sauter CP 50-3P8 User manual

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [email protected]
Tel.: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.sauter.eu
User manual / Data sheet
SAUTER CP P8
V. 1.0
10/2022
GB
CP P8-BA-en-2210.docx

2 CP P8-BA-en-2210.docx
GB
SAUTER CP P8
V. 1.0 10/2022
User manual / Data sheet
Summarize:
1Introduction.................................................................................................... 3
1Brief description ............................................................................................ 3
2Available models............................................................................................ 3
3Introduction.................................................................................................... 3
4Warnings ........................................................................................................ 3
5Warranty......................................................................................................... 4
6Technical data................................................................................................ 4
7Electrical connection..................................................................................... 5
8Dimensions in mm......................................................................................... 5
9CE declaration................................................................................................ 6

CP P8-BA-en-2210.docx 3
1 Introduction
1 Brief description
•Single-point anodised aluminium load cell
•Protection class IP65 (according to EN 60529)
•RoHS compliant
•Suitable for price computing scales, table scales, etc.
•Maximum platform size: 600 x 600 mm
•Accuracy class C3 according to OIML R60
•OIML certified
•Optional on request: Accuracy class C4 / C5
2 Available models
Nominal
load
Model
50kg
CP 50-3P8
100kg
CP 100-3P8
150kg
CP 150-3P8
200kg
CP 200-3P8
250kg
CP 250-3P8
300kg
CP 300-3P8
500kg
CP 500-3P8
600kg
CP 600-3P8
3 Introduction
Please observe the information in the operating instructions: Read these operating
instructions carefully before commissioning, even if you already have experience with
SAUTER measuring cells.
After receipt of the measuring cell, it should be checked in advance whether there has
been any transport damage, whether the outer packaging or other parts or even the
item itself have been damaged. If any damage is apparent, please notify SAUTER
GmbH immediately.
4 Warnings
Observe the national accident prevention regulations.
Incorrect use of the measuring cells can lead to serious injury, death, property damage
and personal injury. Use may only be carried out by trained and experienced
personnel.
Never load measuring cells beyond the Emax range (nominal load, max. capacity).
Overloaded measuring cells no longer have the required accuracy. Overloaded or
deformed measuring cells must not be used any longer and must be replaced
immediately.
Never step under suspended loads.

4 CP P8-BA-en-2210.docx
Always fit overload or breakage protection to your system.
Always observe the permissible static and dynamic loads of the accessories you are
using.
Have measuring cells calibrated at regular intervals.
Load the measuring cell only in its specified loading direction. Avoid transverse forces.
Check measuring cells regularly for deformations and cracks.
5 Warranty
The warranty expires in the event of:
•Disregarding the specifications in the operating instructions
•Changing or opening the measuring cell
•Overload
•Mechanical damage
•Damage due to liquids or media
•Natural wear and tear
•Improper set-up or electrical installation
6 Technical data
Output sensitivity ( FS )
mV/V
2.0 ± 0.2
2.0 ± 0.2
Maximum capacity ( Emax )
kg
50, 100, 150, 200, 250, 300, 500 , 600
Max.number of load cell
intervals
nLC
3000
Ratio of min. LC verification
interval
Y = Emax
/ vmin
10000
Combined Error
%FS
≤± 0.020
Minimum dead load
Of Emax
0%
Safe overload
of Emax
120 %
Ultimate overload
of Emax
150 %
Zero balance
of FS
< ± 2.0 %
Excitation, recommended
voltage
V
5 ~ 12
Excitation maximum
V
18
Input resistance
Ω
409 ± 6
Output resistance
Ω
350 ± 3
Insulation resistance
MΩ
≥5000 ( at 50VDC )
Compensated temperature
°C
-10 ~+40
Operating temperature
°C
-35 ~ +65
Storage temperature
°C
-40 ~ +70
Recommended torque on
fixation bolts
Nm
20

CP P8-BA-en-2210.docx 5
7 Electrical connection
Shielded PVC cable, shield connected to element, cable diameter Ø5.9mm, standard
cable length: 3m
6-wire connection diagram
8 Dimensions in mm

6 CP P8-BA-en-2210.docx
9 CE declaration
The CE declaration can be downloaded from the website www.sauter.eu