Blinks blue rapidly
Unpaired Blinks blue slowly
③Mono/ Stereo toggle
The output mode can be set to Mono or
Stereo. When under Mono output mode,
the audio recorded by the two transmitters
will be in one channel. When under
Stereo output mode, the two transmitter's
audio will be separated into left and right
channels.
④Pairing pin-hole
⑤USB-C charging port
When the Blink900 RXDi is plugged into
an external device, the external device can
be powered via this charging port. This
port can also be connected to a USB-C
headphone to monitor the recording.
Blink900 RXDi: compact
receiver with Lightning
connector
①
②
③④
⑤
NOTE: iPhones and iPads can be powered
and charged through this port while in use.
Blink900 RXUC: compact
receiver with USB-C ronnec tor
①
②
③④
⑤
①USB-C connector
It can be connected to Android
Smartphones, Tablets, Computers and
other USB-C devices.
②Paring indicator
Status Indicator
Successfully paired Static blue
Pairing Blinks blue rapidly
Unpaired Blinks blue slowly
③Mono/ Stereo toggle
The output mode can be set to Mono or
Stereo. When under Mono output mode,
the audio recorded by the two transmitters
will be in one channel. When under
Stereo output mode, the two transmitter's
audio will be separated into left and right
channels.
④Pairing pin-hole
⑤USB-C charging port
When the Blink900 RXUC is plugged into
an external device, the external device can

Blink900 S2BOX: portable
charging case
①Charging contacts
②Indicator button
Press to light up the indicator and display
current battery level of the charging case.
③Battery level indicator
④USB-C charging port (DC 5V)
Use the included USB-C charging cable to
charge the case.
④
②③
LCD Display Operation
Guide
Wireless Receiver Blink900 RX
①④ ⑤ ⑥③② ⑦
Home screen
If no operation is performed within 20
seconds on menu screens, the display
will automatically return to home
screen.
①Channel icon
/ Indicates channel A/B is
successfully paired.
/ Indicates channel A/B is
unpaired.
off / off Indicates channel A/
B is turned off.
②Audio input level meter
Displays the audio input level.
③RF level indicator
Indicates the current signal level.
Signal is strong (Successfully
paired)
Signal is weak (Successfully
paired)
Unpaired
RT ST S
①
be powered via this charging port. This
port can also be connected to a USB-C
headphone to monitor the recording.
NOTE: Most USB-C devices can be
powered and charged through this port
while in use.

④TXS’s battery level indicator
Displays the battery level.
Please recharge the transmitter
immediately as soon as the
indicator starts flashing.
⑤RX’s output mode
: Mono : Stereo
⑥Output volume
⑦RX’s battery level indicator
Displays the battery level. Please
recharge the receiver immediately
as soon as the indicator starts
flashing.
Menu screen
Channel Setting
Turn on/off the channel A/B.
Default setting:
Channel A : On Channel B : Off
Output Volume Setting
Output volume can be set from 0 to 9.
Default is “6”. (The setting is retained
even after the unit is turned off.)
Output Mode Setting
The output mode can be set to either
mono or stereo. When in mono mode,
the audio from the transmitter, or
transmitters will be mixed to both the
left and right sides. When in stereo
mode, the two transmitters' audio
output will be separated to the left and
right sides. Default is mono.
Backlight Setting
Set backlight to always on or on for
10/30/60 seconds. Default is “On”.

Brightness Setting
You can set the brightness to “Auto”
or manually select a value within the
range of 1-10. Default is “7”.
Language Setting
English and Chinese are available.
Default is English.
Pairing
Select “Yes?” to pair the receiver
with the transmitter. For details of
operation, please refer to “Operation
Guide”.
Restore Default Setting
Version of the Blink900 RX
Operation Guide
For the kit of Blink900 S1/ Blink900 S2
1. Long press the power button to
turn on the transmitter(s) and the
receiver.
2. Pairing.
Before leaving factory, the system is
pre-paired. Therefore, the connection
will be established once they are
powered on. If they are disconnected,
please follow below steps:
①Long press the SET button to make
the receiver enter menu screen.

②Use the + or - button to display the
Pair menu on receiver.
RX
③Long press the SET button to select.
④Select Yes, then long press the SET
button to confirm. The receiver enters
pairing mode.
RX
⑤Press the transmitter(s)' power
button twice to make the transmitter(s)
pairing mode, and blinks blue
rapidly.
⑥Transmitter(s) and receiver will be
successfully paired within 10 seconds.
turns static blue.
3. Connect the receiver to a camera,
recorder or mixer with the included
3.5 mm TRS to TRS audio output
cable.
4. You are ready to record.
For the kit of Blink900 S3/ Blink900
S4/ Blink900 S5/ Blink900 S6
1. Long press the power button for 3
seconds to turn on the transmitter(s).
2. Plug the Blink900 RXDi into an iOS
Lightning device or the Blink900 RXUC
into a USB-C device.
3. Pairing
Before leaving factory, the system is
pre-paired. Therefore, the connection
will be established once they are
powered on. If they are disconnected,
please follow below steps:
① Press the transmitter(s)’ power
button twice to enter the pairing
mode, and blinks blue rapidly.
② Insert the pairing pin into the
pairing pin-hole of the receiver and
press hard. It’s paring indicator blinks
blue rapidly.
4. Transmitter(s) and receiver will be
successfully paired within 10 seconds.
The pairing indicators of both will turn
static blue.
5. You are ready to record.
Note:
(1) When pairing two transmitters to
one receiver, if one of the transmitters
fails to be paired, please turn off the
transmitter that has been successfully
paired, and then repeat the pairing
operation to pair the transmitter with
the receiver.
(2) Due to the 2.4GHz wireless
frequency is widely used, the signal
may be easily attenuated or interfered.
Please try to avoid obstacles while
using, such as walls and buildings.
And keep away from the devices with
2.4GHz frequency, such as high-power
Wi-Fi antennas, radios, etc.

Accessory List Diagram Presentation
Saramonic
Lanyard with
Holder
Saramonic
Magnetic
Nameplate
Charging Guide
Please recharge the device when
battery is low.
1. Charge the transmitter/receiver
①Use the charging case to charge the
transmitter/receiver.
Place the transmitter and the receiver
into the charging case to start
charging.
2. Charge the charging case
Use the included USB-C cable to
charge the charging case
②Use the included USB-C cable to
charge the transmitter/receiver.
Note:
The transmitter/receiver will
automatically turn off after being
placed in the charging case.
Using Other Accessories
(sold separately)
Charging (Blinks blue
in cycle)
T R
B 0 T
T
B 0 R
B 0 T

1× Blink900 TXS Transmitter
1× Blink900 RX Receiver
1× Fur Windshield for Built-in Microphone
2× USB-C Charging Cable
1× 3.5 mm TRS to TRS Output Cable
for Cameras
1× Carrying Case
2× Blink900 TXS Transmitter
1× Blink900 RX Receiver
2× Fur Windshield for Built-in Microphone
3× USB-C Charging Cable
1× 3.5 mm TRS to TRS Output Cable
for Cameras
1× Carrying Case
Blink900 S3 Kit
1× Blink900 TXS Transmitter
1× Blink900 RXDi Receiver
1× Fur Windshield for Built-in Microphone
1× USB-C Charging Cable
1× Pairing Pin
1× Carring Case
Blink900 S4 Kit
2× Blink900 TXS Transmitter
1× Blink900 RXDi Receiver
2× Fur Windshield for Built-in
Microphone
2× USB-C Charging Cable
1× Pairing Pin
1× Carring Case
Packing List
Blink900 S1 Kit
Blink900 S2 Kit
Blink900 S5 Kit
1× Blink900 TXS Transmitter
1× Blink900 RXUC Receiver
1× Fur Windshield for Built-in Microphone
1× USB-C Charging Cable
1× Pairing Pin
1× Carring Case
Blink900 S6 Kit
2× Blink900 TXS Transmitter
1× Blink900 RXUC Receiver
2× Fur Windshield for Built-in
Microphone
2× USB-C Charging Cable
1× Pairing Pin
1× Carring Case
Blink900 S2BOX
1× Blink900 S2BOX Charging Case
1× USB-C Charging Cable
Blink900 S20 Kit
2× Blink900 TXS Transmitter
1× Blink900 RX Receiver
2× Fur Windshield for Built-in Microphone
1× USB-C Charging Cable
1× 3.5 mm TRS to TRS Output Cable
for Cameras
1× Blink900 S2BOX Charging Case

Specifications
Blink900 TXS
Mic Capsule 4 mm built-in capsule
Polar Pattern Omnidirectional
Transmission Type 2.4GHz digital frequency
Operating Range (Without Obstacle) Up to 200m
Frequency Response 20Hz-20kHz
Maximum SPL 100dB SPL (1kHz @ 1m) dBu
SNR ＞80dB
Sampling Rate 48kHz
Bit Rate 24bit
Distortion ≤0.1%
Power Requirements Built-in battery (280mAh)
Built-in Battery Life Approx. 5 hours
Antenna Built-in FPC antenna
Weight Approx. 19.5 g (0.69 oz)
Dimensions 36×36×12.5 mm
Blink900 RX
Transmission Type 2.4GHz digital frequency
Operating Range (Without Obstacle) Up to 200m
Frequency Response 20Hz-20kHz
Maximum SPL 100dB SPL (1kHz @ 1m) dBu
SNR ＞80dB
Sampling Rate 48kHz
Bit Rate 24bit
Distortion ≤0.1%

Audio Output Connector 3.5 mm headphone jack
3.5 mm TRS line out jack
Power Requirements Built-in battery (450mAh)
Built-in Battery Life
Approx. 6 hours (working with two transmitters)
Antenna Built-in FPC antenna
Weight Approx. 35.3 g (1.25 oz)
Dimensions 46×46×16.4 mm
Blink900 RXDi
Transmission Type 2.4GHz Digital Frequency
Operating Range (Without Obstacles) Up to 150m
Frequency Response 20Hz-20kHz
Audio Output Connector MFi Certified Lightning Connector
Power Requirements Supplied by iOS Devices
Antenna PIFA Antenna
Weight Approx. 13 g (0.46 oz)
Dimensions 78×16.5×10.9 mm
Blink900 RXUC
Transmission Type 2.4GHz Digital Frequency
Operating Range (Without Obstacles) Up to 150m
Frequency Response 20Hz-20kHz
Audio Output Connector USB-C Connector
Power Requirements Supplied by USB-C Devices
Antenna PIFA Antenna
Weight Approx. 12.5 g (0.44 oz)
Dimensions 78×16.5×10.9 mm

Blink900 S2BOX
Power Requirements Powered by USB-C Port (5V/1.5A)
Battery Capacity 4500mAh
Case's Charging Time ＜4 hours
Weight Approx. 278 g (9.81oz)
Dimensions 186×87.2×51 mm

声明
请在使用前仔细阅读本手册，并严格按
照说明进行操作和存储。请保存以供将
来参考。如果用户手册不能帮助您解决某
些问题，请向零售商寻求帮助或给我们发
送电子邮件：[email protected]
概述
枫笛 Blink900 S 是一款轻巧便携、操作
简单的 2.4GHz 双通道无线麦克风系统，
提供出色的广播级音质。本系列中，
Blink900 TXS 和 Blink900 RX 内置可充电
电池，为您的录音提供超长续航；其无
障碍操作范围最远可达 200 米。
轻薄小巧的 TXS 发射器内置全向型麦克
风，能够 360°拾音，是视频创作、采访、
演讲等应用场景的理想选择。多个功能
集电源键一体，操作十分简单。
双通道 RX 接收器可自由切换单声道和立
体声模式。3.5 mm 耳机输出提供实时监
听；3.5 mm TRS 输出孔适用于单反、无
反相机、摄像机、录音机、调音台等设备。
其高分辨率 LCD 显示屏可以一目了然地
查看重要信息。
TXS 发射器与 RX 接收器的背夹带有磁吸
功能，可搭配磁吸铭牌（单独出售），
轻松吸附在衣领上使用，也可配合挂绳
支架（单独出售），戴在颈脖上使用。
Blink900 RXDi 接 收 器 具 有 MFi 认 证 的
Lightning 接 头， 专 为 带 Lightning 接 口
的 iOS 系 统 设 备 设 计；Blink900 RXUC
接收器具有 USB-C 接头，专为像安卓手
机、平板电脑等带有 USB-C 端口的设备
设计。
Blink900 S2BOX 充电盒可为 TXS 发射器
和 RX 接收器提供移动电源，便于出行携
带。

产品结构
Blink900 TXS: 背夹式发射器
（带内置 麦 克风）
② ③
①⑤
④
⑦
⑥
S
① 电源键 / 静音键
功能 操作
开/关机 长按按键 3 秒
静音开启 / 关闭 短按按键
进入对码状态 双击按键
② 电源 / 静音指示标识
模式 指示灯
充满电 蓝灯常亮
充电中 红灯常亮
低电量 红灯快闪
静音开启 红灯慢闪
注意：发射器处于低电量时请及时充
电，否则发射器将在 10 分钟内自动
关机。
③ 对码指示标识
状态 指示灯
联机成功 蓝灯常亮
对码中 蓝灯快闪
未联机 蓝灯慢闪
④ 内置麦克风
⑤ USB-C 充电口（直流电 5V）
使用随附的 USB-C 充电线进行充电。
⑥ 充电触点
⑦ 磁吸背夹

B 0 R
Blink900 RX: 背夹式接收器
（可安装至相机热靴座）
④
⑥
①
②⑤
⑦
⑨
③
⑧
10
① 电源键
长按电源键 2 秒，可开启 / 关闭接收器。
② +/SET 键
功能 操作
+
在主界面上，短按 + 键增大输
出音量；
在菜单界面上，短按 + 键调整
各参数值或功能。
SET
在主界面上，长按设置键进入
菜单界面；
在菜单界面，长按设置键进入
选定界面，再次长按保存设定
③ -键
在主界面上，短按 - 键减小输出音量；
在菜单界面上，短按 - 键调整各参数
值或功能；长按 - 键回到主界面。
④ LCD 显示屏
详情参考“LCD 屏幕操作指南”。
⑤ USB-C 充电口（直流电 5V）
使用随附的 USB-C 充电线进行充电。
⑥ 输出孔
使用随附的转接线，将 Blink900 RX
连接至相机、录音笔或混音器等设备。
⑦ 3.5 mm 耳机插孔
接入耳机进行音频监听。
⑧ 充电触点
⑨ 磁吸背夹
⑩ 感光元器件

Blink900 RXDi：迷你接收器
（带 Lightning 接口）
①
②
③④
⑤
① MFi 认证 Lightning 接头
可接入带 Lightning 接口的 iOS 设备。
② 对码指示灯
状态 指示灯
联机成功 蓝灯常亮
对码中 蓝灯快闪
未联机 蓝灯慢闪
③ 单声道 / 立体声切换键
输出模式可以设置单声道或立体声。
在单声道模式下，两个发射器录制的
音频将合并在一条音频通道里输出。
在立体声模式下，两个发射器的音频
将分配到左右两个独立声道里输出。
④ 对码孔
⑤ USB-C 充电孔
当 Blink900 RXDi 接收器插入外部
设备时，此端口可接入 USB-C 耳机
进行音频监听，也可为外部设备如
iPad、iPhone 充电。
Blink900 RXUC：迷你接收器
（带 U S B - C 接 口）
①
②
③④
⑤
① USB-C 接头
可连接至安卓手机、平板、电脑或其
他 USB-C 设备。
② 对码指示灯
状态 指示灯
联机成功 蓝灯常亮
对码中 蓝灯快闪
未联机 蓝灯慢闪
③ 单声道 / 立体声切换键
输出模式可以设置单声道或立体声。
在单声道模式下，两个发射器录制的
音频将合并在一条音频通道里输出。
在立体声模式下，两个发射器的音频
将分配到左右两个独立声道里输出。
④ 对码孔
⑤ USB-C 充电孔
当 Blink900 RXUC 接收器插入外部设
备时，此端口可接入 USB-C 耳机进
行音频监听，也可给大部分 USB-C
设备充电。

RT ST S
Blink900 S2BOX: 便携式充
电盒
①
④
②③
① 充电触点
② 电量检测键
按下此键，电量指示灯亮起，显示充
电盒当前电量。
③ 电量指示灯
④ USB-C 充电孔（直流电 5V）
无线接收器 Blink900 RX
①④ ⑤ ⑥③② ⑦
LCD 屏幕操作指南
主界面
若超过 20 秒不操作，显示屏会自动跳转
回主界面上。
① 通道开关图示
/ 表示 A/B 通道已连接。
/ 表示 A/B 通道未连接。
off / off 表示 A/B通道已关闭。
② 实时输入电平指示
显示实时输入电平大小
③ 射频信号强度指示
用来指示当前信号强度。
信号最强（配对成功）
信号最弱（配对成功）
未联机
④ 发射器电量指示
显示发射器当前电量。当图标开始闪
烁时，请及时为发射器充电。
⑤ 接收器输出模式
: 单声道 : 立体声
⑥ 输出音量
⑦ 接收器电量指示
显示接收器当前电量。当图标开始闪
烁时，请及时为接收器充电。

通道设置
开启 / 关闭通道 A/B。
默认设置：通道 A: 开启 通道 B：关闭
输出音量设置
音量调节范围为 0-9，默认设置为“6”。
（即使在电源关闭后，该参数设定仍然
保留。）
输出模式设置
输出模式可以设置为单声道或立体声。
设置为单声道模式时，音频将混合到左
右两边。设置为立体声模式时，两个发
射器的音频输出将左右分开。默认设置
为“单声道”。
菜单界面
背光时间设置
背光灯时间可设置为常亮、10 秒、30 秒、
或 60 秒，默认设置为“常亮”。
亮度设置
可将亮度设置为“自动”或在 1-10 范围
内手动设置亮度。默认设置为“7”。
语言设置
English/ 简体中文可供选择，默认设置为
“English”。
恢复默认设置